Hi Mauro,
Here are all my atomisp changes for 6.3 + a couple of atomisp patches
from others.
These patches have been posted on the list and I have addressed
all review remarks to these patches.
Highlights:
-Move atomisp.ko power-magagement to its own pm-domain to silence all
the PCI subsystem suspend/resume error messages
-Make the driver less chatty / silence debug + false-positive errors output
-Whole bunch of other bugfixes
-ov2680 sensor driver:
-Significant rework / modernization
-Move to runtime-pm
-Drop custom atomisp_gmin_platform regulator/clk poking code,
replacing it with using ACPI to do the pm for us!
-Initial set of patches to make the ov2722 driver work
Regards,
Hans
The following changes since commit 7120d6bfd6d0b26b49958f429701996f2d3e2c2a:
media: tm6000: remove deprecated driver (2023-01-22 09:57:19 +0100)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/hansg/linux.git tags/media-atomisp-6.3-1
for you to fetch changes up to c69d6df6993e2b4ad66acf7a85dbf8c7f5734c3c:
media: atomisp: pci: sh_css: Inline single invocation of macro STATS_ENABLED() (2023-01-30 10:19:31 +0100)
----------------------------------------------------------------
Highlights:
-Move atomisp.ko power-magagement to its own pm-domain to silence all
the PCI subsystem suspend/resume error messages
-Make the driver less chatty / silence debug + false-positive errors output
-Whole bunch of other bugfixes
-ov2680 sensor driver:
-Significant rework / modernization
-Move to runtime-pm
-Drop custom atomisp_gmin_platform regulator/clk poking code,
replacing it with using ACPI to do the pm for us
-Initial set of patches to make the ov2722 driver work
----------------------------------------------------------------
Arnd Bergmann (1):
media: atomisp: fix videobuf2 Kconfig depenendency
Brent Pappas (3):
media: atomisp: pci: Replace bytes macros with functions
media: atomisp: pci: hive_isp_css_common: host: vmem: Replace SUBWORD macros with functions
media: atomisp: pci: sh_css: Inline single invocation of macro STATS_ENABLED()
Hans Verkuil (1):
media: atomisp: use vb2_start_streaming_called()
Hans de Goede (55):
media: atomisp: Propagate set_fmt() errors in queue_setup()
media: atomisp: Only set default_run_mode on first open of a stream/asd
media: atomisp: Fix WARN() when the vb2 start_streaming callback fails
media: atomisp: Check buffer index is in range inside atomisp_qbuf_wrapper()
media: atomisp: Fix regulator registers on BYT devices with CRC PMIC
media: atomisp: Remove atomisp_sw_contex struct
media: atomisp: Move power-management over to a custom pm-domain
media: atomisp: Silence "isys dma store at addr, val" debug messages
media: atomisp: Remove non working doorbell check from punit_ddr_dvfs_enable()
media: atomisp: Remove useless msleep(10) before power-on on BYT
media: atomisp: Remove custom ATOMISP_IOC_ISP_MAKERNOTE ioctl
media: atomisp: Remove custom ATOMISP_IOC_G_SENSOR_MODE_DATA ioctl
media: atomisp: Remove V4L2_CID_BIN_FACTOR_HORZ/_VERT
media: atomisp: Remove no longer used binning info from sensor resolution info
media: atomisp: Remove deferred firmware loading support
media: atomisp: Drop atomisp_init_pipe()
media: atomisp: Remove unnecessary memset(foo, 0, sizeof(foo)) calls
media: atomisp: Do not turn off sensor when the atomisp-sub-dev does not own it
media: atomisp: Allow sensor drivers without a s_power callback
media: atomisp: Remove atomisp_gmin_find_subdev()
media: atomisp: Add atomisp_register_sensor_no_gmin() helper
media: atomisp: Drop ffmt local var from atomisp_set_fmt()
media: atomisp: Stop overriding padding w/h to 12 on BYT
media: atomisp: Put sensor ACPI devices in D3 before disable ACPI power-resources
media: atomisp: Remove isp_subdev_link_setup()
media: atomisp: Remove csi2_link_setup()
media: atomisp: Properly initialize function field of media-entity links
media: Add ov_16bit_addr_reg_helpers.h
media: atomisp: ov2680: Use the new ov_16bit_addr_reg_helpers.h
media: atomisp: ov2680: Rework flip ctrls
media: atomisp: ov2680: Drop custom ATOMISP_IOC_S_EXPOSURE support
media: atomisp: ov2680: Add exposure and gain controls
media: atomisp: ov2680: Add test pattern control
media: atomisp: ov2680: Fix window settings and enable window for all resolutions
media: atomisp: ov2680: Make setting the modes algorithm based
media: atomisp: ov2680: Use defines for fps, lines-per-frame and skip-frames
media: atomisp: ov2680: Drop unused res member from struct ov2680_device
media: atomisp: ov2680: Fix ov2680_enum_frame_interval()
media: atomisp: ov2680: Drop v4l2_find_nearest_size() call from set_fmt()
media: atomisp: ov2680: Drop struct ov2680_resolution / ov2680_res_preview
media: atomisp: ov2680: Fix frame_size list
media: atomisp: ov2680: Remove unused data-types and defines from ov2680.h
media: atomisp: ov2680: Drop MAX_FMTS define
media: atomisp: ov2680: Consistently indent define values
media: atomisp: ov2680: Cleanup includes
media: atomisp: ov2680: Delay power-on till streaming is started
media: atomisp: ov2680: Add runtime-pm support
media: atomisp: ov2680: s/dev/sensor/
media: atomisp: ov2680: Add dev local variable to probe()
media: atomisp: ov2680: Use devm_kzalloc() for sensor data struct
media: atomisp: ov2680: Switch over to ACPI powermanagement
media: atomisp: ov2722: Call atomisp_gmin_remove_subdev() on probe failure
media: atomisp: ov2722: Fix GPIO1 polarity
media: atomisp: ov2722: Don't take the input_lock for try_fmt calls.
media: atomisp: ov2722: Power on sensor from set_fmt() callback
drivers/staging/media/atomisp/Kconfig | 2 +-
drivers/staging/media/atomisp/i2c/atomisp-gc0310.c | 249 ----
drivers/staging/media/atomisp/i2c/atomisp-gc2235.c | 176 ---
.../staging/media/atomisp/i2c/atomisp-mt9m114.c | 206 ----
drivers/staging/media/atomisp/i2c/atomisp-ov2680.c | 1280 ++++++--------------
drivers/staging/media/atomisp/i2c/atomisp-ov2722.c | 195 +--
drivers/staging/media/atomisp/i2c/gc0310.h | 10 -
drivers/staging/media/atomisp/i2c/gc2235.h | 31 -
drivers/staging/media/atomisp/i2c/mt9m114.h | 15 -
drivers/staging/media/atomisp/i2c/ov2680.h | 836 ++-----------
drivers/staging/media/atomisp/i2c/ov2722.h | 36 +-
.../media/atomisp/i2c/ov5693/atomisp-ov5693.c | 195 ---
drivers/staging/media/atomisp/i2c/ov5693/ov5693.h | 61 -
.../staging/media/atomisp/include/linux/atomisp.h | 50 -
.../atomisp/include/linux/atomisp_gmin_platform.h | 2 -
.../media/atomisp/include/linux/atomisp_platform.h | 11 +-
drivers/staging/media/atomisp/notes.txt | 6 -
drivers/staging/media/atomisp/pci/atomisp_cmd.c | 90 +-
drivers/staging/media/atomisp/pci/atomisp_cmd.h | 9 +-
drivers/staging/media/atomisp/pci/atomisp_csi2.c | 41 +-
drivers/staging/media/atomisp/pci/atomisp_csi2.h | 5 -
drivers/staging/media/atomisp/pci/atomisp_fops.c | 89 +-
drivers/staging/media/atomisp/pci/atomisp_fops.h | 3 +-
.../media/atomisp/pci/atomisp_gmin_platform.c | 120 +-
.../staging/media/atomisp/pci/atomisp_internal.h | 7 +-
drivers/staging/media/atomisp/pci/atomisp_ioctl.c | 60 +-
drivers/staging/media/atomisp/pci/atomisp_subdev.c | 171 +--
drivers/staging/media/atomisp/pci/atomisp_subdev.h | 13 -
drivers/staging/media/atomisp/pci/atomisp_tpg.c | 2 +-
drivers/staging/media/atomisp/pci/atomisp_v4l2.c | 165 +--
.../pci/css_2401_system/host/isys_dma_private.h | 2 -
.../atomisp/pci/hive_isp_css_common/host/vmem.c | 20 +-
drivers/staging/media/atomisp/pci/sh_css.c | 7 +-
drivers/staging/media/atomisp/pci/sh_css_params.c | 38 +-
include/media/ov_16bit_addr_reg_helpers.h | 92 ++
35 files changed, 871 insertions(+), 3424 deletions(-)
create mode 100644 include/media/ov_16bit_addr_reg_helpers.h
