Re: [PATCH 28/57] media: Add ovxxxx_16bit_addr_reg_helpers.h

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Hans,

On Thu, Feb 09, 2023 at 04:03:22PM +0100, Hans de Goede wrote:
> On 2/8/23 10:52, Laurent Pinchart wrote:
> > On Mon, Jan 23, 2023 at 01:51:36PM +0100, Hans de Goede wrote:
> >> The following drivers under drivers/media/i2c: ov08x40.c, ov13858.c,
> >> ov13b10.c, ov2680.c, ov2685.c, ov2740.c, ov4689.c, ov5670.c,
> >> ov5675.c, ov5695.c, ov8856.c, ov9282.c and ov9734.c,
> >>
> >> as well as various "atomisp" sensor drivers in drivers/staging, *all*
> >> use register access helpers with the following function prototypes:
> >>
> >> int ovxxxx_read_reg(struct ovxxxx_dev *sensor, u16 reg,
> >>                     unsigned int len, u32 *val);
> >>
> >> int ovxxxx_write_reg(struct ovxxxx_dev *sensor, u16 reg,
> >>                      unsigned int len, u32 val);
> >>
> >> To read/write registers on Omnivision OVxxxx image sensors wich expect
> >> a 16 bit register address in big-endian format and which have 1-3 byte
> >> wide registers, in big-endian format (for the higher width registers).
> >>
> >> Add a new ovxxxx_16bit_addr_reg_helpers.h header file with static inline
> >> versions of these register access helpers, so that this code duplication
> >> can be removed.
> > 
> > Any reason to hand-roll those instead of using regmap ?
> 
> These devices have a mix of 8 + 16 + 24 bit registers which regmap
> appears to not handle, a regmap has a single regmap_config struct
> with a single "@reg_bits: Number of bits in a register address, mandatory",
> so we would still need wrappers around regmap, at which point it
> really offers us very little.

We could extend regmap too, although that may be too much yak shaving.
It would be nice, but I won't push hard for it.

> Also I'm moving duplicate code present in many of the
> drivers/media/i2c/ov*.c files into a common header to remove
> duplicate code. The handrolling was already there before :)
> 
> My goal with the new ovxxxx_16bit_addr_reg_helpers.h file was to
> offer something which is as much of a drop-in replacement of the
> current handrolled code as possible (usable with just a few
> search-n-replaces) as possible.
> 
> Basically my idea here was to factor out code which I noticed was
> being repeated over and over again. My goal was not to completely
> redo how register accesses are done in these drivers.
> 
> I realize I have not yet converted any other drivers, that is because
> I don't really have a way to test most of the other drivers. OTOH
> with the current helpers most conversions should be fairly simply
> and remove a nice amount of code. So maybe I should just only compile
> test the conversions ?

Before you spend time converting drivers, I'd like to complete the
discussion regarding the design of those helpers. I'd rather avoid
mass-patching drivers now and doing it again in the next kernel release.

Sakari mentioned CCI (part of the CSI-2 specification). I think that
would be a good name to replace ov* here, as none of this is specific to
OmniVision.

> > Also, may I
> > suggest to have a look at drivers/media/i2c/imx290.c for an example of
> > how registers of different sizes can be handled in a less error-prone
> > way, using single read/write functions that adapt to the size
> > automatically ?
> 
> Yes I have seen this pattern in drivers/media/i2c/ov5693.c too
> (at least I assume it is the same pattern you are talking about).

Correct. Can we use something like that to merge all the ov*_write_reg()
variants into a single function ? Having to select the size manually in
each call (either by picking the function variant, or by passing a size
as a function parameter) is error-prone. Encoding the size in the
register macro is much safer, easing both development and review.

> >> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> >> ---
> >>  include/media/ovxxxx_16bit_addr_reg_helpers.h | 93 +++++++++++++++++++
> >>  1 file changed, 93 insertions(+)
> >>  create mode 100644 include/media/ovxxxx_16bit_addr_reg_helpers.h
> >>
> >> diff --git a/include/media/ovxxxx_16bit_addr_reg_helpers.h b/include/media/ovxxxx_16bit_addr_reg_helpers.h
> >> new file mode 100644
> >> index 000000000000..e2ffee3d797a
> >> --- /dev/null
> >> +++ b/include/media/ovxxxx_16bit_addr_reg_helpers.h
> >> @@ -0,0 +1,93 @@
> >> +/* SPDX-License-Identifier: GPL-2.0 */
> >> +/*
> >> + * I2C register access helpers for Omnivision OVxxxx image sensors which expect
> >> + * a 16 bit register address in big-endian format and which have 1-3 byte
> >> + * wide registers, in big-endian format (for the higher width registers).
> >> + *
> >> + * Based on the register helpers from drivers/media/i2c/ov2680.c which is:
> >> + * Copyright (C) 2018 Linaro Ltd
> >> + */
> >> +#ifndef __OVXXXX_16BIT_ADDR_REG_HELPERS_H
> >> +#define __OVXXXX_16BIT_ADDR_REG_HELPERS_H
> >> +
> >> +#include <asm/unaligned.h>
> >> +#include <linux/dev_printk.h>
> >> +#include <linux/i2c.h>
> >> +
> >> +static inline int ovxxxx_read_reg(struct i2c_client *client, u16 reg,
> >> +				  unsigned int len, u32 *val)
> >> +{
> >> +	struct i2c_msg msgs[2];
> >> +	u8 addr_buf[2] = { reg >> 8, reg & 0xff };
> >> +	u8 data_buf[4] = { 0, };
> >> +	int ret;
> >> +
> >> +	if (len > 4)
> >> +		return -EINVAL;
> >> +
> >> +	msgs[0].addr = client->addr;
> >> +	msgs[0].flags = 0;
> >> +	msgs[0].len = ARRAY_SIZE(addr_buf);
> >> +	msgs[0].buf = addr_buf;
> >> +
> >> +	msgs[1].addr = client->addr;
> >> +	msgs[1].flags = I2C_M_RD;
> >> +	msgs[1].len = len;
> >> +	msgs[1].buf = &data_buf[4 - len];
> >> +
> >> +	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
> >> +	if (ret != ARRAY_SIZE(msgs)) {
> >> +		dev_err(&client->dev, "read error: reg=0x%4x: %d\n", reg, ret);
> >> +		return -EIO;
> >> +	}
> >> +
> >> +	*val = get_unaligned_be32(data_buf);
> >> +
> >> +	return 0;
> >> +}
> >> +
> >> +#define ovxxxx_read_reg8(s, r, v)	ovxxxx_read_reg(s, r, 1, v)
> >> +#define ovxxxx_read_reg16(s, r, v)	ovxxxx_read_reg(s, r, 2, v)
> >> +#define ovxxxx_read_reg24(s, r, v)	ovxxxx_read_reg(s, r, 3, v)
> >> +
> >> +static inline int ovxxxx_write_reg(struct i2c_client *client, u16 reg,
> >> +				   unsigned int len, u32 val)
> >> +{
> >> +	u8 buf[6];
> >> +	int ret;
> >> +
> >> +	if (len > 4)
> >> +		return -EINVAL;
> >> +
> >> +	put_unaligned_be16(reg, buf);
> >> +	put_unaligned_be32(val << (8 * (4 - len)), buf + 2);
> >> +	ret = i2c_master_send(client, buf, len + 2);
> >> +	if (ret != len + 2) {
> >> +		dev_err(&client->dev, "write error: reg=0x%4x: %d\n", reg, ret);
> >> +		return -EIO;
> >> +	}
> >> +
> >> +	return 0;
> >> +}
> >> +
> >> +#define ovxxxx_write_reg8(s, r, v)	ovxxxx_write_reg(s, r, 1, v)
> >> +#define ovxxxx_write_reg16(s, r, v)	ovxxxx_write_reg(s, r, 2, v)
> >> +#define ovxxxx_write_reg24(s, r, v)	ovxxxx_write_reg(s, r, 3, v)
> >> +
> >> +static inline int ovxxxx_mod_reg(struct i2c_client *client, u16 reg, u8 mask, u8 val)
> >> +{
> >> +	u32 readval;
> >> +	int ret;
> >> +
> >> +	ret = ovxxxx_read_reg8(client, reg, &readval);
> >> +	if (ret < 0)
> >> +		return ret;
> >> +
> >> +	readval &= ~mask;
> >> +	val &= mask;
> >> +	val |= readval;
> >> +
> >> +	return ovxxxx_write_reg8(client, reg, val);
> >> +}
> >> +
> >> +#endif

-- 
Regards,

Laurent Pinchart




[Index of Archives]     [Linux Driver Development]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux