s/ov2680_device/ov2680_dev/ ov2680_dev is used by the generic
drivers/media/i2c/ov2680.c driver. Bring the atomisp ov2680 code
inline to make it easier to port changes between the two,
with the end goal of getting rid of the atomisp specific version.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
.../media/atomisp/i2c/atomisp-ov2680.c | 38 +++++++++----------
drivers/staging/media/atomisp/i2c/ov2680.h | 8 ++--
2 files changed, 23 insertions(+), 23 deletions(-)
diff --git a/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c b/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c
index b35ddf611e2b..cd6557c9a4c9 100644
--- a/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c
+++ b/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c
@@ -45,7 +45,7 @@ static int ov2680_write_reg_array(struct i2c_client *client,
return 0;
}
-static void ov2680_set_bayer_order(struct ov2680_device *sensor, struct v4l2_mbus_framefmt *fmt)
+static void ov2680_set_bayer_order(struct ov2680_dev *sensor, struct v4l2_mbus_framefmt *fmt)
{
static const int ov2680_hv_flip_bayer_order[] = {
MEDIA_BUS_FMT_SBGGR10_1X10,
@@ -64,7 +64,7 @@ static void ov2680_set_bayer_order(struct ov2680_device *sensor, struct v4l2_mbu
fmt->code = ov2680_hv_flip_bayer_order[hv_flip];
}
-static int ov2680_set_vflip(struct ov2680_device *sensor, s32 val)
+static int ov2680_set_vflip(struct ov2680_dev *sensor, s32 val)
{
int ret;
@@ -79,7 +79,7 @@ static int ov2680_set_vflip(struct ov2680_device *sensor, s32 val)
return 0;
}
-static int ov2680_set_hflip(struct ov2680_device *sensor, s32 val)
+static int ov2680_set_hflip(struct ov2680_dev *sensor, s32 val)
{
int ret;
@@ -94,17 +94,17 @@ static int ov2680_set_hflip(struct ov2680_device *sensor, s32 val)
return 0;
}
-static int ov2680_exposure_set(struct ov2680_device *sensor, u32 exp)
+static int ov2680_exposure_set(struct ov2680_dev *sensor, u32 exp)
{
return ov_write_reg24(sensor->client, OV2680_REG_EXPOSURE_PK_HIGH, exp << 4);
}
-static int ov2680_gain_set(struct ov2680_device *sensor, u32 gain)
+static int ov2680_gain_set(struct ov2680_dev *sensor, u32 gain)
{
return ov_write_reg16(sensor->client, OV2680_REG_GAIN_PK, gain);
}
-static int ov2680_test_pattern_set(struct ov2680_device *sensor, int value)
+static int ov2680_test_pattern_set(struct ov2680_dev *sensor, int value)
{
int ret;
@@ -125,7 +125,7 @@ static int ov2680_test_pattern_set(struct ov2680_device *sensor, int value)
static int ov2680_s_ctrl(struct v4l2_ctrl *ctrl)
{
struct v4l2_subdev *sd = ctrl_to_sd(ctrl);
- struct ov2680_device *sensor = to_ov2680_sensor(sd);
+ struct ov2680_dev *sensor = to_ov2680_sensor(sd);
int ret;
/* Only apply changes to the controls if the device is powered up */
@@ -174,7 +174,7 @@ static int ov2680_init_registers(struct v4l2_subdev *sd)
}
static struct v4l2_mbus_framefmt *
-__ov2680_get_pad_format(struct ov2680_device *sensor,
+__ov2680_get_pad_format(struct ov2680_dev *sensor,
struct v4l2_subdev_state *state,
unsigned int pad, enum v4l2_subdev_format_whence which)
{
@@ -184,7 +184,7 @@ __ov2680_get_pad_format(struct ov2680_device *sensor,
return &sensor->mode.fmt;
}
-static void ov2680_fill_format(struct ov2680_device *sensor,
+static void ov2680_fill_format(struct ov2680_dev *sensor,
struct v4l2_mbus_framefmt *fmt,
unsigned int width, unsigned int height)
{
@@ -195,7 +195,7 @@ static void ov2680_fill_format(struct ov2680_device *sensor,
ov2680_set_bayer_order(sensor, fmt);
}
-static void ov2680_calc_mode(struct ov2680_device *sensor, int width, int height)
+static void ov2680_calc_mode(struct ov2680_dev *sensor, int width, int height)
{
int orig_width = width;
int orig_height = height;
@@ -221,7 +221,7 @@ static void ov2680_calc_mode(struct ov2680_device *sensor, int width, int height
sensor->mode.vts = OV2680_LINES_PER_FRAME;
}
-static int ov2680_set_mode(struct ov2680_device *sensor)
+static int ov2680_set_mode(struct ov2680_dev *sensor)
{
struct i2c_client *client = sensor->client;
u8 pll_div, unknown, inc, fmt1, fmt2;
@@ -322,7 +322,7 @@ static int ov2680_set_fmt(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_format *format)
{
- struct ov2680_device *sensor = to_ov2680_sensor(sd);
+ struct ov2680_dev *sensor = to_ov2680_sensor(sd);
struct v4l2_mbus_framefmt *fmt;
unsigned int width, height;
@@ -347,7 +347,7 @@ static int ov2680_get_fmt(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_format *format)
{
- struct ov2680_device *sensor = to_ov2680_sensor(sd);
+ struct ov2680_dev *sensor = to_ov2680_sensor(sd);
struct v4l2_mbus_framefmt *fmt;
fmt = __ov2680_get_pad_format(sensor, sd_state, format->pad, format->which);
@@ -390,7 +390,7 @@ static int ov2680_detect(struct i2c_client *client)
static int ov2680_s_stream(struct v4l2_subdev *sd, int enable)
{
- struct ov2680_device *sensor = to_ov2680_sensor(sd);
+ struct ov2680_dev *sensor = to_ov2680_sensor(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
int ret = 0;
@@ -548,7 +548,7 @@ static const struct v4l2_subdev_ops ov2680_ops = {
.sensor = &ov2680_sensor_ops,
};
-static int ov2680_init_controls(struct ov2680_device *sensor)
+static int ov2680_init_controls(struct ov2680_dev *sensor)
{
static const char * const test_pattern_menu[] = {
"Disabled",
@@ -590,7 +590,7 @@ static int ov2680_init_controls(struct ov2680_device *sensor)
static void ov2680_remove(struct i2c_client *client)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
- struct ov2680_device *sensor = to_ov2680_sensor(sd);
+ struct ov2680_dev *sensor = to_ov2680_sensor(sd);
dev_dbg(&client->dev, "ov2680_remove...\n");
@@ -605,7 +605,7 @@ static void ov2680_remove(struct i2c_client *client)
static int ov2680_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
- struct ov2680_device *sensor;
+ struct ov2680_dev *sensor;
int ret;
sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL);
@@ -673,7 +673,7 @@ static int ov2680_probe(struct i2c_client *client)
static int ov2680_suspend(struct device *dev)
{
struct v4l2_subdev *sd = dev_get_drvdata(dev);
- struct ov2680_device *sensor = to_ov2680_sensor(sd);
+ struct ov2680_dev *sensor = to_ov2680_sensor(sd);
gpiod_set_value_cansleep(sensor->powerdown, 1);
return 0;
@@ -682,7 +682,7 @@ static int ov2680_suspend(struct device *dev)
static int ov2680_resume(struct device *dev)
{
struct v4l2_subdev *sd = dev_get_drvdata(dev);
- struct ov2680_device *sensor = to_ov2680_sensor(sd);
+ struct ov2680_dev *sensor = to_ov2680_sensor(sd);
/* according to DS, at least 5ms is needed after DOVDD (enabled by ACPI) */
usleep_range(5000, 6000);
diff --git a/drivers/staging/media/atomisp/i2c/ov2680.h b/drivers/staging/media/atomisp/i2c/ov2680.h
index a3eeb0c2de5c..077ca6ee08b6 100644
--- a/drivers/staging/media/atomisp/i2c/ov2680.h
+++ b/drivers/staging/media/atomisp/i2c/ov2680.h
@@ -106,7 +106,7 @@
/*
* ov2680 device structure.
*/
-struct ov2680_device {
+struct ov2680_dev {
struct v4l2_subdev sd;
struct media_pad pad;
struct mutex input_lock;
@@ -151,12 +151,12 @@ struct ov2680_reg {
u32 val; /* @set value for read/mod/write, @mask */
};
-#define to_ov2680_sensor(x) container_of(x, struct ov2680_device, sd)
+#define to_ov2680_sensor(x) container_of(x, struct ov2680_dev, sd)
static inline struct v4l2_subdev *ctrl_to_sd(struct v4l2_ctrl *ctrl)
{
- struct ov2680_device *sensor =
- container_of(ctrl->handler, struct ov2680_device, ctrls.handler);
+ struct ov2680_dev *sensor =
+ container_of(ctrl->handler, struct ov2680_dev, ctrls.handler);
return &sensor->sd;
}
--
2.40.1
