On Thu, Mar 21, 2024 at 09:04:32PM +0200, Laurent Pinchart wrote:
> Hi Umang,
>
> Thank you for the patch.
>
> On Thu, Mar 21, 2024 at 04:07:37PM +0530, Umang Jain wrote:
> > The cache-line-size is cached in struct vchiq_platform_info.
> > There is no need to cache this again via g_cache_line_size.
> > Instead use the value from vchiq_platform_info directly.
> >
> > Signed-off-by: Umang Jain <umang.jain@xxxxxxxxxxxxxxxx>
> > ---
> > .../interface/vchiq_arm/vchiq_arm.c | 49 +++++++++++--------
> > 1 file changed, 29 insertions(+), 20 deletions(-)
> >
> > diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
> > index 73405a1f50ee..01b4e4b010c6 100644
> > --- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
> > +++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
> > @@ -71,6 +71,17 @@ static struct vchiq_device *bcm2835_audio;
> > static struct vchiq_device *bcm2835_camera;
> >
> > static struct vchiq_platform_info bcm2835_info = {
> > + /*
> > + * This value is the size of the L2 cache lines as understood by the
> > + * VPU firmware, which determines the required alignment of the
> > + * offsets/sizes in pagelists.
>
> This belongs to a kerneldoc block for the vchiq_drvdata structure.
>
> > + *
> > + * Modern VPU firmware looks for a DT "cache-line-size" property in
> > + * the VCHIQ node and will overwrite it with the actual L2 cache size,
> > + * which the kernel must then respect. That property was rejected
> > + * upstream, so we have to use the VPU firmware's compatibility value
> > + * of 32.
>
> This should be moved to the same location too, but the comment is a bit
> outdated, as the driver uses 64 for bcm2836 and compatible. You could
> write
>
> * Modern VPU firmware looks for a DT "cache-line-size" property in the
> * VCHIQ node and will overwrite it with the actual L2 cache size, which
> * the kernel must then respect. That property was rejected upstream, so
> * we use a value derived from the compatible string.
>
> > + */
> > .cache_line_size = 32,
> > };
> >
> > @@ -130,17 +141,6 @@ struct vchiq_pagelist_info {
> > };
> >
> > static void __iomem *g_regs;
> > -/* This value is the size of the L2 cache lines as understood by the
> > - * VPU firmware, which determines the required alignment of the
> > - * offsets/sizes in pagelists.
> > - *
> > - * Modern VPU firmware looks for a DT "cache-line-size" property in
> > - * the VCHIQ node and will overwrite it with the actual L2 cache size,
> > - * which the kernel must then respect. That property was rejected
> > - * upstream, so we have to use the VPU firmware's compatibility value
> > - * of 32.
> > - */
> > -static unsigned int g_cache_line_size = 32;
> > static unsigned int g_fragments_size;
> > static char *g_fragments_base;
> > static char *g_free_fragments;
> > @@ -211,6 +211,8 @@ static struct vchiq_pagelist_info *
> > create_pagelist(struct vchiq_instance *instance, char *buf, char __user *ubuf,
> > size_t count, unsigned short type)
> > {
> > + struct platform_device *pdev;
> > + struct vchiq_drv_mgmt *drv_mgmt;
> > struct pagelist *pagelist;
> > struct vchiq_pagelist_info *pagelistinfo;
> > struct page **pages;
> > @@ -225,6 +227,9 @@ create_pagelist(struct vchiq_instance *instance, char *buf, char __user *ubuf,
> > if (count >= INT_MAX - PAGE_SIZE)
> > return NULL;
> >
> > + pdev = to_platform_device(instance->state->dev->parent);
> > + drv_mgmt = platform_get_drvdata(pdev);
>
> drv_mgmt = dev_get_drvdata(instance->state->dev->parent);
>
> Same below.
>
> On a related note, I think you should move the contents of
> vchiq_connected.c to vchiq_arm.c. It's a small file, containing two
> functions only, with one of them being called only from vchiq_arm.c. It
> would allow you to make the vchiq_drv_mgmt structure private to
> vchiq_arm.c. This can be done on top of this series.
In which case vchiq_call_connected_callbacks() would become a static
function, the vchiq_add_connected_callback() function declaration could
go to vchiq.h or vchiq_bus.h, and vchiq_connected.h should be dropped.
> Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
>
> > +
> > if (buf)
> > offset = (uintptr_t)buf & (PAGE_SIZE - 1);
> > else
> > @@ -367,9 +372,9 @@ create_pagelist(struct vchiq_instance *instance, char *buf, char __user *ubuf,
> >
> > /* Partial cache lines (fragments) require special measures */
> > if ((type == PAGELIST_READ) &&
> > - ((pagelist->offset & (g_cache_line_size - 1)) ||
> > + ((pagelist->offset & (drv_mgmt->pinfo->cache_line_size - 1)) ||
> > ((pagelist->offset + pagelist->length) &
> > - (g_cache_line_size - 1)))) {
> > + (drv_mgmt->pinfo->cache_line_size - 1)))) {
> > char *fragments;
> >
> > if (down_interruptible(&g_free_fragments_sema)) {
> > @@ -395,12 +400,17 @@ static void
> > free_pagelist(struct vchiq_instance *instance, struct vchiq_pagelist_info *pagelistinfo,
> > int actual)
> > {
> > + struct platform_device *pdev;
> > + struct vchiq_drv_mgmt *drv_mgmt;
> > struct pagelist *pagelist = pagelistinfo->pagelist;
> > struct page **pages = pagelistinfo->pages;
> > unsigned int num_pages = pagelistinfo->num_pages;
> >
> > dev_dbg(instance->state->dev, "arm: %pK, %d\n", pagelistinfo->pagelist, actual);
> >
> > + pdev = to_platform_device(instance->state->dev->parent);
> > + drv_mgmt = platform_get_drvdata(pdev);
> > +
> > /*
> > * NOTE: dma_unmap_sg must be called before the
> > * cpu can touch any of the data/pages.
> > @@ -416,10 +426,10 @@ free_pagelist(struct vchiq_instance *instance, struct vchiq_pagelist_info *pagel
> > g_fragments_size;
> > int head_bytes, tail_bytes;
> >
> > - head_bytes = (g_cache_line_size - pagelist->offset) &
> > - (g_cache_line_size - 1);
> > + head_bytes = (drv_mgmt->pinfo->cache_line_size - pagelist->offset) &
> > + (drv_mgmt->pinfo->cache_line_size - 1);
> > tail_bytes = (pagelist->offset + actual) &
> > - (g_cache_line_size - 1);
> > + (drv_mgmt->pinfo->cache_line_size - 1);
> >
> > if ((actual >= 0) && (head_bytes != 0)) {
> > if (head_bytes > actual)
> > @@ -434,8 +444,8 @@ free_pagelist(struct vchiq_instance *instance, struct vchiq_pagelist_info *pagel
> > (tail_bytes != 0))
> > memcpy_to_page(pages[num_pages - 1],
> > (pagelist->offset + actual) &
> > - (PAGE_SIZE - 1) & ~(g_cache_line_size - 1),
> > - fragments + g_cache_line_size,
> > + (PAGE_SIZE - 1) & ~(drv_mgmt->pinfo->cache_line_size - 1),
> > + fragments + drv_mgmt->pinfo->cache_line_size,
> > tail_bytes);
> >
> > down(&g_free_fragments_mutex);
> > @@ -478,8 +488,7 @@ static int vchiq_platform_init(struct platform_device *pdev, struct vchiq_state
> > if (err < 0)
> > return err;
> >
> > - g_cache_line_size = drv_mgmt->pinfo->cache_line_size;
> > - g_fragments_size = 2 * g_cache_line_size;
> > + g_fragments_size = 2 * drv_mgmt->pinfo->cache_line_size;
> >
> > /* Allocate space for the channels in coherent memory */
> > slot_mem_size = PAGE_ALIGN(TOTAL_SLOTS * VCHIQ_SLOT_SIZE);
--
Regards,
Laurent Pinchart
