Hi Umang,
Am 23.01.23 um 08:48 schrieb Umang Jain:
Hi Stefan,
Thank for the testing.
On 1/23/23 5:04 AM, Stefan Wahren wrote:
Hi Umang,
Am 20.01.23 um 21:10 schrieb Umang Jain:
This series just introduces five extra patches for dropping include
directives from Makefiles (suggested by Greg KH) and rebased.
The main patch (6/6) removes platform device/driver abuse and moves
things to standard device/driver model using a custom_bus. Specific
details are elaborated in the commit message.
The patch series is based on top of d514392f17fd (tag: next-20230120)
of linux-next.
applied this series on top of linux-next and build it with
arm/multi_v7_defconfig plus the following:
CONFIG_BCM_VIDEOCORE=y
CONFIG_BCM2835_VCHIQ=m
CONFIG_VCHIQ_CDEV=y
CONFIG_SND_BCM2835=m
CONFIG_VIDEO_BCM2835=m
CONFIG_BCM2835_VCHIQ_MMAL=m
and the devices doesn't register on Raspberry Pi 3 B Plus:
[ 25.523337] vchiq: module is from the staging directory, the
quality is unknown, you have been warned.
[ 25.541647] bcm2835_vchiq 3f00b840.mailbox: Failed to register
bcm2835_audio vchiq device
[ 25.553692] bcm2835_vchiq 3f00b840.mailbox: Failed to register
bcm2835-camera vchiq device
I was able to reproduce and it seems the issue here is the change
mentioned in the cover
- drop dma_set_mask_and_coherent
in V6.
(I usually test patches on RPi 4B with vcsm-cma and bcm2835-isp
applied so my branch has the DMA hunk included while I was testing V6)
just to avoid misunderstandings, did you read
drivers/staging/vc04_services/interface/TESTING ?
The Raspberry Pi 4 is currently not fully supported for VCHIQ in
mainline. From my limited understanding the DMA controller driver needs
40 bit support, so VCHIQ on BCM2711 can use it. This part is currently
only available in the vendor tree. The reason why the driver is
unexpectedly probing is a historical issue in the devicetree :-(
Raspberry Pi 4 support is not considered as necessary for moving out of
staging.
Below is the hunk which should resolve the issue.
--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_device.c
+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_device.c
@@ -6,6 +6,7 @@
*/
#include <linux/device/bus.h>
+#include <linux/dma-mapping.h>
#include <linux/slab.h>
#include <linux/string.h>
@@ -72,6 +73,12 @@ int vchiq_device_register(struct device *parent,
const char *name)
device->dev.type = &vchiq_device_type;
device->dev.release = vchiq_device_release;
+ ret = dma_set_mask_and_coherent(&device->dev, DMA_BIT_MASK(32));
+ if (ret < 0) {
+ vchiq_device_release(&device->dev);
+ return ret;
+ }
+
ret = device_register(&device->dev);
if (ret) {
put_device(&device->dev);
It seems we need to include the dma_set_mask_and_coherent() even if
bcm2835-audio, bcm2835-camera device doesn't do DMA? I need to look
into why is that/
Laurent, any thoughts on this please?
