[PATCH 47/57] media: atomisp: ov2680: Add runtime-pm support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add runtime-pm support. This is a preparation patch for letting
ACPI deal with the regulators and clocks instead of the DIY code
in atomisp_gmin_platform.c.

Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
 .../media/atomisp/i2c/atomisp-ov2680.c        | 57 ++++++++++++-------
 drivers/staging/media/atomisp/i2c/ov2680.h    |  1 -
 2 files changed, 36 insertions(+), 22 deletions(-)

diff --git a/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c b/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c
index 2a8c4508cc66..881340d7466f 100644
--- a/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c
+++ b/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c
@@ -19,6 +19,7 @@
 #include <linux/device.h>
 #include <linux/i2c.h>
 #include <linux/module.h>
+#include <linux/pm_runtime.h>
 #include <linux/types.h>
 #include <media/ovxxxx_16bit_addr_reg_helpers.h>
 #include <media/v4l2-device.h>
@@ -138,7 +139,8 @@ static int ov2680_s_ctrl(struct v4l2_ctrl *ctrl)
 	struct ov2680_device *sensor = to_ov2680_sensor(sd);
 	int ret;
 
-	if (!sensor->power_on) {
+	/* Only apply changes to the controls if the device is powered up */
+	if (!pm_runtime_get_if_in_use(sensor->sd.dev)) {
 		ov2680_set_bayer_order(sensor, &sensor->mode.fmt);
 		return 0;
 	}
@@ -162,6 +164,8 @@ static int ov2680_s_ctrl(struct v4l2_ctrl *ctrl)
 	default:
 		ret = -EINVAL;
 	}
+
+	pm_runtime_put(sensor->sd.dev);
 	return ret;
 }
 
@@ -244,9 +248,6 @@ static int power_up(struct v4l2_subdev *sd)
 		return -ENODEV;
 	}
 
-	if (dev->power_on)
-		return 0; /* Already on */
-
 	/* power control */
 	ret = power_ctrl(sd, 1);
 	if (ret)
@@ -275,7 +276,6 @@ static int power_up(struct v4l2_subdev *sd)
 	if (ret)
 		goto fail_init_registers;
 
-	dev->power_on = true;
 	return 0;
 
 fail_init_registers:
@@ -301,9 +301,6 @@ static int power_down(struct v4l2_subdev *sd)
 		return -ENODEV;
 	}
 
-	if (!dev->power_on)
-		return 0; /* Already off */
-
 	ret = dev->platform_data->flisclk_ctrl(sd, 0);
 	if (ret)
 		dev_err(&client->dev, "flisclk failed\n");
@@ -323,7 +320,6 @@ static int power_down(struct v4l2_subdev *sd)
 		return ret;
 	}
 
-	dev->power_on = false;
 	return 0;
 }
 
@@ -562,8 +558,8 @@ static int ov2680_s_stream(struct v4l2_subdev *sd, int enable)
 	}
 
 	if (enable) {
-		ret = power_up(sd);
-		if (ret)
+		ret = pm_runtime_get_sync(sensor->sd.dev);
+		if (ret < 0)
 			goto error_unlock;
 
 		ret = ov2680_set_mode(sensor);
@@ -580,7 +576,7 @@ static int ov2680_s_stream(struct v4l2_subdev *sd, int enable)
 			goto error_power_down;
 	} else {
 		ovxxxx_write_reg8(client, OV2680_SW_STREAM, OV2680_STOP_STREAMING);
-		power_down(sd);
+		pm_runtime_put(sensor->sd.dev);
 	}
 
 	sensor->is_streaming = enable;
@@ -591,7 +587,7 @@ static int ov2680_s_stream(struct v4l2_subdev *sd, int enable)
 	return 0;
 
 error_power_down:
-	power_down(sd);
+	pm_runtime_put(sensor->sd.dev);
 error_unlock:
 	mutex_unlock(&sensor->input_lock);
 	return ret;
@@ -612,8 +608,8 @@ static int ov2680_s_config(struct v4l2_subdev *sd,
 
 	mutex_lock(&dev->input_lock);
 
-	ret = power_up(sd);
-	if (ret) {
+	ret = pm_runtime_get_sync(&client->dev);
+	if (ret < 0) {
 		dev_err(&client->dev, "ov2680 power-up err.\n");
 		goto fail_power_on;
 	}
@@ -630,11 +626,7 @@ static int ov2680_s_config(struct v4l2_subdev *sd,
 	}
 
 	/* turn off sensor, after probed */
-	ret = power_down(sd);
-	if (ret) {
-		dev_err(&client->dev, "ov2680 power-off err.\n");
-		goto fail_csi_cfg;
-	}
+	pm_runtime_put(&client->dev);
 	mutex_unlock(&dev->input_lock);
 
 	return 0;
@@ -642,7 +634,7 @@ static int ov2680_s_config(struct v4l2_subdev *sd,
 fail_csi_cfg:
 	dev->platform_data->csi_cfg(sd, 0);
 fail_power_on:
-	power_down(sd);
+	pm_runtime_put(&client->dev);
 	dev_err(&client->dev, "sensor power-gating failed\n");
 	mutex_unlock(&dev->input_lock);
 	return ret;
@@ -787,6 +779,7 @@ static void ov2680_remove(struct i2c_client *client)
 	v4l2_device_unregister_subdev(sd);
 	media_entity_cleanup(&dev->sd.entity);
 	v4l2_ctrl_handler_free(&dev->ctrls.handler);
+	pm_runtime_disable(&client->dev);
 	kfree(dev);
 }
 
@@ -813,6 +806,11 @@ static int ov2680_probe(struct i2c_client *client)
 		goto out_free;
 	}
 
+	pm_runtime_set_suspended(&client->dev);
+	pm_runtime_enable(&client->dev);
+	pm_runtime_set_autosuspend_delay(&client->dev, 1000);
+	pm_runtime_use_autosuspend(&client->dev);
+
 	ret = ov2680_s_config(&dev->sd, client->irq, pdata);
 	if (ret)
 		goto out_free;
@@ -849,6 +847,22 @@ static int ov2680_probe(struct i2c_client *client)
 	return ret;
 }
 
+static int ov2680_suspend(struct device *dev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+
+	return power_down(sd);
+}
+
+static int ov2680_resume(struct device *dev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+
+	return power_up(sd);
+}
+
+static DEFINE_RUNTIME_DEV_PM_OPS(ov2680_pm_ops, ov2680_suspend, ov2680_resume, NULL);
+
 static const struct acpi_device_id ov2680_acpi_match[] = {
 	{"XXOV2680"},
 	{"OVTI2680"},
@@ -859,6 +873,7 @@ MODULE_DEVICE_TABLE(acpi, ov2680_acpi_match);
 static struct i2c_driver ov2680_driver = {
 	.driver = {
 		.name = "ov2680",
+		.pm = pm_sleep_ptr(&ov2680_pm_ops),
 		.acpi_match_table = ov2680_acpi_match,
 	},
 	.probe_new = ov2680_probe,
diff --git a/drivers/staging/media/atomisp/i2c/ov2680.h b/drivers/staging/media/atomisp/i2c/ov2680.h
index f0641dd611c3..58593da50f6f 100644
--- a/drivers/staging/media/atomisp/i2c/ov2680.h
+++ b/drivers/staging/media/atomisp/i2c/ov2680.h
@@ -120,7 +120,6 @@ struct ov2680_device {
 	struct mutex input_lock;
 	struct i2c_client *client;
 	struct camera_sensor_platform_data *platform_data;
-	bool power_on;
 	bool is_streaming;
 
 	struct ov2680_mode {
-- 
2.39.0





[Index of Archives]     [Linux Driver Development]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux