Add spaces around arithmetic and bitwise operators to improve
readability of the code.
Signed-off-by: Tree Davies <tdavies@xxxxxxxxxxxxxxx>
---
drivers/staging/rtl8192e/rtllib.h | 62 +++++++++++++++----------------
1 file changed, 31 insertions(+), 31 deletions(-)
diff --git a/drivers/staging/rtl8192e/rtllib.h b/drivers/staging/rtl8192e/rtllib.h
index 76f53b797644..17a6fb565c9d 100644
--- a/drivers/staging/rtl8192e/rtllib.h
+++ b/drivers/staging/rtl8192e/rtllib.h
@@ -339,12 +339,12 @@ enum rt_op_mode {
#define FC_QOS_BIT BIT(7)
#define is_data_frame(pdu) (((pdu[0] & 0x0C) == 0x08) ? true : false)
-#define is_legacy_data_frame(pdu) (is_data_frame(pdu) && (!(pdu[0]&FC_QOS_BIT)))
+#define is_legacy_data_frame(pdu) (is_data_frame(pdu) && (!(pdu[0] & FC_QOS_BIT)))
#define is_qos_data_frame(pframe) \
- ((*(u16 *)pframe&(IEEE80211_STYPE_QOS_DATA|RTLLIB_FTYPE_DATA)) == \
- (IEEE80211_STYPE_QOS_DATA|RTLLIB_FTYPE_DATA))
-#define frame_order(pframe) (*(u16 *)pframe&IEEE80211_FCTL_ORDER)
-#define SN_LESS(a, b) (((a-b)&0x800) != 0)
+ ((*(u16 *)pframe & (IEEE80211_STYPE_QOS_DATA | RTLLIB_FTYPE_DATA)) == \
+ (IEEE80211_STYPE_QOS_DATA | RTLLIB_FTYPE_DATA))
+#define frame_order(pframe) (*(u16 *)pframe & IEEE80211_FCTL_ORDER)
+#define SN_LESS(a, b) (((a - b) & 0x800) != 0)
#define SN_EQUAL(a, b) (a == b)
#define MAX_DEV_ADDR_SIZE 8
@@ -414,13 +414,13 @@ enum _REG_PREAMBLE_MODE {
#define WLAN_GET_SEQ_FRAG(seq) ((seq) & RTLLIB_SCTL_FRAG)
#define WLAN_GET_SEQ_SEQ(seq) (((seq) & RTLLIB_SCTL_SEQ) >> 4)
-#define RTLLIB_STATMASK_SIGNAL (1<<0)
-#define RTLLIB_STATMASK_RSSI (1<<1)
-#define RTLLIB_STATMASK_NOISE (1<<2)
+#define RTLLIB_STATMASK_SIGNAL (1 << 0)
+#define RTLLIB_STATMASK_RSSI (1 << 1)
+#define RTLLIB_STATMASK_NOISE (1 << 2)
#define RTLLIB_STATMASK_WEMASK 0x7
-#define RTLLIB_CCK_MODULATION (1<<0)
-#define RTLLIB_OFDM_MODULATION (1<<1)
+#define RTLLIB_CCK_MODULATION (1 << 0)
+#define RTLLIB_OFDM_MODULATION (1 << 1)
#define RTLLIB_CCK_RATE_LEN 4
#define RTLLIB_CCK_RATE_1MB 0x02
@@ -507,11 +507,11 @@ struct rtllib_frag_entry {
struct rtllib_device;
-#define SEC_ACTIVE_KEY (1<<4)
-#define SEC_AUTH_MODE (1<<5)
-#define SEC_UNICAST_GROUP (1<<6)
-#define SEC_LEVEL (1<<7)
-#define SEC_ENABLED (1<<8)
+#define SEC_ACTIVE_KEY (1 << 4)
+#define SEC_AUTH_MODE (1 << 5)
+#define SEC_UNICAST_GROUP (1 << 6)
+#define SEC_LEVEL (1 << 7)
+#define SEC_ENABLED (1 << 8)
#define SEC_LEVEL_0 0 /* None */
#define SEC_LEVEL_1 1 /* WEP 40 and 104 bit */
@@ -696,17 +696,17 @@ union frameqos {
#define MAX_WPA_IE_LEN 64
#define MAX_WZC_IE_LEN 256
-#define NETWORK_EMPTY_ESSID (1<<0)
-#define NETWORK_HAS_OFDM (1<<1)
-#define NETWORK_HAS_CCK (1<<2)
+#define NETWORK_EMPTY_ESSID (1 << 0)
+#define NETWORK_HAS_OFDM (1 << 1)
+#define NETWORK_HAS_CCK (1 << 2)
/* QoS structure */
-#define NETWORK_HAS_QOS_PARAMETERS (1<<3)
-#define NETWORK_HAS_QOS_INFORMATION (1<<4)
+#define NETWORK_HAS_QOS_PARAMETERS (1 << 3)
+#define NETWORK_HAS_QOS_INFORMATION (1 << 4)
#define NETWORK_HAS_QOS_MASK (NETWORK_HAS_QOS_PARAMETERS | \
NETWORK_HAS_QOS_INFORMATION)
/* 802.11h */
-#define NETWORK_HAS_ERP_VALUE (1<<10)
+#define NETWORK_HAS_ERP_VALUE (1 << 10)
#define QOS_QUEUE_NUM 4
#define QOS_OUI_LEN 3
@@ -996,8 +996,8 @@ enum rtl_link_state {
#define DEFAULT_MAX_SCAN_AGE (15 * HZ)
#define DEFAULT_FTS 2346
-#define CFG_RTLLIB_RESERVE_FCS (1<<0)
-#define CFG_RTLLIB_COMPUTE_FCS (1<<1)
+#define CFG_RTLLIB_RESERVE_FCS (1 << 0)
+#define CFG_RTLLIB_COMPUTE_FCS (1 << 1)
struct tx_pending {
int frag;
@@ -1288,7 +1288,7 @@ struct rtllib_device {
u16 scan_watch_dog;
/* map of allowed channels. 0 is dummy */
- u8 active_channel_map[MAX_CHANNEL_NUMBER+1];
+ u8 active_channel_map[MAX_CHANNEL_NUMBER + 1];
int rate; /* current rate */
int basic_rate;
@@ -1486,32 +1486,32 @@ struct rtllib_device {
/* Uses the channel change callback directly
* instead of [start/stop] scan callbacks
*/
-#define IEEE_SOFTMAC_SCAN (1<<2)
+#define IEEE_SOFTMAC_SCAN (1 << 2)
/* Perform authentication and association handshake */
-#define IEEE_SOFTMAC_ASSOCIATE (1<<3)
+#define IEEE_SOFTMAC_ASSOCIATE (1 << 3)
/* Generate probe requests */
-#define IEEE_SOFTMAC_PROBERQ (1<<4)
+#define IEEE_SOFTMAC_PROBERQ (1 << 4)
/* Generate response to probe requests */
-#define IEEE_SOFTMAC_PROBERS (1<<5)
+#define IEEE_SOFTMAC_PROBERS (1 << 5)
/* The ieee802.11 stack will manage the netif queue
* wake/stop for the driver, taking care of 802.11
* fragmentation. See softmac.c for details.
*/
-#define IEEE_SOFTMAC_TX_QUEUE (1<<7)
+#define IEEE_SOFTMAC_TX_QUEUE (1 << 7)
/* Uses only the softmac_data_hard_start_xmit
* even for TX management frames.
*/
-#define IEEE_SOFTMAC_SINGLE_QUEUE (1<<8)
+#define IEEE_SOFTMAC_SINGLE_QUEUE (1 << 8)
/* Generate beacons. The stack will enqueue beacons
* to the card
*/
-#define IEEE_SOFTMAC_BEACONS (1<<6)
+#define IEEE_SOFTMAC_BEACONS (1 << 6)
static inline void *rtllib_priv(struct net_device *dev)
{
--
2.30.2
