Re: [PATCH v3 4/4] arm64: dts: rockchip: Add rkvdec2 Video Decoder on rk3588(s)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jonas,

On Thursday, June 20, 2024 11:00:49 A.M. EDT Jonas Karlman wrote:
> Hi Detlev,
> 
> On 2024-06-20 16:19, Detlev Casanova wrote:
> > Add the rkvdec2 Video Decoder to the RK3588s devicetree.
> > 
> > Signed-off-by: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
> > ---
> > 
> >  arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 48 +++++++++++++++++++++++
> >  1 file changed, 48 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
> > b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi index
> > 6ac5ac8b48ab..9c44c99125b4 100644
> > --- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
> > +++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
> > @@ -2596,6 +2596,16 @@ system_sram2: sram@ff001000 {
> > 
> >  		ranges = <0x0 0x0 0xff001000 0xef000>;
> >  		#address-cells = <1>;
> >  		#size-cells = <1>;
> > 
> > +
> > +		vdec0_sram: rkvdec-sram@0 {
> > +			reg = <0x0 0x78000>;
> > +			pool;
> > +		};
> > +
> > +		vdec1_sram: rkvdec-sram@1 {
> > +			reg = <0x78000 0x77000>;
> > +			pool;
> > +		};
> > 
> >  	};
> >  	
> >  	pinctrl: pinctrl {
> > 
> > @@ -2665,6 +2675,44 @@ gpio4: gpio@fec50000 {
> > 
> >  			#interrupt-cells = <2>;
> >  		
> >  		};
> >  	
> >  	};
> > 
> > +
> > +	vdec0: video-decoder@fdc38100 {
> 
> This and the vdec1 node should probably be added between
> 
>   pmu: power-management@fd8d8000
> 
> and
> 
>   av1d: video-codec@fdc70000
> 
> to follow reg order.
> 
> Also I am wondering if the nodes should be named
> 
>   video-codec@fdc38000
> 
> and
> 
>   video-codec@fdc40000
> 
> to match "1.1 Address Mapping" in TRM and the actual base address for
> the VDPU381 IP and video-codec is used for other codec nodes.
> 
> > +		compatible = "rockchip,rk3588-vdec";
> > +		reg = <0x0 0xfdc38100 0x0 0x500>;
> 
> For existing rkvdec1 devices the cache regs is also included in the
> range, should cache regs also be included for rkvdec2?, e.g.:
> 
>   reg = <0x0 0xfdc38100 0x0 0x600>;
> 
> And maybe it also should include the link list regs, e.g.:
> 
>   reg = <0x0 0xfdc38000 0x0 0x700>;
> 
> or possible:
> 
>   reg = <0x0 0xfdc38000 0x0 0x100>,
>         <0x0 0xfdc38100 0x0 0x500>,
>         <0x0 0xfdc38600 0x0 0x100>;
> 
> Something like that may be a better description of the hw.

Would it make sense to also add reg-names then ?
reg-names = "link", "function", "cache";

Detlev.

> > +		interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH 0>;
> > +		clocks = <&cru ACLK_RKVDEC0>, <&cru HCLK_RKVDEC0>, 
<&cru
> > CLK_RKVDEC0_CA>, +			 <&cru CLK_RKVDEC0_CORE>, <&cru
> > CLK_RKVDEC0_HEVC_CA>;
> > +		clock-names = "axi", "ahb", "cabac", "core", 
"hevc_cabac";
> > +		assigned-clocks = <&cru ACLK_RKVDEC0>, <&cru 
CLK_RKVDEC0_CORE>,
> > +				  <&cru CLK_RKVDEC0_CA>, <&cru 
CLK_RKVDEC0_HEVC_CA>;
> > +		assigned-clock-rates = <800000000>, <600000000>,
> > +				       <600000000>, <1000000000>;
> > +		resets = <&cru SRST_A_RKVDEC0>, <&cru SRST_H_RKVDEC0>, 
<&cru
> > SRST_RKVDEC0_CA>, +			 <&cru SRST_RKVDEC0_CORE>, <&cru
> > SRST_RKVDEC0_HEVC_CA>;
> > +		reset-names = "rst_axi", "rst_ahb", "rst_cabac",
> > +			      "rst_core", "rst_hevc_cabac";
> 
> Do we need to include the rst prefix in the reset name?, does not look
> like other DT/bindings normally include rst in their name.
> 
> > +		power-domains = <&power RK3588_PD_RKVDEC0>;
> > +		sram = <&vdec0_sram>;
> > +	};
> > +
> > +	vdec1: video-decoder@fdc40100 {
> 
> Same as above.
> 
> > +		compatible = "rockchip,rk3588-vdec";
> > +		reg = <0x0 0xfdc40100 0x0 0x500>;
> 
> Same as above.
> 
> Regards,
> Jonas
> 
> > +		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH 0>;
> > +		clocks = <&cru ACLK_RKVDEC1>, <&cru HCLK_RKVDEC1>, 
<&cru
> > CLK_RKVDEC1_CA>, +			 <&cru CLK_RKVDEC1_CORE>, <&cru
> > CLK_RKVDEC1_HEVC_CA>;
> > +		clock-names = "axi", "ahb", "cabac", "core", 
"hevc_cabac";
> > +		assigned-clocks = <&cru ACLK_RKVDEC1>, <&cru 
CLK_RKVDEC1_CORE>,
> > +				  <&cru CLK_RKVDEC1_CA>, <&cru 
CLK_RKVDEC1_HEVC_CA>;
> > +		assigned-clock-rates = <800000000>, <600000000>,
> > +				       <600000000>, <1000000000>;
> > +		resets = <&cru SRST_A_RKVDEC1>, <&cru SRST_H_RKVDEC1>, 
<&cru
> > SRST_RKVDEC1_CA>, +			 <&cru SRST_RKVDEC1_CORE>, <&cru
> > SRST_RKVDEC1_HEVC_CA>;
> > +		reset-names = "rst_axi", "rst_ahb", "rst_cabac",
> > +			      "rst_core", "rst_hevc_cabac";
> > +		power-domains = <&power RK3588_PD_RKVDEC1>;
> > +		sram = <&vdec1_sram>;
> > +	};
> > 
> >  };
> >  
> >  #include "rk3588s-pinctrl.dtsi"

Attachment: signature.asc
Description: This is a digitally signed message part.


[Index of Archives]     [Linux Driver Development]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux