Re: [PATCH 13/15] backlight: omap1: Use backlight helpers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, 07 Jan 2023 19:26:27 +0100, Sam Ravnborg via B4 Submission Endpoint
<devnull+sam.ravnborg.org@xxxxxxxxxx> wrote:

> From: Sam Ravnborg <sam@xxxxxxxxxxxx>
> 
> Rework backlight handling to avoid access to the deprecated
> backlight_properties.fb_blank member.
> 
> The rework includes removal of get_brightness() operation,
> because there was no read back from HW so no use for it.
> 
> Signed-off-by: Sam Ravnborg <sam@xxxxxxxxxxxx>
> Cc: Lee Jones <lee@xxxxxxxxxx>
> Cc: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
> Cc: Jingoo Han <jingoohan1@xxxxxxxxx>
> ---
>  drivers/video/backlight/omap1_bl.c | 67
> +++++--------------------------------- 1 file changed, 9 insertions(+), 58
> deletions(-)
> 
> diff --git a/drivers/video/backlight/omap1_bl.c
> b/drivers/video/backlight/omap1_bl.c index 69a49384b3de..49f37da857e7 100644
> --- a/drivers/video/backlight/omap1_bl.c
> +++ b/drivers/video/backlight/omap1_bl.c
> @@ -20,9 +20,6 @@
>  #define OMAPBL_MAX_INTENSITY		0xff
>  
>  struct omap_backlight {
> -	int powermode;
> -	int current_intensity;
> -
>  	struct device *dev;
>  	struct omap_backlight_config *pdata;
>  };
> @@ -37,82 +34,40 @@ static inline void omapbl_send_enable(int enable)
>  	omap_writeb(enable, OMAP_PWL_CLK_ENABLE);
>  }
>  
> -static void omapbl_blank(struct omap_backlight *bl, int mode)
> -{
> -	if (bl->pdata->set_power)
> -		bl->pdata->set_power(bl->dev, mode);
> -
> -	switch (mode) {
> -	case FB_BLANK_NORMAL:
> -	case FB_BLANK_VSYNC_SUSPEND:
> -	case FB_BLANK_HSYNC_SUSPEND:
> -	case FB_BLANK_POWERDOWN:
> -		omapbl_send_intensity(0);
> -		omapbl_send_enable(0);
> -		break;
> -
> -	case FB_BLANK_UNBLANK:
> -		omapbl_send_intensity(bl->current_intensity);
> -		omapbl_send_enable(1);
> -		break;
> -	}
> -}
> -
>  #ifdef CONFIG_PM_SLEEP
>  static int omapbl_suspend(struct device *dev)
>  {
>  	struct backlight_device *bl_dev = dev_get_drvdata(dev);
> -	struct omap_backlight *bl = bl_get_data(bl_dev);
>  
> -	omapbl_blank(bl, FB_BLANK_POWERDOWN);
> +	backlight_disable(bl_dev);
>  	return 0;
>  }
>  
>  static int omapbl_resume(struct device *dev)
>  {
>  	struct backlight_device *bl_dev = dev_get_drvdata(dev);
> -	struct omap_backlight *bl = bl_get_data(bl_dev);
>  
> -	omapbl_blank(bl, bl->powermode);
> +	backlight_enable(bl_dev);
>  	return 0;
>  }
>  #endif
>  
> -static int omapbl_set_power(struct backlight_device *dev, int state)
> -{
> -	struct omap_backlight *bl = bl_get_data(dev);
> -
> -	omapbl_blank(bl, state);
> -	bl->powermode = state;
> -
> -	return 0;
> -}
> -
>  static int omapbl_update_status(struct backlight_device *dev)
>  {
> -	struct omap_backlight *bl = bl_get_data(dev);
> +	int brightness = backlight_get_brightness(dev);
>  
> -	if (bl->current_intensity != dev->props.brightness) {
> -		if (bl->powermode == FB_BLANK_UNBLANK)
> -			omapbl_send_intensity(dev->props.brightness);
> -		bl->current_intensity = dev->props.brightness;
> +	if (brightness > 0) {
> +		omapbl_send_intensity(dev->props.brightness);
> +		omapbl_send_enable(1);
> +	} else {
> +		omapbl_send_intensity(0);
> +		omapbl_send_enable(0);
>  	}
>  
> -	if (dev->props.fb_blank != bl->powermode)
> -		omapbl_set_power(dev, dev->props.fb_blank);
> -
>  	return 0;
>  }
>  
> -static int omapbl_get_intensity(struct backlight_device *dev)
> -{
> -	struct omap_backlight *bl = bl_get_data(dev);
> -
> -	return bl->current_intensity;
> -}
> -
>  static const struct backlight_ops omapbl_ops = {
> -	.get_brightness = omapbl_get_intensity,
>  	.update_status  = omapbl_update_status,
>  };
>  
> @@ -139,9 +94,6 @@ static int omapbl_probe(struct platform_device *pdev)
>  	if (IS_ERR(dev))
>  		return PTR_ERR(dev);
>  
> -	bl->powermode = FB_BLANK_POWERDOWN;
> -	bl->current_intensity = 0;
> -
>  	bl->pdata = pdata;
>  	bl->dev = &pdev->dev;
>  
> @@ -149,7 +101,6 @@ static int omapbl_probe(struct platform_device *pdev)
>  
>  	omap_cfg_reg(PWL);	/* Conflicts with UART3 */
>  
> -	dev->props.fb_blank = FB_BLANK_UNBLANK;
>  	dev->props.brightness = pdata->default_intensity;
>  	omapbl_update_status(dev);
>  
> 
> -- 
> 2.34.1

Wow that gets rid of a lot of unnecessary code!

Reviewed-by: Stephen Kitt <steve@xxxxxxx>

Attachment: pgpQo62mhgZsy.pgp
Description: OpenPGP digital signature


[Index of Archives]     [Linux Driver Development]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux