Hi Niklas,
Thank you for the patch.
On Fri, May 10, 2024 at 05:56:06PM +0200, Niklas Söderlund wrote:
> Create and store the subdevice format in the subdevices active state.
> This change do not have a huge effect on the driver as it do not yet
> support changing the format.
>
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
> ---
> Hello,
>
> This change is mostly to align all driver used in the R-Car VIN pipeline
> to use the same set of API and to make it easier to extend them in
> tandem going forward.
>
> This should be seen as a compliment to Jacopo's larger work in "[PATCH
> v3 00/11] media: renesas: rcar-csi2: Use the subdev active state" which
> updates other drivers in the VIN pipeline to use the active state.
>
> * Changes since v1
> - Use the control handler lock as the active state lock.
> ---
> drivers/staging/media/max96712/max96712.c | 37 +++++++++++++++++------
> 1 file changed, 28 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/staging/media/max96712/max96712.c b/drivers/staging/media/max96712/max96712.c
> index c44145284aa1..3b302547aa4b 100644
> --- a/drivers/staging/media/max96712/max96712.c
> +++ b/drivers/staging/media/max96712/max96712.c
> @@ -242,21 +242,34 @@ static const struct v4l2_subdev_video_ops max96712_video_ops = {
> .s_stream = max96712_s_stream,
> };
>
> -static int max96712_get_pad_format(struct v4l2_subdev *sd,
> - struct v4l2_subdev_state *sd_state,
> - struct v4l2_subdev_format *format)
> +static int max96712_init_state(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state)
> {
> - format->format.width = 1920;
> - format->format.height = 1080;
> - format->format.code = MEDIA_BUS_FMT_RGB888_1X24;
> - format->format.field = V4L2_FIELD_NONE;
> + static const struct v4l2_mbus_framefmt default_fmt = {
> + .width = 1920,
> + .height = 1080,
> + .code = MEDIA_BUS_FMT_RGB888_1X24,
> + .colorspace = V4L2_COLORSPACE_SRGB,
> + .field = V4L2_FIELD_NONE,
> + .ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT,
> + .quantization = V4L2_QUANTIZATION_DEFAULT,
> + .xfer_func = V4L2_XFER_FUNC_DEFAULT,
> + };
> + struct v4l2_mbus_framefmt *fmt;
> +
> + fmt = v4l2_subdev_state_get_format(state, 0);
> + *fmt = default_fmt;
>
> return 0;
> }
>
> +static const struct v4l2_subdev_internal_ops max96712_internal_ops = {
> + .init_state = max96712_init_state,
> +};
> +
> static const struct v4l2_subdev_pad_ops max96712_pad_ops = {
> - .get_fmt = max96712_get_pad_format,
> - .set_fmt = max96712_get_pad_format,
> + .get_fmt = v4l2_subdev_get_fmt,
> + .set_fmt = v4l2_subdev_get_fmt,
> };
>
> static const struct v4l2_subdev_ops max96712_subdev_ops = {
> @@ -293,6 +306,7 @@ static int max96712_v4l2_register(struct max96712_priv *priv)
> long pixel_rate;
> int ret;
>
> + priv->sd.internal_ops = &max96712_internal_ops;
> v4l2_i2c_subdev_init(&priv->sd, priv->client, &max96712_subdev_ops);
> priv->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> priv->sd.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
> @@ -324,6 +338,11 @@ static int max96712_v4l2_register(struct max96712_priv *priv)
>
> v4l2_set_subdevdata(&priv->sd, priv);
>
> + priv->sd.state_lock = priv->ctrl_handler.lock;
> + ret = v4l2_subdev_init_finalize(&priv->sd);
> + if (ret)
> + goto error;
> +
> ret = v4l2_async_register_subdev(&priv->sd);
> if (ret < 0) {
> dev_err(&priv->client->dev, "Unable to register subdevice\n");
--
Regards,
Laurent Pinchart
