[PATCH 2/5] media: atomisp: ov2680: Stop using half pixelclock for binned modes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Stop using half pixelclock for binned modes this fixes:
1. The exposure being twice as high for binned mods (due to the half clk)
2. The framerate being 15 fps instead of 30 fps

The original code with fixed per mode register lists did use half pixel
clk, but this should be combined with using half for the VTS value too.

Using half VTS fixes the framerate issue, but this has the undesired
side-effect of change the exposure ctrl range (half the range, double
the amount of exposure per step).

Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
 drivers/staging/media/atomisp/i2c/atomisp-ov2680.c | 8 +-------
 drivers/staging/media/atomisp/i2c/ov2680.h         | 1 +
 2 files changed, 2 insertions(+), 7 deletions(-)

diff --git a/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c b/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c
index 3ec0421b90a5..1db2eb9f9e25 100644
--- a/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c
+++ b/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c
@@ -244,27 +244,21 @@ static void ov2680_calc_mode(struct ov2680_dev *sensor)
 static int ov2680_set_mode(struct ov2680_dev *sensor)
 {
 	struct i2c_client *client = sensor->client;
-	u8 pll_div, unknown, inc, fmt1, fmt2;
+	u8 unknown, inc, fmt1, fmt2;
 	int ret;
 
 	if (sensor->mode.binning) {
-		pll_div = 1;
 		unknown = 0x23;
 		inc = 0x31;
 		fmt1 = 0xc2;
 		fmt2 = 0x01;
 	} else {
-		pll_div = 0;
 		unknown = 0x21;
 		inc = 0x11;
 		fmt1 = 0xc0;
 		fmt2 = 0x00;
 	}
 
-	ret = ov_write_reg8(client, 0x3086, pll_div);
-	if (ret)
-		return ret;
-
 	ret = ov_write_reg8(client, 0x370a, unknown);
 	if (ret)
 		return ret;
diff --git a/drivers/staging/media/atomisp/i2c/ov2680.h b/drivers/staging/media/atomisp/i2c/ov2680.h
index fd9c7485f8c1..b6c0ef591c69 100644
--- a/drivers/staging/media/atomisp/i2c/ov2680.h
+++ b/drivers/staging/media/atomisp/i2c/ov2680.h
@@ -181,6 +181,7 @@ static struct ov2680_reg const ov2680_global_setting[] = {
 	{0x3082, 0x45},
 	{0x3084, 0x09},
 	{0x3085, 0x04},
+	{0x3086, 0x00},
 	{0x3503, 0x03},
 	{0x350b, 0x36},
 	{0x3600, 0xb4},
-- 
2.40.1





[Index of Archives]     [Linux Driver Development]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux