The function rtl8192_SetRFPowerState() is not used anywhere, remove it.
Signed-off-by: Michael Straube <straube.linux@xxxxxxxxx>
---
drivers/staging/rtl8192u/r819xU_phy.c | 87 ---------------------------
drivers/staging/rtl8192u/r819xU_phy.h | 2 -
2 files changed, 89 deletions(-)
diff --git a/drivers/staging/rtl8192u/r819xU_phy.c b/drivers/staging/rtl8192u/r819xU_phy.c
index 97f4d89500ae..e6836eacc7aa 100644
--- a/drivers/staging/rtl8192u/r819xU_phy.c
+++ b/drivers/staging/rtl8192u/r819xU_phy.c
@@ -1044,93 +1044,6 @@ static void rtl8192_SetTxPowerLevel(struct net_device *dev, u8 channel)
}
}
-/******************************************************************************
- * function: This function sets RF state on or off
- * input: net_device *dev
- * RT_RF_POWER_STATE eRFPowerState //Power State to set
- * output: none
- * return: none
- * notice:
- *****************************************************************************/
-bool rtl8192_SetRFPowerState(struct net_device *dev,
- RT_RF_POWER_STATE eRFPowerState)
-{
- bool bResult = true;
- struct r8192_priv *priv = ieee80211_priv(dev);
-
- if (eRFPowerState == priv->ieee80211->eRFPowerState)
- return false;
-
- if (priv->SetRFPowerStateInProgress)
- return false;
-
- priv->SetRFPowerStateInProgress = true;
-
- switch (priv->rf_chip) {
- case RF_8256:
- switch (eRFPowerState) {
- case eRfOn:
- /* RF-A, RF-B */
- /* enable RF-Chip A/B - 0x860[4] */
- rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT(4),
- 0x1);
- /* analog to digital on - 0x88c[9:8] */
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0x300,
- 0x3);
- /* digital to analog on - 0x880[4:3] */
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x18,
- 0x3);
- /* rx antenna on - 0xc04[1:0] */
- rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0x3, 0x3);
- /* rx antenna on - 0xd04[1:0] */
- rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0x3, 0x3);
- /* analog to digital part2 on - 0x880[6:5] */
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x60,
- 0x3);
-
- break;
-
- case eRfSleep:
-
- break;
-
- case eRfOff:
- /* RF-A, RF-B */
- /* disable RF-Chip A/B - 0x860[4] */
- rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT(4),
- 0x0);
- /* analog to digital off, for power save */
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0xf00,
- 0x0); /* 0x88c[11:8] */
- /* digital to analog off, for power save - 0x880[4:3] */
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x18,
- 0x0);
- /* rx antenna off - 0xc04[3:0] */
- rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0xf, 0x0);
- /* rx antenna off - 0xd04[3:0] */
- rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0xf, 0x0);
- /* analog to digital part2 off, for power save */
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x60,
- 0x0); /* 0x880[6:5] */
-
- break;
-
- default:
- bResult = false;
- RT_TRACE(COMP_ERR, "%s(): unknown state to set: 0x%X\n",
- __func__, eRFPowerState);
- break;
- }
- break;
- default:
- RT_TRACE(COMP_ERR, "Not support rf_chip(%x)\n", priv->rf_chip);
- break;
- }
- priv->SetRFPowerStateInProgress = false;
-
- return bResult;
-}
-
/******************************************************************************
* function: This function sets command table variable (struct sw_chnl_cmd).
* input: sw_chnl_cmd *CmdTable //table to be set
diff --git a/drivers/staging/rtl8192u/r819xU_phy.h b/drivers/staging/rtl8192u/r819xU_phy.h
index 8c2933264407..bafaa6a90c50 100644
--- a/drivers/staging/rtl8192u/r819xU_phy.h
+++ b/drivers/staging/rtl8192u/r819xU_phy.h
@@ -74,8 +74,6 @@ void rtl8192_SetBWMode(struct net_device *dev,
enum ht_extension_chan_offset offset);
void rtl8192_SwChnl_WorkItem(struct net_device *dev);
void rtl8192_SetBWModeWorkItem(struct net_device *dev);
-bool rtl8192_SetRFPowerState(struct net_device *dev,
- RT_RF_POWER_STATE eRFPowerState);
void InitialGain819xUsb(struct net_device *dev, u8 Operation);
void InitialGainOperateWorkItemCallBack(struct work_struct *work);
--
2.39.2
