On Mon, Jan 23, 2023 at 01:51:36PM +0100, Hans de Goede wrote:
> The following drivers under drivers/media/i2c: ov08x40.c, ov13858.c,
> ov13b10.c, ov2680.c, ov2685.c, ov2740.c, ov4689.c, ov5670.c,
> ov5675.c, ov5695.c, ov8856.c, ov9282.c and ov9734.c,
>
> as well as various "atomisp" sensor drivers in drivers/staging, *all*
> use register access helpers with the following function prototypes:
>
> int ovxxxx_read_reg(struct ovxxxx_dev *sensor, u16 reg,
> unsigned int len, u32 *val);
>
> int ovxxxx_write_reg(struct ovxxxx_dev *sensor, u16 reg,
> unsigned int len, u32 val);
>
> To read/write registers on Omnivision OVxxxx image sensors wich expect
> a 16 bit register address in big-endian format and which have 1-3 byte
> wide registers, in big-endian format (for the higher width registers).
>
> Add a new ovxxxx_16bit_addr_reg_helpers.h header file with static inline
> versions of these register access helpers, so that this code duplication
> can be removed.
...
> +#include <asm/unaligned.h>
Usually we put linux/* followed by asm/*.
> +#include <linux/dev_printk.h>
> +#include <linux/i2c.h>
> +
> +static inline int ovxxxx_read_reg(struct i2c_client *client, u16 reg,
> + unsigned int len, u32 *val)
> +{
> + struct i2c_msg msgs[2];
> + u8 addr_buf[2] = { reg >> 8, reg & 0xff };
Let's use unaligned.h or byteorder/generic.h?
__be16 addr_buf = cpu_to_be16(reg);
> + u8 data_buf[4] = { 0, };
0, is not needed.
> + int ret;
> +
> + if (len > 4)
> + return -EINVAL;
> +
> + msgs[0].addr = client->addr;
> + msgs[0].flags = 0;
> + msgs[0].len = ARRAY_SIZE(addr_buf);
> + msgs[0].buf = addr_buf;
msgs[0].buf = &addr_buf;
> + msgs[1].addr = client->addr;
> + msgs[1].flags = I2C_M_RD;
> + msgs[1].len = len;
> + msgs[1].buf = &data_buf[4 - len];
This trick I don't like. Can we have like other driver have it, i.e. switch
case for the possible length and explicit usage of the endian conversion calls?
> + ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
> + if (ret != ARRAY_SIZE(msgs)) {
> + dev_err(&client->dev, "read error: reg=0x%4x: %d\n", reg, ret);
> + return -EIO;
> + }
> +
> + *val = get_unaligned_be32(data_buf);
> +
> + return 0;
> +}
> +
> +#define ovxxxx_read_reg8(s, r, v) ovxxxx_read_reg(s, r, 1, v)
> +#define ovxxxx_read_reg16(s, r, v) ovxxxx_read_reg(s, r, 2, v)
> +#define ovxxxx_read_reg24(s, r, v) ovxxxx_read_reg(s, r, 3, v)
> +
> +static inline int ovxxxx_write_reg(struct i2c_client *client, u16 reg,
> + unsigned int len, u32 val)
> +{
> + u8 buf[6];
> + int ret;
> +
> + if (len > 4)
> + return -EINVAL;
> + put_unaligned_be16(reg, buf);
> + put_unaligned_be32(val << (8 * (4 - len)), buf + 2);
Something similar here?
> + ret = i2c_master_send(client, buf, len + 2);
> + if (ret != len + 2) {
> + dev_err(&client->dev, "write error: reg=0x%4x: %d\n", reg, ret);
> + return -EIO;
> + }
> +
> + return 0;
> +}
> +
> +#define ovxxxx_write_reg8(s, r, v) ovxxxx_write_reg(s, r, 1, v)
> +#define ovxxxx_write_reg16(s, r, v) ovxxxx_write_reg(s, r, 2, v)
> +#define ovxxxx_write_reg24(s, r, v) ovxxxx_write_reg(s, r, 3, v)
> +
> +static inline int ovxxxx_mod_reg(struct i2c_client *client, u16 reg, u8 mask, u8 val)
> +{
> + u32 readval;
> + int ret;
> +
> + ret = ovxxxx_read_reg8(client, reg, &readval);
> + if (ret < 0)
> + return ret;
> + readval &= ~mask;
> + val &= mask;
> + val |= readval;
Usual pattern:
val = (readval & ~mask) | (val & mask);
> + return ovxxxx_write_reg8(client, reg, val);
> +}
--
With Best Regards,
Andy Shevchenko
