Writing code in comments is generally not considered a good coding
practice.
Remove all the code comments from the file.
Signed-off-by: Khadija Kamran <kamrankhadijadj@xxxxxxxxx>
---
drivers/staging/rtl8192u/r8192U_dm.c | 127 +--------------------------
1 file changed, 2 insertions(+), 125 deletions(-)
diff --git a/drivers/staging/rtl8192u/r8192U_dm.c b/drivers/staging/rtl8192u/r8192U_dm.c
index 885c5966342f..f210ede8b1c7 100644
--- a/drivers/staging/rtl8192u/r8192U_dm.c
+++ b/drivers/staging/rtl8192u/r8192U_dm.c
@@ -50,11 +50,9 @@ static void dm_init_bandwidth_autoswitch(struct net_device *dev);
static void dm_bandwidth_autoswitch(struct net_device *dev);
/* DM --> TX power control */
-/*static void dm_initialize_txpower_tracking(struct net_device *dev);*/
static void dm_check_txpower_tracking(struct net_device *dev);
-/*static void dm_txpower_reset_recovery(struct net_device *dev);*/
/* DM --> Dynamic Init Gain by RSSI */
static void dm_dig_init(struct net_device *dev);
@@ -70,7 +68,6 @@ static void dm_init_ctstoself(struct net_device *dev);
/* DM --> EDCA turbo mode control */
static void dm_check_edca_turbo(struct net_device *dev);
-/*static void dm_gpio_change_rf(struct net_device *dev);*/
/* DM --> Check PBC */
static void dm_check_pbc_gpio(struct net_device *dev);
@@ -117,7 +114,6 @@ void init_hal_dm(struct net_device *dev)
/* Initial TX Power Control for near/far range , add by amy 2008/05/15, porting from windows code. */
dm_init_dynamic_txpower(dev);
init_rate_adaptive(dev);
- /*dm_initialize_txpower_tracking(dev);*/
dm_dig_init(dev);
dm_init_edca_turbo(dev);
dm_init_bandwidth_autoswitch(dev);
@@ -142,21 +138,6 @@ void dm_CheckRxAggregation(struct net_device *dev)
unsigned long curTxOkCnt = 0;
unsigned long curRxOkCnt = 0;
-/*
- * if (pHalData->bForcedUsbRxAggr) {
- * if (pHalData->ForcedUsbRxAggrInfo == 0) {
- * if (pHalData->bCurrentRxAggrEnable) {
- * Adapter->HalFunc.HalUsbRxAggrHandler(Adapter, FALSE);
- * }
- * } else {
- * if (!pHalData->bCurrentRxAggrEnable || (pHalData->ForcedUsbRxAggrInfo != pHalData->LastUsbRxAggrInfoSetting)) {
- * Adapter->HalFunc.HalUsbRxAggrHandler(Adapter, TRUE);
- * }
- * }
- * return;
- * }
- *
- */
curTxOkCnt = priv->stats.txbytesunicast - lastTxOkCnt;
curRxOkCnt = priv->stats.rxbytesunicast - lastRxOkCnt;
@@ -190,10 +171,6 @@ void dm_CheckRxAggregation(struct net_device *dev)
void hal_dm_watchdog(struct net_device *dev)
{
- /*struct r8192_priv *priv = ieee80211_priv(dev);*/
-
- /*static u8 previous_bssid[6] ={0};*/
-
/*Add by amy 2008/05/15 ,porting from windows code.*/
dm_check_rate_adaptive(dev);
dm_dynamic_txpower(dev);
@@ -297,7 +274,6 @@ static void dm_check_rate_adaptive(struct net_device *dev)
return;
if (priv->ieee80211->state == IEEE80211_LINKED) {
- /*RT_TRACE(COMP_RATE, "dm_CheckRateAdaptive(): \t");*/
/* Check whether Short GI is enabled */
bshort_gi_enabled = (pHTInfo->bCurTxBW40MHz && pHTInfo->bCurShortGI40MHz) ||
@@ -344,37 +320,27 @@ static void dm_check_rate_adaptive(struct net_device *dev)
(pra->low_rssi_thresh_for_ra40M):(pra->low_rssi_thresh_for_ra20M);
}
- /*DbgPrint("[DM] THresh H/L=%d/%d\n\r", RATR.HighRSSIThreshForRA, RATR.LowRSSIThreshForRA);*/
if (priv->undecorated_smoothed_pwdb >= (long)HighRSSIThreshForRA) {
- /*DbgPrint("[DM] RSSI=%d STA=HIGH\n\r", pHalData->UndecoratedSmoothedPWDB);*/
pra->ratr_state = DM_RATR_STA_HIGH;
targetRATR = pra->upper_rssi_threshold_ratr;
} else if (priv->undecorated_smoothed_pwdb >= (long)LowRSSIThreshForRA) {
- /*DbgPrint("[DM] RSSI=%d STA=Middle\n\r", pHalData->UndecoratedSmoothedPWDB);*/
pra->ratr_state = DM_RATR_STA_MIDDLE;
targetRATR = pra->middle_rssi_threshold_ratr;
} else {
- /*DbgPrint("[DM] RSSI=%d STA=LOW\n\r", pHalData->UndecoratedSmoothedPWDB);*/
pra->ratr_state = DM_RATR_STA_LOW;
targetRATR = pra->low_rssi_threshold_ratr;
}
/* cosa add for test */
if (pra->ping_rssi_enable) {
- /*pHalData->UndecoratedSmoothedPWDB = 19;*/
if (priv->undecorated_smoothed_pwdb < (long)(pra->ping_rssi_thresh_for_ra+5)) {
if ((priv->undecorated_smoothed_pwdb < (long)pra->ping_rssi_thresh_for_ra) ||
ping_rssi_state) {
- /*DbgPrint("TestRSSI = %d, set RATR to 0x%x\n", pHalData->UndecoratedSmoothedPWDB, pRA->TestRSSIRATR);*/
pra->ratr_state = DM_RATR_STA_LOW;
targetRATR = pra->ping_rssi_ratr;
ping_rssi_state = 1;
}
- /* else
- * DbgPrint("TestRSSI is between the range.\n");
- */
} else {
- /*DbgPrint("TestRSSI Recover to 0x%x\n", targetRATR);*/
ping_rssi_state = 0;
}
}
@@ -496,7 +462,6 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device *dev)
u32 Value;
u8 Pwr_Flag;
u16 Avg_TSSI_Meas, TSSI_13dBm, Avg_TSSI_Meas_from_driver = 0;
- /*RT_STATUS rtStatus = RT_STATUS_SUCCESS;*/
bool rtStatus = true;
u32 delta = 0;
@@ -518,7 +483,6 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device *dev)
if (rtStatus == RT_STATUS_FAILURE)
RT_TRACE(COMP_POWER_TRACKING, "Set configuration with tx cmd queue fail!\n");
usleep_range(1000, 2000);
- /*DbgPrint("hi, vivi, strange\n");*/
for (i = 0; i <= 30; i++) {
read_nic_byte(dev, 0x1ba, &Pwr_Flag);
@@ -564,7 +528,6 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device *dev)
TSSI_13dBm = priv->TSSI_13dBm;
RT_TRACE(COMP_POWER_TRACKING, "TSSI_13dBm = %d\n", TSSI_13dBm);
- /*if (abs(Avg_TSSI_Meas_from_driver - TSSI_13dBm) <= E_FOR_TX_POWER_TRACK)*/
/* For MacOS-compatible */
if (Avg_TSSI_Meas_from_driver > TSSI_13dBm)
delta = Avg_TSSI_Meas_from_driver - TSSI_13dBm;
@@ -669,7 +632,7 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device *dev)
}
}
priv->btxpower_trackingInit = true;
- /*pHalData->TXPowercount = 0;*/
+
return;
}
@@ -713,10 +676,6 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device *dev)
}
tmpCCK40Mindex = 0;
}
- /* DbgPrint("%ddb, tmpOFDMindex = %d, tmpCCK20Mindex = %d, tmpCCK40Mindex = %d",
- * ((u1Byte)tmpRegA - pHalData->ThermalMeter[0]),
- * tmpOFDMindex, tmpCCK20Mindex, tmpCCK40Mindex);
- */
if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) /* 40M */
tmpCCKindex = tmpCCK40Mindex;
else
@@ -736,7 +695,6 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device *dev)
}
if (CCKSwingNeedUpdate) {
- /*DbgPrint("Update CCK Swing, CCK_index = %d\n", pHalData->CCK_index);*/
dm_cck_txpower_adjust(dev, priv->bcck_in_ch14);
}
if (priv->OFDM_index != tmpOFDMindex) {
@@ -1307,7 +1265,6 @@ static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
static u8 TM_Trigger;
- /*DbgPrint("dm_CheckTXPowerTracking()\n");*/
if (!priv->btxpower_tracking)
return;
if (priv->txpower_count <= 2) {
@@ -1318,7 +1275,6 @@ static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev)
if (!TM_Trigger) {
/* Attention!! You have to write all 12bits of data to RF, or it may cause RF to crash
* actually write reg0x02 bit1=0, then bit1=1.
- * DbgPrint("Trigger ThermalMeter, write RF reg0x2 = 0x4d to 0x4f\n");
*/
rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4d);
rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4f);
@@ -1327,7 +1283,6 @@ static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev)
TM_Trigger = 1;
return;
}
- /*DbgPrint("Schedule TxPowerTrackingWorkItem\n");*/
queue_delayed_work(priv->priv_wq, &priv->txpower_tracking_wq, 0);
TM_Trigger = 0;
}
@@ -1335,7 +1290,6 @@ static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev)
static void dm_check_txpower_tracking(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
- /*static u32 tx_power_track_counter = 0;*/
#ifdef RTL8190P
dm_CheckTXPowerTracking_TSSI(dev);
@@ -1420,7 +1374,6 @@ static void dm_CCKTxPowerAdjust_ThermalMeter(struct net_device *dev, bool bInCH
RT_TRACE(COMP_POWER_TRACKING, "CCK not chnl 14, reg 0x%x = 0x%x\n",
rCCK0_DebugPort, TempVal);
} else {
- /*priv->CCKTxPowerAdjustCntNotCh14++; cosa add for debug.*/
/* Write 0xa22 0xa23 */
TempVal = CCKSwingTable_Ch14[priv->CCK_index][0] +
(CCKSwingTable_Ch14[priv->CCK_index][1]<<8);
@@ -1503,10 +1456,7 @@ void dm_restore_dynamic_mechanism_state(struct net_device *dev)
ratr_value = reg_ratr;
if (priv->rf_type == RF_1T2R) { /* 1T2R, Spatial Stream 2 should be disabled */
ratr_value &= ~(RATE_ALL_OFDM_2SS);
- /*DbgPrint("HW_VAR_TATR_0 from 0x%x ==> 0x%x\n", ((pu4Byte)(val))[0], ratr_value);*/
}
- /*DbgPrint("set HW_VAR_TATR_0 = 0x%x\n", ratr_value);*/
- /*cosa PlatformEFIOWrite4Byte(Adapter, RATR0, ((pu4Byte)(val))[0]);*/
write_nic_dword(dev, RATR0, ratr_value);
write_nic_byte(dev, UFWP, 1);
}
@@ -1528,7 +1478,6 @@ static void dm_bb_initialgain_restore(struct net_device *dev)
return;
/* Disable Initial Gain */
- /*PHY_SetBBReg(Adapter, UFWP, bMaskLWord, 0x800);*/
rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); /* Only clear byte 1 and rewrite. */
rtl8192_setBBreg(dev, rOFDM0_XAAGCCore1, bit_mask, (u32)priv->initgain_backup.xaagccore1);
rtl8192_setBBreg(dev, rOFDM0_XBAGCCore1, bit_mask, (u32)priv->initgain_backup.xbagccore1);
@@ -1543,7 +1492,6 @@ static void dm_bb_initialgain_restore(struct net_device *dev)
RT_TRACE(COMP_DIG, "dm_BBInitialGainRestore 0xc68 is %x\n", priv->initgain_backup.xdagccore1);
RT_TRACE(COMP_DIG, "dm_BBInitialGainRestore 0xa0a is %x\n", priv->initgain_backup.cca);
/* Enable Initial Gain */
- /*PHY_SetBBReg(Adapter, UFWP, bMaskLWord, 0x100);*/
rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1); /* Only clear byte 1 and rewrite. */
} /* dm_BBInitialGainRestore */
@@ -1556,7 +1504,6 @@ static void dm_bb_initialgain_backup(struct net_device *dev)
if (dm_digtable.dig_algorithm == DIG_ALGO_BY_RSSI)
return;
- /*PHY_SetBBReg(Adapter, UFWP, bMaskLWord, 0x800);*/
rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); /* Only clear byte 1 and rewrite. */
priv->initgain_backup.xaagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XAAGCCore1, bit_mask);
priv->initgain_backup.xbagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XBAGCCore1, bit_mask);
@@ -1638,7 +1585,6 @@ static void dm_ctrl_initgain_byrssi(struct net_device *dev)
dm_ctrl_initgain_byrssi_by_fwfalse_alarm(dev);
else if (dm_digtable.dig_algorithm == DIG_ALGO_BY_RSSI)
dm_ctrl_initgain_byrssi_by_driverrssi(dev);
- /* ; */
else
return;
}
@@ -1653,7 +1599,6 @@ static void dm_ctrl_initgain_byrssi_by_driverrssi(
if (!dm_digtable.dig_enable_flag)
return;
- /*DbgPrint("Dig by Sw Rssi\n");*/
if (dm_digtable.dig_algorithm_switch) /* if switched algorithm, we have to disable FW Dig. */
fw_dig = 0;
@@ -1670,12 +1615,7 @@ static void dm_ctrl_initgain_byrssi_by_driverrssi(
else
dm_digtable.cur_connect_state = DIG_DISCONNECT;
- /* DbgPrint("DM_DigTable.PreConnectState = %d, DM_DigTable.CurConnectState = %d\n",
- * DM_DigTable.PreConnectState, DM_DigTable.CurConnectState);
- */
-
dm_digtable.rssi_val = priv->undecorated_smoothed_pwdb;
- /*DbgPrint("DM_DigTable.Rssi_val = %d\n", DM_DigTable.Rssi_val);*/
dm_initial_gain(dev);
dm_pd_th(dev);
dm_cs_ratio(dev);
@@ -1711,12 +1651,7 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
(priv->undecorated_smoothed_pwdb < dm_digtable.rssi_high_thresh))
return;
- /* DbgPrint("Dig by Fw False Alarm\n");
- * if (DM_DigTable.Dig_State == DM_STA_DIG_OFF)
- * DbgPrint("DIG Check\n\r RSSI=%d LOW=%d HIGH=%d STATE=%d",
- * pHalData->UndecoratedSmoothedPWDB, DM_DigTable.RssiLowThresh,
- * DM_DigTable.RssiHighThresh, DM_DigTable.Dig_State);
- * 1. When RSSI decrease, We have to judge if it is smaller than a threshold
+ /* 1. When RSSI decrease, We have to judge if it is smaller than a threshold
* and then execute the step below.
*/
if (priv->undecorated_smoothed_pwdb <= dm_digtable.rssi_low_thresh) {
@@ -1748,12 +1683,6 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
* 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same.
*/
write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x00);
- /* else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
- * write_nic_byte(pAdapter, rOFDM0_RxDetector1, 0x40);
- * else if (pAdapter->HardwareType == HARDWARE_TYPE_RTL8192E)
- * else
- * PlatformEFIOWrite1Byte(pAdapter, rOFDM0_RxDetector1, 0x40);
- */
} else
write_nic_byte(dev, rOFDM0_RxDetector1, 0x42);
@@ -1761,7 +1690,6 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
write_nic_byte(dev, 0xa0a, 0x08);
/* 1.5 Higher EDCCA. */
- /*PlatformEFIOWrite4Byte(pAdapter, rOFDM0_ECCAThreshold, 0x325);*/
return;
}
@@ -1782,7 +1710,6 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
reset_cnt = priv->reset_count;
dm_digtable.dig_state = DM_STA_DIG_ON;
- /*DbgPrint("DIG ON\n\r");*/
/* 2.1 Set initial gain.
* 2008/02/26 MH SD3-Jerry suggest to prevent dirty environment.
@@ -1805,12 +1732,6 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
* 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same.
*/
write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x20);
- /* else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
- * write_nic_byte(dev, rOFDM0_RxDetector1, 0x42);
- * else if (pAdapter->HardwareType == HARDWARE_TYPE_RTL8192E)
- * else
- * PlatformEFIOWrite1Byte(pAdapter, rOFDM0_RxDetector1, 0x42);
- */
} else
write_nic_byte(dev, rOFDM0_RxDetector1, 0x44);
@@ -1820,7 +1741,6 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
/* 2.4 Lower EDCCA.
* 2008/01/11 MH 90/92 series are the same.
*/
- /*PlatformEFIOWrite4Byte(pAdapter, rOFDM0_ECCAThreshold, 0x346);*/
/* 2.5 DIG On. */
rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1); /* Only clear byte 1 and rewrite. */
@@ -1868,11 +1788,6 @@ static void dm_ctrl_initgain_byrssi_highpwr(
/* 3.1 Higher PD_TH for OFDM for high power state. */
if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) {
write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x10);
-
- /* else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
- * write_nic_byte(dev, rOFDM0_RxDetector1, 0x41);
- */
-
} else
write_nic_byte(dev, rOFDM0_RxDetector1, 0x43);
} else {
@@ -1886,10 +1801,6 @@ static void dm_ctrl_initgain_byrssi_highpwr(
/* 3.2 Recover PD_TH for OFDM for normal power region. */
if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) {
write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x20);
- /* else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
- * write_nic_byte(dev, rOFDM0_RxDetector1, 0x42);
- */
-
} else
write_nic_byte(dev, rOFDM0_RxDetector1, 0x44);
}
@@ -1931,7 +1842,6 @@ static void dm_initial_gain(
dm_digtable.cur_ig_value = priv->DefaultInitialGain[0];
dm_digtable.pre_ig_value = 0;
}
- /*DbgPrint("DM_DigTable.CurIGValue = 0x%x, DM_DigTable.PreIGValue = 0x%x\n", DM_DigTable.CurIGValue, DM_DigTable.PreIGValue);*/
/* if silent reset happened, we should rewrite the values back */
if (priv->reset_count != reset_cnt) {
@@ -1947,7 +1857,6 @@ static void dm_initial_gain(
if ((dm_digtable.pre_ig_value != dm_digtable.cur_ig_value)
|| !initialized || force_write) {
initial_gain = (u8)dm_digtable.cur_ig_value;
- /*DbgPrint("Write initial gain = 0x%x\n", initial_gain);*/
/* Set initial gain. */
write_nic_byte(dev, rOFDM0_XAAGCCore1, initial_gain);
write_nic_byte(dev, rOFDM0_XBAGCCore1, initial_gain);
@@ -1999,7 +1908,6 @@ static void dm_pd_th(
{
if ((dm_digtable.prepd_thstate != dm_digtable.curpd_thstate) ||
(initialized <= 3) || force_write) {
- /*DbgPrint("Write PD_TH state = %d\n", DM_DigTable.CurPD_THState);*/
if (dm_digtable.curpd_thstate == DIG_PD_AT_LOW_POWER) {
/* Lower PD_TH for OFDM. */
if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) {
@@ -2007,9 +1915,6 @@ static void dm_pd_th(
* 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same.
*/
write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x00);
- /* else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
- * write_nic_byte(dev, rOFDM0_RxDetector1, 0x40);
- */
} else
write_nic_byte(dev, rOFDM0_RxDetector1, 0x42);
} else if (dm_digtable.curpd_thstate == DIG_PD_AT_NORMAL_POWER) {
@@ -2019,18 +1924,12 @@ static void dm_pd_th(
* 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same.
*/
write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x20);
- /* else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
- * write_nic_byte(dev, rOFDM0_RxDetector1, 0x42);
- */
} else
write_nic_byte(dev, rOFDM0_RxDetector1, 0x44);
} else if (dm_digtable.curpd_thstate == DIG_PD_AT_HIGH_POWER) {
/* Higher PD_TH for OFDM for high power state. */
if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) {
write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x10);
- /* else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
- * write_nic_byte(dev, rOFDM0_RxDetector1, 0x41);
- */
} else
write_nic_byte(dev, rOFDM0_RxDetector1, 0x43);
}
@@ -2077,7 +1976,6 @@ static void dm_cs_ratio(
{
if ((dm_digtable.precs_ratio_state != dm_digtable.curcs_ratio_state) ||
!initialized || force_write) {
- /*DbgPrint("Write CS_ratio state = %d\n", DM_DigTable.CurCS_ratioState);*/
if (dm_digtable.curcs_ratio_state == DIG_CS_RATIO_LOWER) {
/* Lower CS ratio for CCK. */
write_nic_byte(dev, 0xa0a, 0x08);
@@ -2106,7 +2004,6 @@ static void dm_check_edca_turbo(
{
struct r8192_priv *priv = ieee80211_priv(dev);
PRT_HIGH_THROUGHPUT pHTInfo = priv->ieee80211->pHTInfo;
- /*PSTA_QOS pStaQos = pMgntInfo->pStaQos;*/
/* Keep past Tx/Rx packet count for RT-to-RT EDCA turbo. */
static unsigned long lastTxOkCnt;
@@ -2123,20 +2020,17 @@ static void dm_check_edca_turbo(
if (priv->ieee80211->pHTInfo->IOTAction & HT_IOT_ACT_DISABLE_EDCA_TURBO)
goto dm_CheckEdcaTurbo_EXIT;
- /*printk("========>%s():bis_any_nonbepkts is %d\n", __func__, priv->bis_any_nonbepkts);*/
/* Check the status for current condition. */
if (!priv->ieee80211->bis_any_nonbepkts) {
curTxOkCnt = priv->stats.txbytesunicast - lastTxOkCnt;
curRxOkCnt = priv->stats.rxbytesunicast - lastRxOkCnt;
/* For RT-AP, we needs to turn it on when Rx>Tx */
if (curRxOkCnt > 4*curTxOkCnt) {
- /*printk("%s():curRxOkCnt > 4*curTxOkCnt\n");*/
if (!priv->bis_cur_rdlstate || !priv->bcurrent_turbo_EDCA) {
write_nic_dword(dev, EDCAPARA_BE, edca_setting_DL[pHTInfo->IOTPeer]);
priv->bis_cur_rdlstate = true;
}
} else {
- /*printk("%s():curRxOkCnt < 4*curTxOkCnt\n");*/
if (priv->bis_cur_rdlstate || !priv->bcurrent_turbo_EDCA) {
write_nic_dword(dev, EDCAPARA_BE, edca_setting_UL[pHTInfo->IOTPeer]);
priv->bis_cur_rdlstate = false;
@@ -2236,7 +2130,6 @@ static void dm_ctstoself(struct net_device *dev)
curRxOkCnt = priv->stats.rxbytesunicast - lastRxOkCnt;
if (curRxOkCnt > 4*curTxOkCnt) { /* downlink, disable CTS to self */
pHTInfo->IOTAction &= ~HT_IOT_ACT_FORCED_CTS2SELF;
- /*DbgPrint("dm_CTSToSelf() ==> CTS to self disabled -- downlink\n");*/
} else { /* uplink */
pHTInfo->IOTAction |= HT_IOT_ACT_FORCED_CTS2SELF;
}
@@ -2295,7 +2188,6 @@ void dm_rf_pathcheck_workitemcallback(struct work_struct *work)
struct delayed_work *dwork = to_delayed_work(work);
struct r8192_priv *priv = container_of(dwork, struct r8192_priv, rfpath_check_wq);
struct net_device *dev = priv->ieee80211->dev;
- /*bool bactually_set = false;*/
u8 rfpath = 0, i;
/* 2008/01/30 MH After discussing with SD3 Jerry, 0xc04/0xd04 register will
@@ -2359,7 +2251,6 @@ static void dm_rxpath_sel_byrssi(struct net_device *dev)
if (priv->ieee80211->mode == WIRELESS_MODE_B) {
DM_RxPathSelTable.cck_method = CCK_RX_VERSION_2; /* pure B mode, fixed cck version2 */
- /*DbgPrint("Pure B mode, use cck rx version2\n");*/
}
/* decide max/sec/min rssi index */
@@ -2512,7 +2403,6 @@ static void dm_rxpath_sel_byrssi(struct net_device *dev)
if ((DM_RxPathSelTable.disabled_rf >> i) & 0x1) { /* disabled rf */
if (tmp_max_rssi >= DM_RxPathSelTable.rf_enable_rssi_th[i]) {
/* enable the BB Rx path */
- /*DbgPrint("RF-%d is enabled.\n", 0x1<<i);*/
rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0x1<<i, 0x1); /* 0xc04[3:0] */
rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0x1<<i, 0x1); /* 0xd04[3:0] */
DM_RxPathSelTable.rf_enable_rssi_th[i] = 100;
@@ -2734,7 +2624,6 @@ void dm_check_fsync(struct net_device *dev)
#define RegC38_NonFsync_Other_AP 1
#define RegC38_Fsync_AP_BCM 2
struct r8192_priv *priv = ieee80211_priv(dev);
- /*u32 framesyncC34;*/
static u8 reg_c38_State = RegC38_Default;
static u32 reset_cnt;
@@ -2809,14 +2698,12 @@ void dm_check_fsync(struct net_device *dev)
if (reg_c38_State) {
write_nic_byte(dev, rOFDM0_RxDetector3, priv->framesync);
reg_c38_State = RegC38_Default;
- /*DbgPrint("Fsync is idle, rssi>=40, write 0xc38 = 0x%x\n", pHalData->framesync);*/
}
}
} else {
if (reg_c38_State) {
write_nic_byte(dev, rOFDM0_RxDetector3, priv->framesync);
reg_c38_State = RegC38_Default;
- /*DbgPrint("Fsync is idle, not connected, write 0xc38 = 0x%x\n", pHalData->framesync);*/
}
}
}
@@ -2826,13 +2713,11 @@ void dm_check_fsync(struct net_device *dev)
write_nic_byte(dev, rOFDM0_RxDetector3, priv->framesync);
reg_c38_State = RegC38_Default;
reset_cnt = priv->reset_count;
- /*DbgPrint("reg_c38_State = 0 for silent reset.\n");*/
}
} else {
if (reg_c38_State) {
write_nic_byte(dev, rOFDM0_RxDetector3, priv->framesync);
reg_c38_State = RegC38_Default;
- /*DbgPrint("framesync no monitor, write 0xc38 = 0x%x\n", pHalData->framesync);*/
}
}
}
@@ -2875,7 +2760,6 @@ static void dm_dynamic_txpower(struct net_device *dev)
priv->bDynamicTxLowPower = false;
return;
}
- /*printk("priv->ieee80211->current_network.unknown_cap_exist is %d , priv->ieee80211->current_network.broadcom_cap_exist is %d\n", priv->ieee80211->current_network.unknown_cap_exist, priv->ieee80211->current_network.broadcom_cap_exist);*/
if ((priv->ieee80211->current_network.atheros_cap_exist) && (priv->ieee80211->mode == IEEE_G)) {
txhipower_threshold = TX_POWER_ATHEROAP_THRESH_HIGH;
txlowpower_threshold = TX_POWER_ATHEROAP_THRESH_LOW;
@@ -2884,7 +2768,6 @@ static void dm_dynamic_txpower(struct net_device *dev)
txlowpower_threshold = TX_POWER_NEAR_FIELD_THRESH_LOW;
}
- /*printk("=======>%s(): txhipower_threshold is %d, txlowpower_threshold is %d\n", __func__, txhipower_threshold, txlowpower_threshold);*/
RT_TRACE(COMP_TXAGC, "priv->undecorated_smoothed_pwdb = %ld\n", priv->undecorated_smoothed_pwdb);
if (priv->ieee80211->state == IEEE80211_LINKED) {
@@ -2903,7 +2786,6 @@ static void dm_dynamic_txpower(struct net_device *dev)
priv->bDynamicTxLowPower = false;
}
} else {
- /*pHalData->bTXPowerCtrlforNearFarRange = !pHalData->bTXPowerCtrlforNearFarRange;*/
priv->bDynamicTxHighPower = false;
priv->bDynamicTxLowPower = false;
}
@@ -2917,7 +2799,6 @@ static void dm_dynamic_txpower(struct net_device *dev)
#endif
rtl8192_phy_setTxPower(dev, priv->ieee80211->current_network.channel);
- /*pHalData->bStartTxCtrlByTPCNFR = FALSE; Clear th flag of Set TX Power from Sitesurvey*/
}
priv->bLastDTPFlag_High = priv->bDynamicTxHighPower;
priv->bLastDTPFlag_Low = priv->bDynamicTxLowPower;
@@ -2930,14 +2811,10 @@ static void dm_check_txrateandretrycount(struct net_device *dev)
struct r8192_priv *priv = ieee80211_priv(dev);
struct ieee80211_device *ieee = priv->ieee80211;
/* for 11n tx rate */
- /*priv->stats.CurrentShowTxate = read_nic_byte(dev, CURRENT_TX_RATE_REG);*/
read_nic_byte(dev, CURRENT_TX_RATE_REG, &ieee->softmac_stats.CurrentShowTxate);
- /*printk("=============>tx_rate_reg:%x\n", ieee->softmac_stats.CurrentShowTxate);*/
/* for initial tx rate */
- /*priv->stats.last_packet_rate = read_nic_byte(dev, INITIAL_TX_RATE_REG);*/
read_nic_byte(dev, INITIAL_TX_RATE_REG, &ieee->softmac_stats.last_packet_rate);
/* for tx retry count */
- /*priv->stats.txretrycount = read_nic_dword(dev, TX_RETRY_COUNT_REG);*/
read_nic_dword(dev, TX_RETRY_COUNT_REG, &ieee->softmac_stats.txretrycount);
}
--
2.34.1
