Using dev as name for variables pointing to struct ov2680_device is a bit
unfortunate choice.
All the recently added / rewritten code is already using sensor for this,
replace the remaining usages of "struct ov2680_device *dev" with
"struct ov2680_device *sensor".
Note the power_up()/power_down() related functions are not changed as
these will be removed in one of the next patches.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
.../media/atomisp/i2c/atomisp-ov2680.c | 74 +++++++++----------
1 file changed, 37 insertions(+), 37 deletions(-)
diff --git a/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c b/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c
index 881340d7466f..5f26508a1e5a 100644
--- a/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c
+++ b/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c
@@ -472,7 +472,7 @@ static int ov2680_set_fmt(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_format *format)
{
- struct ov2680_device *dev = to_ov2680_sensor(sd);
+ struct ov2680_device *sensor = to_ov2680_sensor(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
struct v4l2_mbus_framefmt *fmt;
unsigned int width, height;
@@ -485,17 +485,17 @@ static int ov2680_set_fmt(struct v4l2_subdev *sd,
width = min_t(unsigned int, ALIGN(format->format.width, 2), OV2680_NATIVE_WIDTH);
height = min_t(unsigned int, ALIGN(format->format.height, 2), OV2680_NATIVE_HEIGHT);
- fmt = __ov2680_get_pad_format(dev, sd_state, format->pad, format->which);
- ov2680_fill_format(dev, fmt, width, height);
+ fmt = __ov2680_get_pad_format(sensor, sd_state, format->pad, format->which);
+ ov2680_fill_format(sensor, fmt, width, height);
format->format = *fmt;
if (format->which == V4L2_SUBDEV_FORMAT_TRY)
return 0;
- mutex_lock(&dev->input_lock);
- ov2680_calc_mode(dev, fmt->width, fmt->height);
- mutex_unlock(&dev->input_lock);
+ mutex_lock(&sensor->input_lock);
+ ov2680_calc_mode(sensor, fmt->width, fmt->height);
+ mutex_unlock(&sensor->input_lock);
return 0;
}
@@ -503,10 +503,10 @@ static int ov2680_get_fmt(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_format *format)
{
- struct ov2680_device *dev = to_ov2680_sensor(sd);
+ struct ov2680_device *sensor = to_ov2680_sensor(sd);
struct v4l2_mbus_framefmt *fmt;
- fmt = __ov2680_get_pad_format(dev, sd_state, format->pad, format->which);
+ fmt = __ov2680_get_pad_format(sensor, sd_state, format->pad, format->which);
format->format = *fmt;
return 0;
}
@@ -596,17 +596,17 @@ static int ov2680_s_stream(struct v4l2_subdev *sd, int enable)
static int ov2680_s_config(struct v4l2_subdev *sd,
int irq, void *platform_data)
{
- struct ov2680_device *dev = to_ov2680_sensor(sd);
+ struct ov2680_device *sensor = to_ov2680_sensor(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
int ret = 0;
if (!platform_data)
return -ENODEV;
- dev->platform_data =
+ sensor->platform_data =
(struct camera_sensor_platform_data *)platform_data;
- mutex_lock(&dev->input_lock);
+ mutex_lock(&sensor->input_lock);
ret = pm_runtime_get_sync(&client->dev);
if (ret < 0) {
@@ -614,7 +614,7 @@ static int ov2680_s_config(struct v4l2_subdev *sd,
goto fail_power_on;
}
- ret = dev->platform_data->csi_cfg(sd, 1);
+ ret = sensor->platform_data->csi_cfg(sd, 1);
if (ret)
goto fail_csi_cfg;
@@ -627,16 +627,16 @@ static int ov2680_s_config(struct v4l2_subdev *sd,
/* turn off sensor, after probed */
pm_runtime_put(&client->dev);
- mutex_unlock(&dev->input_lock);
+ mutex_unlock(&sensor->input_lock);
return 0;
fail_csi_cfg:
- dev->platform_data->csi_cfg(sd, 0);
+ sensor->platform_data->csi_cfg(sd, 0);
fail_power_on:
pm_runtime_put(&client->dev);
dev_err(&client->dev, "sensor power-gating failed\n");
- mutex_unlock(&dev->input_lock);
+ mutex_unlock(&sensor->input_lock);
return ret;
}
@@ -770,35 +770,35 @@ static int ov2680_init_controls(struct ov2680_device *sensor)
static void ov2680_remove(struct i2c_client *client)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
- struct ov2680_device *dev = to_ov2680_sensor(sd);
+ struct ov2680_device *sensor = to_ov2680_sensor(sd);
dev_dbg(&client->dev, "ov2680_remove...\n");
- dev->platform_data->csi_cfg(sd, 0);
+ sensor->platform_data->csi_cfg(sd, 0);
v4l2_device_unregister_subdev(sd);
- media_entity_cleanup(&dev->sd.entity);
- v4l2_ctrl_handler_free(&dev->ctrls.handler);
+ media_entity_cleanup(&sensor->sd.entity);
+ v4l2_ctrl_handler_free(&sensor->ctrls.handler);
pm_runtime_disable(&client->dev);
- kfree(dev);
+ kfree(sensor);
}
static int ov2680_probe(struct i2c_client *client)
{
- struct ov2680_device *dev;
+ struct ov2680_device *sensor;
int ret;
void *pdata;
- dev = kzalloc(sizeof(*dev), GFP_KERNEL);
- if (!dev)
+ sensor = kzalloc(sizeof(*sensor), GFP_KERNEL);
+ if (!sensor)
return -ENOMEM;
- mutex_init(&dev->input_lock);
+ mutex_init(&sensor->input_lock);
- dev->client = client;
- v4l2_i2c_subdev_init(&dev->sd, client, &ov2680_ops);
+ sensor->client = client;
+ v4l2_i2c_subdev_init(&sensor->sd, client, &ov2680_ops);
- pdata = gmin_camera_platform_data(&dev->sd,
+ pdata = gmin_camera_platform_data(&sensor->sd,
ATOMISP_INPUT_FORMAT_RAW_10,
atomisp_bayer_order_bggr);
if (!pdata) {
@@ -811,29 +811,29 @@ static int ov2680_probe(struct i2c_client *client)
pm_runtime_set_autosuspend_delay(&client->dev, 1000);
pm_runtime_use_autosuspend(&client->dev);
- ret = ov2680_s_config(&dev->sd, client->irq, pdata);
+ ret = ov2680_s_config(&sensor->sd, client->irq, pdata);
if (ret)
goto out_free;
- dev->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
- dev->pad.flags = MEDIA_PAD_FL_SOURCE;
- dev->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
+ sensor->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+ sensor->pad.flags = MEDIA_PAD_FL_SOURCE;
+ sensor->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
- ret = ov2680_init_controls(dev);
+ ret = ov2680_init_controls(sensor);
if (ret) {
ov2680_remove(client);
return ret;
}
- ret = media_entity_pads_init(&dev->sd.entity, 1, &dev->pad);
+ ret = media_entity_pads_init(&sensor->sd.entity, 1, &sensor->pad);
if (ret) {
ov2680_remove(client);
return ret;
}
- ov2680_fill_format(dev, &dev->mode.fmt, OV2680_NATIVE_WIDTH, OV2680_NATIVE_HEIGHT);
+ ov2680_fill_format(sensor, &sensor->mode.fmt, OV2680_NATIVE_WIDTH, OV2680_NATIVE_HEIGHT);
- ret = atomisp_register_i2c_module(&dev->sd, pdata, RAW_CAMERA);
+ ret = atomisp_register_i2c_module(&sensor->sd, pdata, RAW_CAMERA);
if (ret) {
ov2680_remove(client);
return ret;
@@ -842,8 +842,8 @@ static int ov2680_probe(struct i2c_client *client)
return 0;
out_free:
dev_dbg(&client->dev, "+++ out free\n");
- v4l2_device_unregister_subdev(&dev->sd);
- kfree(dev);
+ v4l2_device_unregister_subdev(&sensor->sd);
+ kfree(sensor);
return ret;
}
--
2.39.0
