[PATCH 13/14] staging: media: remove davinci vpfe_capture driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Arnd Bergmann <arnd@xxxxxxxx>

This driver was for the davinci dm644x and dm3xx platforms that are
now removed from the kernel, so there are no more users.

Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
---
 MAINTAINERS                                   |    1 -
 drivers/staging/media/Kconfig                 |    1 -
 drivers/staging/media/Makefile                |    1 -
 .../media/deprecated/vpfe_capture/Kconfig     |   58 -
 .../media/deprecated/vpfe_capture/Makefile    |    4 -
 .../media/deprecated/vpfe_capture/TODO        |    7 -
 .../deprecated/vpfe_capture/ccdc_hw_device.h  |   80 -
 .../deprecated/vpfe_capture/dm355_ccdc.c      |  934 --------
 .../deprecated/vpfe_capture/dm355_ccdc.h      |  308 ---
 .../deprecated/vpfe_capture/dm355_ccdc_regs.h |  297 ---
 .../deprecated/vpfe_capture/dm644x_ccdc.c     |  879 --------
 .../deprecated/vpfe_capture/dm644x_ccdc.h     |  171 --
 .../vpfe_capture/dm644x_ccdc_regs.h           |  140 --
 .../media/deprecated/vpfe_capture/isif.c      | 1127 ----------
 .../media/deprecated/vpfe_capture/isif.h      |  518 -----
 .../media/deprecated/vpfe_capture/isif_regs.h |  256 ---
 .../deprecated/vpfe_capture/vpfe_capture.c    | 1902 -----------------
 include/media/davinci/vpfe_capture.h          |  177 --
 18 files changed, 6861 deletions(-)
 delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/Kconfig
 delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/Makefile
 delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/TODO
 delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/ccdc_hw_device.h
 delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc.c
 delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc.h
 delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc_regs.h
 delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc.c
 delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc.h
 delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc_regs.h
 delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/isif.c
 delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/isif.h
 delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/isif_regs.h
 delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/vpfe_capture.c
 delete mode 100644 include/media/davinci/vpfe_capture.h

diff --git a/MAINTAINERS b/MAINTAINERS
index bb3e20381128..5f18c0264e98 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20491,7 +20491,6 @@ W:	https://linuxtv.org
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/mhadli/v4l-dvb-davinci_devices.git
 F:	drivers/media/platform/ti/davinci/
-F:	drivers/staging/media/deprecated/vpfe_capture/
 F:	include/media/davinci/
 
 TI ENHANCED CAPTURE (eCAP) DRIVER
diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig
index d4f03b203ae5..ddab8e0a0809 100644
--- a/drivers/staging/media/Kconfig
+++ b/drivers/staging/media/Kconfig
@@ -57,7 +57,6 @@ source "drivers/staging/media/deprecated/meye/Kconfig"
 source "drivers/staging/media/deprecated/saa7146/Kconfig"
 source "drivers/staging/media/deprecated/stkwebcam/Kconfig"
 source "drivers/staging/media/deprecated/tm6000/Kconfig"
-source "drivers/staging/media/deprecated/vpfe_capture/Kconfig"
 source "drivers/staging/media/deprecated/zr364xx/Kconfig"
 endif
 
diff --git a/drivers/staging/media/Makefile b/drivers/staging/media/Makefile
index a387692b84f2..38e6cdfea29c 100644
--- a/drivers/staging/media/Makefile
+++ b/drivers/staging/media/Makefile
@@ -14,5 +14,4 @@ obj-$(CONFIG_VIDEO_IPU3_IMGU)	+= ipu3/
 obj-$(CONFIG_VIDEO_TM6000)	+= deprecated/tm6000/
 obj-$(CONFIG_VIDEO_VIU)		+= deprecated/fsl-viu/
 obj-$(CONFIG_USB_ZR364XX)	+= deprecated/zr364xx/
-obj-y += deprecated/vpfe_capture/
 obj-y += deprecated/saa7146/
diff --git a/drivers/staging/media/deprecated/vpfe_capture/Kconfig b/drivers/staging/media/deprecated/vpfe_capture/Kconfig
deleted file mode 100644
index 10250e7e566b..000000000000
--- a/drivers/staging/media/deprecated/vpfe_capture/Kconfig
+++ /dev/null
@@ -1,58 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-config VIDEO_DM6446_CCDC
-	tristate "TI DM6446 CCDC video capture driver"
-	depends on V4L_PLATFORM_DRIVERS
-	depends on VIDEO_DEV
-	depends on ARCH_DAVINCI || COMPILE_TEST
-	depends on I2C
-	select VIDEOBUF_DMA_CONTIG
-	help
-	  Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces
-	  with decoder modules such as TVP5146 over BT656 or
-	  sensor module such as MT9T001 over a raw interface. This
-	  module configures the interface and CCDC/ISIF to do
-	  video frame capture from slave decoders.
-
-	  This driver is deprecated and is scheduled for removal by
-	  the beginning of 2023. See the TODO file for more information.
-
-	  To compile this driver as a module, choose M here. There will
-	  be two modules called vpfe_capture.ko and dm644x_ccdc.ko
-
-config VIDEO_DM355_CCDC
-	tristate "TI DM355 CCDC video capture driver"
-	depends on V4L_PLATFORM_DRIVERS
-	depends on VIDEO_DEV
-	depends on ARCH_DAVINCI || COMPILE_TEST
-	depends on I2C
-	select VIDEOBUF_DMA_CONTIG
-	help
-	  Enables DM355 CCD hw module. DM355 CCDC hw interfaces
-	  with decoder modules such as TVP5146 over BT656 or
-	  sensor module such as MT9T001 over a raw interface. This
-	  module configures the interface and CCDC/ISIF to do
-	  video frame capture from a slave decoders
-
-	  This driver is deprecated and is scheduled for removal by
-	  the beginning of 2023. See the TODO file for more information.
-
-	  To compile this driver as a module, choose M here. There will
-	  be two modules called vpfe_capture.ko and dm355_ccdc.ko
-
-config VIDEO_DM365_ISIF
-	tristate "TI DM365 ISIF video capture driver"
-	depends on V4L_PLATFORM_DRIVERS
-	depends on VIDEO_DEV
-	depends on ARCH_DAVINCI || COMPILE_TEST
-	depends on I2C
-	select VIDEOBUF_DMA_CONTIG
-	help
-	  Enables ISIF hw module. This is the hardware module for
-	  configuring ISIF in VPFE to capture Raw Bayer RGB data from
-	  a image sensor or YUV data from a YUV source.
-
-	  This driver is deprecated and is scheduled for removal by
-	  the beginning of 2023. See the TODO file for more information.
-
-	  To compile this driver as a module, choose M here. There will
-	  be two modules called vpfe_capture.ko and isif.ko
diff --git a/drivers/staging/media/deprecated/vpfe_capture/Makefile b/drivers/staging/media/deprecated/vpfe_capture/Makefile
deleted file mode 100644
index 609e8dc09ce7..000000000000
--- a/drivers/staging/media/deprecated/vpfe_capture/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_VIDEO_DM6446_CCDC) += vpfe_capture.o dm644x_ccdc.o
-obj-$(CONFIG_VIDEO_DM355_CCDC) += vpfe_capture.o dm355_ccdc.o
-obj-$(CONFIG_VIDEO_DM365_ISIF) += vpfe_capture.o isif.o
diff --git a/drivers/staging/media/deprecated/vpfe_capture/TODO b/drivers/staging/media/deprecated/vpfe_capture/TODO
deleted file mode 100644
index ce654d7337af..000000000000
--- a/drivers/staging/media/deprecated/vpfe_capture/TODO
+++ /dev/null
@@ -1,7 +0,0 @@
-These are one of the few drivers still not using the vb2
-framework, so these drivers are now deprecated with the intent of
-removing them altogether by the beginning of 2023.
-
-In order to keep these drivers they have to be converted to vb2.
-If someone is interested in doing this work, then contact the
-linux-media mailinglist (https://linuxtv.org/lists.php).
diff --git a/drivers/staging/media/deprecated/vpfe_capture/ccdc_hw_device.h b/drivers/staging/media/deprecated/vpfe_capture/ccdc_hw_device.h
deleted file mode 100644
index a545052a95a9..000000000000
--- a/drivers/staging/media/deprecated/vpfe_capture/ccdc_hw_device.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2008-2009 Texas Instruments Inc
- *
- * ccdc device API
- */
-#ifndef _CCDC_HW_DEVICE_H
-#define _CCDC_HW_DEVICE_H
-
-#ifdef __KERNEL__
-#include <linux/videodev2.h>
-#include <linux/device.h>
-#include <media/davinci/vpfe_types.h>
-#include <media/davinci/ccdc_types.h>
-
-/*
- * ccdc hw operations
- */
-struct ccdc_hw_ops {
-	/* Pointer to initialize function to initialize ccdc device */
-	int (*open) (struct device *dev);
-	/* Pointer to deinitialize function */
-	int (*close) (struct device *dev);
-	/* set ccdc base address */
-	void (*set_ccdc_base)(void *base, int size);
-	/* Pointer to function to enable or disable ccdc */
-	void (*enable) (int en);
-	/* reset sbl. only for 6446 */
-	void (*reset) (void);
-	/* enable output to sdram */
-	void (*enable_out_to_sdram) (int en);
-	/* Pointer to function to set hw parameters */
-	int (*set_hw_if_params) (struct vpfe_hw_if_param *param);
-	/* get interface parameters */
-	int (*get_hw_if_params) (struct vpfe_hw_if_param *param);
-	/* Pointer to function to configure ccdc */
-	int (*configure) (void);
-
-	/* Pointer to function to set buffer type */
-	int (*set_buftype) (enum ccdc_buftype buf_type);
-	/* Pointer to function to get buffer type */
-	enum ccdc_buftype (*get_buftype) (void);
-	/* Pointer to function to set frame format */
-	int (*set_frame_format) (enum ccdc_frmfmt frm_fmt);
-	/* Pointer to function to get frame format */
-	enum ccdc_frmfmt (*get_frame_format) (void);
-	/* enumerate hw pix formats */
-	int (*enum_pix)(u32 *hw_pix, int i);
-	/* Pointer to function to set buffer type */
-	u32 (*get_pixel_format) (void);
-	/* Pointer to function to get pixel format. */
-	int (*set_pixel_format) (u32 pixfmt);
-	/* Pointer to function to set image window */
-	int (*set_image_window) (struct v4l2_rect *win);
-	/* Pointer to function to set image window */
-	void (*get_image_window) (struct v4l2_rect *win);
-	/* Pointer to function to get line length */
-	unsigned int (*get_line_length) (void);
-
-	/* Pointer to function to set frame buffer address */
-	void (*setfbaddr) (unsigned long addr);
-	/* Pointer to function to get field id */
-	int (*getfid) (void);
-};
-
-struct ccdc_hw_device {
-	/* ccdc device name */
-	char name[32];
-	/* module owner */
-	struct module *owner;
-	/* hw ops */
-	struct ccdc_hw_ops hw_ops;
-};
-
-/* Used by CCDC module to register & unregister with vpfe capture driver */
-int vpfe_register_ccdc_device(const struct ccdc_hw_device *dev);
-void vpfe_unregister_ccdc_device(const struct ccdc_hw_device *dev);
-
-#endif
-#endif
diff --git a/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc.c b/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc.c
deleted file mode 100644
index da8db53e9498..000000000000
--- a/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc.c
+++ /dev/null
@@ -1,934 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2005-2009 Texas Instruments Inc
- *
- * CCDC hardware module for DM355
- * ------------------------------
- *
- * This module is for configuring DM355 CCD controller of VPFE to capture
- * Raw yuv or Bayer RGB data from a decoder. CCDC has several modules
- * such as Defect Pixel Correction, Color Space Conversion etc to
- * pre-process the Bayer RGB data, before writing it to SDRAM.
- *
- * TODO: 1) Raw bayer parameter settings and bayer capture
- *	 2) Split module parameter structure to module specific ioctl structs
- *	 3) add support for lense shading correction
- *	 4) investigate if enum used for user space type definition
- *	    to be replaced by #defines or integer
- */
-#include <linux/platform_device.h>
-#include <linux/uaccess.h>
-#include <linux/videodev2.h>
-#include <linux/err.h>
-#include <linux/module.h>
-
-#include "dm355_ccdc.h"
-#include <media/davinci/vpss.h>
-
-#include "dm355_ccdc_regs.h"
-#include "ccdc_hw_device.h"
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("CCDC Driver for DM355");
-MODULE_AUTHOR("Texas Instruments");
-
-static struct ccdc_oper_config {
-	struct device *dev;
-	/* CCDC interface type */
-	enum vpfe_hw_if_type if_type;
-	/* Raw Bayer configuration */
-	struct ccdc_params_raw bayer;
-	/* YCbCr configuration */
-	struct ccdc_params_ycbcr ycbcr;
-	/* ccdc base address */
-	void __iomem *base_addr;
-} ccdc_cfg = {
-	/* Raw configurations */
-	.bayer = {
-		.pix_fmt = CCDC_PIXFMT_RAW,
-		.frm_fmt = CCDC_FRMFMT_PROGRESSIVE,
-		.win = CCDC_WIN_VGA,
-		.fid_pol = VPFE_PINPOL_POSITIVE,
-		.vd_pol = VPFE_PINPOL_POSITIVE,
-		.hd_pol = VPFE_PINPOL_POSITIVE,
-		.gain = {
-			.r_ye = 256,
-			.gb_g = 256,
-			.gr_cy = 256,
-			.b_mg = 256
-		},
-		.config_params = {
-			.datasft = 2,
-			.mfilt1 = CCDC_NO_MEDIAN_FILTER1,
-			.mfilt2 = CCDC_NO_MEDIAN_FILTER2,
-			.alaw = {
-				.gamma_wd = 2,
-			},
-			.blk_clamp = {
-				.sample_pixel = 1,
-				.dc_sub = 25
-			},
-			.col_pat_field0 = {
-				.olop = CCDC_GREEN_BLUE,
-				.olep = CCDC_BLUE,
-				.elop = CCDC_RED,
-				.elep = CCDC_GREEN_RED
-			},
-			.col_pat_field1 = {
-				.olop = CCDC_GREEN_BLUE,
-				.olep = CCDC_BLUE,
-				.elop = CCDC_RED,
-				.elep = CCDC_GREEN_RED
-			},
-		},
-	},
-	/* YCbCr configuration */
-	.ycbcr = {
-		.win = CCDC_WIN_PAL,
-		.pix_fmt = CCDC_PIXFMT_YCBCR_8BIT,
-		.frm_fmt = CCDC_FRMFMT_INTERLACED,
-		.fid_pol = VPFE_PINPOL_POSITIVE,
-		.vd_pol = VPFE_PINPOL_POSITIVE,
-		.hd_pol = VPFE_PINPOL_POSITIVE,
-		.bt656_enable = 1,
-		.pix_order = CCDC_PIXORDER_CBYCRY,
-		.buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED
-	},
-};
-
-
-/* Raw Bayer formats */
-static u32 ccdc_raw_bayer_pix_formats[] =
-		{V4L2_PIX_FMT_SBGGR8, V4L2_PIX_FMT_SBGGR16};
-
-/* Raw YUV formats */
-static u32 ccdc_raw_yuv_pix_formats[] =
-		{V4L2_PIX_FMT_UYVY, V4L2_PIX_FMT_YUYV};
-
-/* register access routines */
-static inline u32 regr(u32 offset)
-{
-	return __raw_readl(ccdc_cfg.base_addr + offset);
-}
-
-static inline void regw(u32 val, u32 offset)
-{
-	__raw_writel(val, ccdc_cfg.base_addr + offset);
-}
-
-static void ccdc_enable(int en)
-{
-	unsigned int temp;
-	temp = regr(SYNCEN);
-	temp &= (~CCDC_SYNCEN_VDHDEN_MASK);
-	temp |= (en & CCDC_SYNCEN_VDHDEN_MASK);
-	regw(temp, SYNCEN);
-}
-
-static void ccdc_enable_output_to_sdram(int en)
-{
-	unsigned int temp;
-	temp = regr(SYNCEN);
-	temp &= (~(CCDC_SYNCEN_WEN_MASK));
-	temp |= ((en << CCDC_SYNCEN_WEN_SHIFT) & CCDC_SYNCEN_WEN_MASK);
-	regw(temp, SYNCEN);
-}
-
-static void ccdc_config_gain_offset(void)
-{
-	/* configure gain */
-	regw(ccdc_cfg.bayer.gain.r_ye, RYEGAIN);
-	regw(ccdc_cfg.bayer.gain.gr_cy, GRCYGAIN);
-	regw(ccdc_cfg.bayer.gain.gb_g, GBGGAIN);
-	regw(ccdc_cfg.bayer.gain.b_mg, BMGGAIN);
-	/* configure offset */
-	regw(ccdc_cfg.bayer.ccdc_offset, OFFSET);
-}
-
-/*
- * ccdc_restore_defaults()
- * This function restore power on defaults in the ccdc registers
- */
-static int ccdc_restore_defaults(void)
-{
-	int i;
-
-	dev_dbg(ccdc_cfg.dev, "\nstarting ccdc_restore_defaults...");
-	/* set all registers to zero */
-	for (i = 0; i <= CCDC_REG_LAST; i += 4)
-		regw(0, i);
-
-	/* now override the values with power on defaults in registers */
-	regw(MODESET_DEFAULT, MODESET);
-	/* no culling support */
-	regw(CULH_DEFAULT, CULH);
-	regw(CULV_DEFAULT, CULV);
-	/* Set default Gain and Offset */
-	ccdc_cfg.bayer.gain.r_ye = GAIN_DEFAULT;
-	ccdc_cfg.bayer.gain.gb_g = GAIN_DEFAULT;
-	ccdc_cfg.bayer.gain.gr_cy = GAIN_DEFAULT;
-	ccdc_cfg.bayer.gain.b_mg = GAIN_DEFAULT;
-	ccdc_config_gain_offset();
-	regw(OUTCLIP_DEFAULT, OUTCLIP);
-	regw(LSCCFG2_DEFAULT, LSCCFG2);
-	/* select ccdc input */
-	if (vpss_select_ccdc_source(VPSS_CCDCIN)) {
-		dev_dbg(ccdc_cfg.dev, "\ncouldn't select ccdc input source");
-		return -EFAULT;
-	}
-	/* select ccdc clock */
-	if (vpss_enable_clock(VPSS_CCDC_CLOCK, 1) < 0) {
-		dev_dbg(ccdc_cfg.dev, "\ncouldn't enable ccdc clock");
-		return -EFAULT;
-	}
-	dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_restore_defaults...");
-	return 0;
-}
-
-static int ccdc_open(struct device *device)
-{
-	return ccdc_restore_defaults();
-}
-
-static int ccdc_close(struct device *device)
-{
-	/* disable clock */
-	vpss_enable_clock(VPSS_CCDC_CLOCK, 0);
-	/* do nothing for now */
-	return 0;
-}
-/*
- * ccdc_setwin()
- * This function will configure the window size to
- * be capture in CCDC reg.
- */
-static void ccdc_setwin(struct v4l2_rect *image_win,
-			enum ccdc_frmfmt frm_fmt, int ppc)
-{
-	int horz_start, horz_nr_pixels;
-	int vert_start, vert_nr_lines;
-	int mid_img = 0;
-
-	dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_setwin...");
-
-	/*
-	 * ppc - per pixel count. indicates how many pixels per cell
-	 * output to SDRAM. example, for ycbcr, it is one y and one c, so 2.
-	 * raw capture this is 1
-	 */
-	horz_start = image_win->left << (ppc - 1);
-	horz_nr_pixels = ((image_win->width) << (ppc - 1)) - 1;
-
-	/* Writing the horizontal info into the registers */
-	regw(horz_start, SPH);
-	regw(horz_nr_pixels, NPH);
-	vert_start = image_win->top;
-
-	if (frm_fmt == CCDC_FRMFMT_INTERLACED) {
-		vert_nr_lines = (image_win->height >> 1) - 1;
-		vert_start >>= 1;
-		/* Since first line doesn't have any data */
-		vert_start += 1;
-		/* configure VDINT0 and VDINT1 */
-		regw(vert_start, VDINT0);
-	} else {
-		/* Since first line doesn't have any data */
-		vert_start += 1;
-		vert_nr_lines = image_win->height - 1;
-		/* configure VDINT0 and VDINT1 */
-		mid_img = vert_start + (image_win->height / 2);
-		regw(vert_start, VDINT0);
-		regw(mid_img, VDINT1);
-	}
-	regw(vert_start & CCDC_START_VER_ONE_MASK, SLV0);
-	regw(vert_start & CCDC_START_VER_TWO_MASK, SLV1);
-	regw(vert_nr_lines & CCDC_NUM_LINES_VER, NLV);
-	dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_setwin...");
-}
-
-/* This function will configure CCDC for YCbCr video capture */
-static void ccdc_config_ycbcr(void)
-{
-	struct ccdc_params_ycbcr *params = &ccdc_cfg.ycbcr;
-	u32 temp;
-
-	/* first set the CCDC power on defaults values in all registers */
-	dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_ycbcr...");
-	ccdc_restore_defaults();
-
-	/* configure pixel format & video frame format */
-	temp = (((params->pix_fmt & CCDC_INPUT_MODE_MASK) <<
-		CCDC_INPUT_MODE_SHIFT) |
-		((params->frm_fmt & CCDC_FRM_FMT_MASK) <<
-		CCDC_FRM_FMT_SHIFT));
-
-	/* setup BT.656 sync mode */
-	if (params->bt656_enable) {
-		regw(CCDC_REC656IF_BT656_EN, REC656IF);
-		/*
-		 * configure the FID, VD, HD pin polarity fld,hd pol positive,
-		 * vd negative, 8-bit pack mode
-		 */
-		temp |= CCDC_VD_POL_NEGATIVE;
-	} else {		/* y/c external sync mode */
-		temp |= (((params->fid_pol & CCDC_FID_POL_MASK) <<
-			CCDC_FID_POL_SHIFT) |
-			((params->hd_pol & CCDC_HD_POL_MASK) <<
-			CCDC_HD_POL_SHIFT) |
-			((params->vd_pol & CCDC_VD_POL_MASK) <<
-			CCDC_VD_POL_SHIFT));
-	}
-
-	/* pack the data to 8-bit */
-	temp |= CCDC_DATA_PACK_ENABLE;
-
-	regw(temp, MODESET);
-
-	/* configure video window */
-	ccdc_setwin(&params->win, params->frm_fmt, 2);
-
-	/* configure the order of y cb cr in SD-RAM */
-	temp = (params->pix_order << CCDC_Y8POS_SHIFT);
-	temp |= CCDC_LATCH_ON_VSYNC_DISABLE | CCDC_CCDCFG_FIDMD_NO_LATCH_VSYNC;
-	regw(temp, CCDCFG);
-
-	/*
-	 * configure the horizontal line offset. This is done by rounding up
-	 * width to a multiple of 16 pixels and multiply by two to account for
-	 * y:cb:cr 4:2:2 data
-	 */
-	regw(((params->win.width * 2 + 31) >> 5), HSIZE);
-
-	/* configure the memory line offset */
-	if (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED) {
-		/* two fields are interleaved in memory */
-		regw(CCDC_SDOFST_FIELD_INTERLEAVED, SDOFST);
-	}
-
-	dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_config_ycbcr...\n");
-}
-
-/*
- * ccdc_config_black_clamp()
- * configure parameters for Optical Black Clamp
- */
-static void ccdc_config_black_clamp(struct ccdc_black_clamp *bclamp)
-{
-	u32 val;
-
-	if (!bclamp->b_clamp_enable) {
-		/* configure DCSub */
-		regw(bclamp->dc_sub & CCDC_BLK_DC_SUB_MASK, DCSUB);
-		regw(0x0000, CLAMP);
-		return;
-	}
-	/* Enable the Black clamping, set sample lines and pixels */
-	val = (bclamp->start_pixel & CCDC_BLK_ST_PXL_MASK) |
-	      ((bclamp->sample_pixel & CCDC_BLK_SAMPLE_LN_MASK) <<
-		CCDC_BLK_SAMPLE_LN_SHIFT) | CCDC_BLK_CLAMP_ENABLE;
-	regw(val, CLAMP);
-
-	/* If Black clamping is enable then make dcsub 0 */
-	val = (bclamp->sample_ln & CCDC_NUM_LINE_CALC_MASK)
-			<< CCDC_NUM_LINE_CALC_SHIFT;
-	regw(val, DCSUB);
-}
-
-/*
- * ccdc_config_black_compense()
- * configure parameters for Black Compensation
- */
-static void ccdc_config_black_compense(struct ccdc_black_compensation *bcomp)
-{
-	u32 val;
-
-	val = (bcomp->b & CCDC_BLK_COMP_MASK) |
-		((bcomp->gb & CCDC_BLK_COMP_MASK) <<
-		CCDC_BLK_COMP_GB_COMP_SHIFT);
-	regw(val, BLKCMP1);
-
-	val = ((bcomp->gr & CCDC_BLK_COMP_MASK) <<
-		CCDC_BLK_COMP_GR_COMP_SHIFT) |
-		((bcomp->r & CCDC_BLK_COMP_MASK) <<
-		CCDC_BLK_COMP_R_COMP_SHIFT);
-	regw(val, BLKCMP0);
-}
-
-/*
- * ccdc_write_dfc_entry()
- * write an entry in the dfc table.
- */
-static int ccdc_write_dfc_entry(int index, struct ccdc_vertical_dft *dfc)
-{
-/* TODO This is to be re-visited and adjusted */
-#define DFC_WRITE_WAIT_COUNT	1000
-	u32 val, count = DFC_WRITE_WAIT_COUNT;
-
-	regw(dfc->dft_corr_vert[index], DFCMEM0);
-	regw(dfc->dft_corr_horz[index], DFCMEM1);
-	regw(dfc->dft_corr_sub1[index], DFCMEM2);
-	regw(dfc->dft_corr_sub2[index], DFCMEM3);
-	regw(dfc->dft_corr_sub3[index], DFCMEM4);
-	/* set WR bit to write */
-	val = regr(DFCMEMCTL) | CCDC_DFCMEMCTL_DFCMWR_MASK;
-	regw(val, DFCMEMCTL);
-
-	/*
-	 * Assume, it is very short. If we get an error, we need to
-	 * adjust this value
-	 */
-	while (regr(DFCMEMCTL) & CCDC_DFCMEMCTL_DFCMWR_MASK)
-		count--;
-	/*
-	 * TODO We expect the count to be non-zero to be successful. Adjust
-	 * the count if write requires more time
-	 */
-
-	if (count) {
-		dev_err(ccdc_cfg.dev, "defect table write timeout !!!\n");
-		return -1;
-	}
-	return 0;
-}
-
-/*
- * ccdc_config_vdfc()
- * configure parameters for Vertical Defect Correction
- */
-static int ccdc_config_vdfc(struct ccdc_vertical_dft *dfc)
-{
-	u32 val;
-	int i;
-
-	/* Configure General Defect Correction. The table used is from IPIPE */
-	val = dfc->gen_dft_en & CCDC_DFCCTL_GDFCEN_MASK;
-
-	/* Configure Vertical Defect Correction if needed */
-	if (!dfc->ver_dft_en) {
-		/* Enable only General Defect Correction */
-		regw(val, DFCCTL);
-		return 0;
-	}
-
-	if (dfc->table_size > CCDC_DFT_TABLE_SIZE)
-		return -EINVAL;
-
-	val |= CCDC_DFCCTL_VDFC_DISABLE;
-	val |= (dfc->dft_corr_ctl.vdfcsl & CCDC_DFCCTL_VDFCSL_MASK) <<
-		CCDC_DFCCTL_VDFCSL_SHIFT;
-	val |= (dfc->dft_corr_ctl.vdfcuda & CCDC_DFCCTL_VDFCUDA_MASK) <<
-		CCDC_DFCCTL_VDFCUDA_SHIFT;
-	val |= (dfc->dft_corr_ctl.vdflsft & CCDC_DFCCTL_VDFLSFT_MASK) <<
-		CCDC_DFCCTL_VDFLSFT_SHIFT;
-	regw(val , DFCCTL);
-
-	/* clear address ptr to offset 0 */
-	val = CCDC_DFCMEMCTL_DFCMARST_MASK << CCDC_DFCMEMCTL_DFCMARST_SHIFT;
-
-	/* write defect table entries */
-	for (i = 0; i < dfc->table_size; i++) {
-		/* increment address for non zero index */
-		if (i != 0)
-			val = CCDC_DFCMEMCTL_INC_ADDR;
-		regw(val, DFCMEMCTL);
-		if (ccdc_write_dfc_entry(i, dfc) < 0)
-			return -EFAULT;
-	}
-
-	/* update saturation level and enable dfc */
-	regw(dfc->saturation_ctl & CCDC_VDC_DFCVSAT_MASK, DFCVSAT);
-	val = regr(DFCCTL) | (CCDC_DFCCTL_VDFCEN_MASK <<
-			CCDC_DFCCTL_VDFCEN_SHIFT);
-	regw(val, DFCCTL);
-	return 0;
-}
-
-/*
- * ccdc_config_csc()
- * configure parameters for color space conversion
- * Each register CSCM0-7 has two values in S8Q5 format.
- */
-static void ccdc_config_csc(struct ccdc_csc *csc)
-{
-	u32 val1 = 0, val2;
-	int i;
-
-	if (!csc->enable)
-		return;
-
-	/* Enable the CSC sub-module */
-	regw(CCDC_CSC_ENABLE, CSCCTL);
-
-	/* Converting the co-eff as per the format of the register */
-	for (i = 0; i < CCDC_CSC_COEFF_TABLE_SIZE; i++) {
-		if ((i % 2) == 0) {
-			/* CSCM - LSB */
-			val1 = (csc->coeff[i].integer &
-				CCDC_CSC_COEF_INTEG_MASK)
-				<< CCDC_CSC_COEF_INTEG_SHIFT;
-			/*
-			 * convert decimal part to binary. Use 2 decimal
-			 * precision, user values range from .00 - 0.99
-			 */
-			val1 |= (((csc->coeff[i].decimal &
-				CCDC_CSC_COEF_DECIMAL_MASK) *
-				CCDC_CSC_DEC_MAX) / 100);
-		} else {
-
-			/* CSCM - MSB */
-			val2 = (csc->coeff[i].integer &
-				CCDC_CSC_COEF_INTEG_MASK)
-				<< CCDC_CSC_COEF_INTEG_SHIFT;
-			val2 |= (((csc->coeff[i].decimal &
-				 CCDC_CSC_COEF_DECIMAL_MASK) *
-				 CCDC_CSC_DEC_MAX) / 100);
-			val2 <<= CCDC_CSCM_MSB_SHIFT;
-			val2 |= val1;
-			regw(val2, (CSCM0 + ((i - 1) << 1)));
-		}
-	}
-}
-
-/*
- * ccdc_config_color_patterns()
- * configure parameters for color patterns
- */
-static void ccdc_config_color_patterns(struct ccdc_col_pat *pat0,
-				       struct ccdc_col_pat *pat1)
-{
-	u32 val;
-
-	val = (pat0->olop | (pat0->olep << 2) | (pat0->elop << 4) |
-		(pat0->elep << 6) | (pat1->olop << 8) | (pat1->olep << 10) |
-		(pat1->elop << 12) | (pat1->elep << 14));
-	regw(val, COLPTN);
-}
-
-/* This function will configure CCDC for Raw mode image capture */
-static int ccdc_config_raw(void)
-{
-	struct ccdc_params_raw *params = &ccdc_cfg.bayer;
-	struct ccdc_config_params_raw *config_params =
-					&ccdc_cfg.bayer.config_params;
-	unsigned int val;
-
-	dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_raw...");
-
-	/* restore power on defaults to register */
-	ccdc_restore_defaults();
-
-	/* CCDCFG register:
-	 * set CCD Not to swap input since input is RAW data
-	 * set FID detection function to Latch at V-Sync
-	 * set WENLOG - ccdc valid area to AND
-	 * set TRGSEL to WENBIT
-	 * set EXTRG to DISABLE
-	 * disable latching function on VSYNC - shadowed registers
-	 */
-	regw(CCDC_YCINSWP_RAW | CCDC_CCDCFG_FIDMD_LATCH_VSYNC |
-	     CCDC_CCDCFG_WENLOG_AND | CCDC_CCDCFG_TRGSEL_WEN |
-	     CCDC_CCDCFG_EXTRG_DISABLE | CCDC_LATCH_ON_VSYNC_DISABLE, CCDCFG);
-
-	/*
-	 * Set VDHD direction to input,  input type to raw input
-	 * normal data polarity, do not use external WEN
-	 */
-	val = (CCDC_VDHDOUT_INPUT | CCDC_RAW_IP_MODE | CCDC_DATAPOL_NORMAL |
-		CCDC_EXWEN_DISABLE);
-
-	/*
-	 * Configure the vertical sync polarity (MODESET.VDPOL), horizontal
-	 * sync polarity (MODESET.HDPOL), field id polarity (MODESET.FLDPOL),
-	 * frame format(progressive or interlace), & pixel format (Input mode)
-	 */
-	val |= (((params->vd_pol & CCDC_VD_POL_MASK) << CCDC_VD_POL_SHIFT) |
-		((params->hd_pol & CCDC_HD_POL_MASK) << CCDC_HD_POL_SHIFT) |
-		((params->fid_pol & CCDC_FID_POL_MASK) << CCDC_FID_POL_SHIFT) |
-		((params->frm_fmt & CCDC_FRM_FMT_MASK) << CCDC_FRM_FMT_SHIFT) |
-		((params->pix_fmt & CCDC_PIX_FMT_MASK) << CCDC_PIX_FMT_SHIFT));
-
-	/* set pack for alaw compression */
-	if ((config_params->data_sz == CCDC_DATA_8BITS) ||
-	     config_params->alaw.enable)
-		val |= CCDC_DATA_PACK_ENABLE;
-
-	/* Configure for LPF */
-	if (config_params->lpf_enable)
-		val |= (config_params->lpf_enable & CCDC_LPF_MASK) <<
-			CCDC_LPF_SHIFT;
-
-	/* Configure the data shift */
-	val |= (config_params->datasft & CCDC_DATASFT_MASK) <<
-		CCDC_DATASFT_SHIFT;
-	regw(val , MODESET);
-	dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to MODESET...\n", val);
-
-	/* Configure the Median Filter threshold */
-	regw((config_params->med_filt_thres) & CCDC_MED_FILT_THRESH, MEDFILT);
-
-	/* Configure GAMMAWD register. defaur 11-2, and Mosaic cfa pattern */
-	val = CCDC_GAMMA_BITS_11_2 << CCDC_GAMMAWD_INPUT_SHIFT |
-		CCDC_CFA_MOSAIC;
-
-	/* Enable and configure aLaw register if needed */
-	if (config_params->alaw.enable) {
-		val |= (CCDC_ALAW_ENABLE |
-			((config_params->alaw.gamma_wd &
-			CCDC_ALAW_GAMMA_WD_MASK) <<
-			CCDC_GAMMAWD_INPUT_SHIFT));
-	}
-
-	/* Configure Median filter1 & filter2 */
-	val |= ((config_params->mfilt1 << CCDC_MFILT1_SHIFT) |
-		(config_params->mfilt2 << CCDC_MFILT2_SHIFT));
-
-	regw(val, GAMMAWD);
-	dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to GAMMAWD...\n", val);
-
-	/* configure video window */
-	ccdc_setwin(&params->win, params->frm_fmt, 1);
-
-	/* Optical Clamp Averaging */
-	ccdc_config_black_clamp(&config_params->blk_clamp);
-
-	/* Black level compensation */
-	ccdc_config_black_compense(&config_params->blk_comp);
-
-	/* Vertical Defect Correction if needed */
-	if (ccdc_config_vdfc(&config_params->vertical_dft) < 0)
-		return -EFAULT;
-
-	/* color space conversion */
-	ccdc_config_csc(&config_params->csc);
-
-	/* color pattern */
-	ccdc_config_color_patterns(&config_params->col_pat_field0,
-				   &config_params->col_pat_field1);
-
-	/* Configure the Gain  & offset control */
-	ccdc_config_gain_offset();
-
-	dev_dbg(ccdc_cfg.dev, "\nWriting %x to COLPTN...\n", val);
-
-	/* Configure DATAOFST  register */
-	val = (config_params->data_offset.horz_offset & CCDC_DATAOFST_MASK) <<
-		CCDC_DATAOFST_H_SHIFT;
-	val |= (config_params->data_offset.vert_offset & CCDC_DATAOFST_MASK) <<
-		CCDC_DATAOFST_V_SHIFT;
-	regw(val, DATAOFST);
-
-	/* configuring HSIZE register */
-	val = (params->horz_flip_enable & CCDC_HSIZE_FLIP_MASK) <<
-		CCDC_HSIZE_FLIP_SHIFT;
-
-	/* If pack 8 is enable then 1 pixel will take 1 byte */
-	if ((config_params->data_sz == CCDC_DATA_8BITS) ||
-	     config_params->alaw.enable) {
-		val |= (((params->win.width) + 31) >> 5) &
-			CCDC_HSIZE_VAL_MASK;
-
-		/* adjust to multiple of 32 */
-		dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to HSIZE...\n",
-		       (((params->win.width) + 31) >> 5) &
-			CCDC_HSIZE_VAL_MASK);
-	} else {
-		/* else one pixel will take 2 byte */
-		val |= (((params->win.width * 2) + 31) >> 5) &
-			CCDC_HSIZE_VAL_MASK;
-
-		dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to HSIZE...\n",
-		       (((params->win.width * 2) + 31) >> 5) &
-			CCDC_HSIZE_VAL_MASK);
-	}
-	regw(val, HSIZE);
-
-	/* Configure SDOFST register */
-	if (params->frm_fmt == CCDC_FRMFMT_INTERLACED) {
-		if (params->image_invert_enable) {
-			/* For interlace inverse mode */
-			regw(CCDC_SDOFST_INTERLACE_INVERSE, SDOFST);
-			dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n",
-				CCDC_SDOFST_INTERLACE_INVERSE);
-		} else {
-			/* For interlace non inverse mode */
-			regw(CCDC_SDOFST_INTERLACE_NORMAL, SDOFST);
-			dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n",
-				CCDC_SDOFST_INTERLACE_NORMAL);
-		}
-	} else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) {
-		if (params->image_invert_enable) {
-			/* For progessive inverse mode */
-			regw(CCDC_SDOFST_PROGRESSIVE_INVERSE, SDOFST);
-			dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n",
-				CCDC_SDOFST_PROGRESSIVE_INVERSE);
-		} else {
-			/* For progessive non inverse mode */
-			regw(CCDC_SDOFST_PROGRESSIVE_NORMAL, SDOFST);
-			dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n",
-				CCDC_SDOFST_PROGRESSIVE_NORMAL);
-		}
-	}
-	dev_dbg(ccdc_cfg.dev, "\nend of ccdc_config_raw...");
-	return 0;
-}
-
-static int ccdc_configure(void)
-{
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
-		return ccdc_config_raw();
-	else
-		ccdc_config_ycbcr();
-	return 0;
-}
-
-static int ccdc_set_buftype(enum ccdc_buftype buf_type)
-{
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
-		ccdc_cfg.bayer.buf_type = buf_type;
-	else
-		ccdc_cfg.ycbcr.buf_type = buf_type;
-	return 0;
-}
-static enum ccdc_buftype ccdc_get_buftype(void)
-{
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
-		return ccdc_cfg.bayer.buf_type;
-	return ccdc_cfg.ycbcr.buf_type;
-}
-
-static int ccdc_enum_pix(u32 *pix, int i)
-{
-	int ret = -EINVAL;
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER) {
-		if (i < ARRAY_SIZE(ccdc_raw_bayer_pix_formats)) {
-			*pix = ccdc_raw_bayer_pix_formats[i];
-			ret = 0;
-		}
-	} else {
-		if (i < ARRAY_SIZE(ccdc_raw_yuv_pix_formats)) {
-			*pix = ccdc_raw_yuv_pix_formats[i];
-			ret = 0;
-		}
-	}
-	return ret;
-}
-
-static int ccdc_set_pixel_format(u32 pixfmt)
-{
-	struct ccdc_a_law *alaw = &ccdc_cfg.bayer.config_params.alaw;
-
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER) {
-		ccdc_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW;
-		if (pixfmt == V4L2_PIX_FMT_SBGGR8)
-			alaw->enable = 1;
-		else if (pixfmt != V4L2_PIX_FMT_SBGGR16)
-			return -EINVAL;
-	} else {
-		if (pixfmt == V4L2_PIX_FMT_YUYV)
-			ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_YCBYCR;
-		else if (pixfmt == V4L2_PIX_FMT_UYVY)
-			ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
-		else
-			return -EINVAL;
-	}
-	return 0;
-}
-static u32 ccdc_get_pixel_format(void)
-{
-	struct ccdc_a_law *alaw = &ccdc_cfg.bayer.config_params.alaw;
-	u32 pixfmt;
-
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
-		if (alaw->enable)
-			pixfmt = V4L2_PIX_FMT_SBGGR8;
-		else
-			pixfmt = V4L2_PIX_FMT_SBGGR16;
-	else {
-		if (ccdc_cfg.ycbcr.pix_order == CCDC_PIXORDER_YCBYCR)
-			pixfmt = V4L2_PIX_FMT_YUYV;
-		else
-			pixfmt = V4L2_PIX_FMT_UYVY;
-	}
-	return pixfmt;
-}
-static int ccdc_set_image_window(struct v4l2_rect *win)
-{
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
-		ccdc_cfg.bayer.win = *win;
-	else
-		ccdc_cfg.ycbcr.win = *win;
-	return 0;
-}
-
-static void ccdc_get_image_window(struct v4l2_rect *win)
-{
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
-		*win = ccdc_cfg.bayer.win;
-	else
-		*win = ccdc_cfg.ycbcr.win;
-}
-
-static unsigned int ccdc_get_line_length(void)
-{
-	struct ccdc_config_params_raw *config_params =
-				&ccdc_cfg.bayer.config_params;
-	unsigned int len;
-
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER) {
-		if ((config_params->alaw.enable) ||
-		    (config_params->data_sz == CCDC_DATA_8BITS))
-			len = ccdc_cfg.bayer.win.width;
-		else
-			len = ccdc_cfg.bayer.win.width * 2;
-	} else
-		len = ccdc_cfg.ycbcr.win.width * 2;
-	return ALIGN(len, 32);
-}
-
-static int ccdc_set_frame_format(enum ccdc_frmfmt frm_fmt)
-{
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
-		ccdc_cfg.bayer.frm_fmt = frm_fmt;
-	else
-		ccdc_cfg.ycbcr.frm_fmt = frm_fmt;
-	return 0;
-}
-
-static enum ccdc_frmfmt ccdc_get_frame_format(void)
-{
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
-		return ccdc_cfg.bayer.frm_fmt;
-	else
-		return ccdc_cfg.ycbcr.frm_fmt;
-}
-
-static int ccdc_getfid(void)
-{
-	return  (regr(MODESET) >> 15) & 1;
-}
-
-/* misc operations */
-static inline void ccdc_setfbaddr(unsigned long addr)
-{
-	regw((addr >> 21) & 0x007f, STADRH);
-	regw((addr >> 5) & 0x0ffff, STADRL);
-}
-
-static int ccdc_set_hw_if_params(struct vpfe_hw_if_param *params)
-{
-	ccdc_cfg.if_type = params->if_type;
-
-	switch (params->if_type) {
-	case VPFE_BT656:
-	case VPFE_YCBCR_SYNC_16:
-	case VPFE_YCBCR_SYNC_8:
-		ccdc_cfg.ycbcr.vd_pol = params->vdpol;
-		ccdc_cfg.ycbcr.hd_pol = params->hdpol;
-		break;
-	default:
-		/* TODO add support for raw bayer here */
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static const struct ccdc_hw_device ccdc_hw_dev = {
-	.name = "DM355 CCDC",
-	.owner = THIS_MODULE,
-	.hw_ops = {
-		.open = ccdc_open,
-		.close = ccdc_close,
-		.enable = ccdc_enable,
-		.enable_out_to_sdram = ccdc_enable_output_to_sdram,
-		.set_hw_if_params = ccdc_set_hw_if_params,
-		.configure = ccdc_configure,
-		.set_buftype = ccdc_set_buftype,
-		.get_buftype = ccdc_get_buftype,
-		.enum_pix = ccdc_enum_pix,
-		.set_pixel_format = ccdc_set_pixel_format,
-		.get_pixel_format = ccdc_get_pixel_format,
-		.set_frame_format = ccdc_set_frame_format,
-		.get_frame_format = ccdc_get_frame_format,
-		.set_image_window = ccdc_set_image_window,
-		.get_image_window = ccdc_get_image_window,
-		.get_line_length = ccdc_get_line_length,
-		.setfbaddr = ccdc_setfbaddr,
-		.getfid = ccdc_getfid,
-	},
-};
-
-static int dm355_ccdc_probe(struct platform_device *pdev)
-{
-	void (*setup_pinmux)(void);
-	struct resource	*res;
-	int status = 0;
-
-	/*
-	 * first try to register with vpfe. If not correct platform, then we
-	 * don't have to iomap
-	 */
-	status = vpfe_register_ccdc_device(&ccdc_hw_dev);
-	if (status < 0)
-		return status;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		status = -ENODEV;
-		goto fail_nores;
-	}
-
-	res = request_mem_region(res->start, resource_size(res), res->name);
-	if (!res) {
-		status = -EBUSY;
-		goto fail_nores;
-	}
-
-	ccdc_cfg.base_addr = ioremap(res->start, resource_size(res));
-	if (!ccdc_cfg.base_addr) {
-		status = -ENOMEM;
-		goto fail_nomem;
-	}
-
-	/* Platform data holds setup_pinmux function ptr */
-	if (NULL == pdev->dev.platform_data) {
-		status = -ENODEV;
-		goto fail_nomap;
-	}
-	setup_pinmux = pdev->dev.platform_data;
-	/*
-	 * setup Mux configuration for ccdc which may be different for
-	 * different SoCs using this CCDC
-	 */
-	setup_pinmux();
-	ccdc_cfg.dev = &pdev->dev;
-	printk(KERN_NOTICE "%s is registered with vpfe.\n", ccdc_hw_dev.name);
-	return 0;
-fail_nomap:
-	iounmap(ccdc_cfg.base_addr);
-fail_nomem:
-	release_mem_region(res->start, resource_size(res));
-fail_nores:
-	vpfe_unregister_ccdc_device(&ccdc_hw_dev);
-	return status;
-}
-
-static int dm355_ccdc_remove(struct platform_device *pdev)
-{
-	struct resource	*res;
-
-	iounmap(ccdc_cfg.base_addr);
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(res->start, resource_size(res));
-	vpfe_unregister_ccdc_device(&ccdc_hw_dev);
-	return 0;
-}
-
-static struct platform_driver dm355_ccdc_driver = {
-	.driver = {
-		.name	= "dm355_ccdc",
-	},
-	.remove = dm355_ccdc_remove,
-	.probe = dm355_ccdc_probe,
-};
-
-module_platform_driver(dm355_ccdc_driver);
diff --git a/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc.h b/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc.h
deleted file mode 100644
index 1f3d00aa46d1..000000000000
--- a/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc.h
+++ /dev/null
@@ -1,308 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2005-2009 Texas Instruments Inc
- */
-#ifndef _DM355_CCDC_H
-#define _DM355_CCDC_H
-#include <media/davinci/ccdc_types.h>
-#include <media/davinci/vpfe_types.h>
-
-/* enum for No of pixel per line to be avg. in Black Clamping */
-enum ccdc_sample_length {
-	CCDC_SAMPLE_1PIXELS,
-	CCDC_SAMPLE_2PIXELS,
-	CCDC_SAMPLE_4PIXELS,
-	CCDC_SAMPLE_8PIXELS,
-	CCDC_SAMPLE_16PIXELS
-};
-
-/* enum for No of lines in Black Clamping */
-enum ccdc_sample_line {
-	CCDC_SAMPLE_1LINES,
-	CCDC_SAMPLE_2LINES,
-	CCDC_SAMPLE_4LINES,
-	CCDC_SAMPLE_8LINES,
-	CCDC_SAMPLE_16LINES
-};
-
-/* enum for Alaw gamma width */
-enum ccdc_gamma_width {
-	CCDC_GAMMA_BITS_13_4,
-	CCDC_GAMMA_BITS_12_3,
-	CCDC_GAMMA_BITS_11_2,
-	CCDC_GAMMA_BITS_10_1,
-	CCDC_GAMMA_BITS_09_0
-};
-
-enum ccdc_colpats {
-	CCDC_RED,
-	CCDC_GREEN_RED,
-	CCDC_GREEN_BLUE,
-	CCDC_BLUE
-};
-
-struct ccdc_col_pat {
-	enum ccdc_colpats olop;
-	enum ccdc_colpats olep;
-	enum ccdc_colpats elop;
-	enum ccdc_colpats elep;
-};
-
-enum ccdc_datasft {
-	CCDC_DATA_NO_SHIFT,
-	CCDC_DATA_SHIFT_1BIT,
-	CCDC_DATA_SHIFT_2BIT,
-	CCDC_DATA_SHIFT_3BIT,
-	CCDC_DATA_SHIFT_4BIT,
-	CCDC_DATA_SHIFT_5BIT,
-	CCDC_DATA_SHIFT_6BIT
-};
-
-enum ccdc_data_size {
-	CCDC_DATA_16BITS,
-	CCDC_DATA_15BITS,
-	CCDC_DATA_14BITS,
-	CCDC_DATA_13BITS,
-	CCDC_DATA_12BITS,
-	CCDC_DATA_11BITS,
-	CCDC_DATA_10BITS,
-	CCDC_DATA_8BITS
-};
-enum ccdc_mfilt1 {
-	CCDC_NO_MEDIAN_FILTER1,
-	CCDC_AVERAGE_FILTER1,
-	CCDC_MEDIAN_FILTER1
-};
-
-enum ccdc_mfilt2 {
-	CCDC_NO_MEDIAN_FILTER2,
-	CCDC_AVERAGE_FILTER2,
-	CCDC_MEDIAN_FILTER2
-};
-
-/* structure for ALaw */
-struct ccdc_a_law {
-	/* Enable/disable A-Law */
-	unsigned char enable;
-	/* Gamma Width Input */
-	enum ccdc_gamma_width gamma_wd;
-};
-
-/* structure for Black Clamping */
-struct ccdc_black_clamp {
-	/* only if bClampEnable is TRUE */
-	unsigned char b_clamp_enable;
-	/* only if bClampEnable is TRUE */
-	enum ccdc_sample_length sample_pixel;
-	/* only if bClampEnable is TRUE */
-	enum ccdc_sample_line sample_ln;
-	/* only if bClampEnable is TRUE */
-	unsigned short start_pixel;
-	/* only if bClampEnable is FALSE */
-	unsigned short sgain;
-	unsigned short dc_sub;
-};
-
-/* structure for Black Level Compensation */
-struct ccdc_black_compensation {
-	/* Constant value to subtract from Red component */
-	unsigned char r;
-	/* Constant value to subtract from Gr component */
-	unsigned char gr;
-	/* Constant value to subtract from Blue component */
-	unsigned char b;
-	/* Constant value to subtract from Gb component */
-	unsigned char gb;
-};
-
-struct ccdc_float {
-	int integer;
-	unsigned int decimal;
-};
-
-#define CCDC_CSC_COEFF_TABLE_SIZE	16
-/* structure for color space converter */
-struct ccdc_csc {
-	unsigned char enable;
-	/*
-	 * S8Q5. Use 2 decimal precision, user values range from -3.00 to 3.99.
-	 * example - to use 1.03, set integer part as 1, and decimal part as 3
-	 * to use -1.03, set integer part as -1 and decimal part as 3
-	 */
-	struct ccdc_float coeff[CCDC_CSC_COEFF_TABLE_SIZE];
-};
-
-/* Structures for Vertical Defect Correction*/
-enum ccdc_vdf_csl {
-	CCDC_VDF_NORMAL,
-	CCDC_VDF_HORZ_INTERPOL_SAT,
-	CCDC_VDF_HORZ_INTERPOL
-};
-
-enum ccdc_vdf_cuda {
-	CCDC_VDF_WHOLE_LINE_CORRECT,
-	CCDC_VDF_UPPER_DISABLE
-};
-
-enum ccdc_dfc_mwr {
-	CCDC_DFC_MWR_WRITE_COMPLETE,
-	CCDC_DFC_WRITE_REG
-};
-
-enum ccdc_dfc_mrd {
-	CCDC_DFC_READ_COMPLETE,
-	CCDC_DFC_READ_REG
-};
-
-enum ccdc_dfc_ma_rst {
-	CCDC_DFC_INCR_ADDR,
-	CCDC_DFC_CLR_ADDR
-};
-
-enum ccdc_dfc_mclr {
-	CCDC_DFC_CLEAR_COMPLETE,
-	CCDC_DFC_CLEAR
-};
-
-struct ccdc_dft_corr_ctl {
-	enum ccdc_vdf_csl vdfcsl;
-	enum ccdc_vdf_cuda vdfcuda;
-	unsigned int vdflsft;
-};
-
-struct ccdc_dft_corr_mem_ctl {
-	enum ccdc_dfc_mwr dfcmwr;
-	enum ccdc_dfc_mrd dfcmrd;
-	enum ccdc_dfc_ma_rst dfcmarst;
-	enum ccdc_dfc_mclr dfcmclr;
-};
-
-#define CCDC_DFT_TABLE_SIZE	16
-/*
- * Main Structure for vertical defect correction. Vertical defect
- * correction can correct up to 16 defects if defects less than 16
- * then pad the rest with 0
- */
-struct ccdc_vertical_dft {
-	unsigned char ver_dft_en;
-	unsigned char gen_dft_en;
-	unsigned int saturation_ctl;
-	struct ccdc_dft_corr_ctl dft_corr_ctl;
-	struct ccdc_dft_corr_mem_ctl dft_corr_mem_ctl;
-	int table_size;
-	unsigned int dft_corr_horz[CCDC_DFT_TABLE_SIZE];
-	unsigned int dft_corr_vert[CCDC_DFT_TABLE_SIZE];
-	unsigned int dft_corr_sub1[CCDC_DFT_TABLE_SIZE];
-	unsigned int dft_corr_sub2[CCDC_DFT_TABLE_SIZE];
-	unsigned int dft_corr_sub3[CCDC_DFT_TABLE_SIZE];
-};
-
-struct ccdc_data_offset {
-	unsigned char horz_offset;
-	unsigned char vert_offset;
-};
-
-/*
- * Structure for CCDC configuration parameters for raw capture mode passed
- * by application
- */
-struct ccdc_config_params_raw {
-	/* data shift to be applied before storing */
-	enum ccdc_datasft datasft;
-	/* data size value from 8 to 16 bits */
-	enum ccdc_data_size data_sz;
-	/* median filter for sdram */
-	enum ccdc_mfilt1 mfilt1;
-	enum ccdc_mfilt2 mfilt2;
-	/* low pass filter enable/disable */
-	unsigned char lpf_enable;
-	/* Threshold of median filter */
-	int med_filt_thres;
-	/*
-	 * horz and vertical data offset. Applicable for defect correction
-	 * and lsc
-	 */
-	struct ccdc_data_offset data_offset;
-	/* Structure for Optional A-Law */
-	struct ccdc_a_law alaw;
-	/* Structure for Optical Black Clamp */
-	struct ccdc_black_clamp blk_clamp;
-	/* Structure for Black Compensation */
-	struct ccdc_black_compensation blk_comp;
-	/* structure for vertical Defect Correction Module Configuration */
-	struct ccdc_vertical_dft vertical_dft;
-	/* structure for color space converter Module Configuration */
-	struct ccdc_csc csc;
-	/* color patters for bayer capture */
-	struct ccdc_col_pat col_pat_field0;
-	struct ccdc_col_pat col_pat_field1;
-};
-
-#ifdef __KERNEL__
-#include <linux/io.h>
-
-#define CCDC_WIN_PAL	{0, 0, 720, 576}
-#define CCDC_WIN_VGA	{0, 0, 640, 480}
-
-struct ccdc_params_ycbcr {
-	/* pixel format */
-	enum ccdc_pixfmt pix_fmt;
-	/* progressive or interlaced frame */
-	enum ccdc_frmfmt frm_fmt;
-	/* video window */
-	struct v4l2_rect win;
-	/* field id polarity */
-	enum vpfe_pin_pol fid_pol;
-	/* vertical sync polarity */
-	enum vpfe_pin_pol vd_pol;
-	/* horizontal sync polarity */
-	enum vpfe_pin_pol hd_pol;
-	/* enable BT.656 embedded sync mode */
-	int bt656_enable;
-	/* cb:y:cr:y or y:cb:y:cr in memory */
-	enum ccdc_pixorder pix_order;
-	/* interleaved or separated fields  */
-	enum ccdc_buftype buf_type;
-};
-
-/* Gain applied to Raw Bayer data */
-struct ccdc_gain {
-	unsigned short r_ye;
-	unsigned short gr_cy;
-	unsigned short gb_g;
-	unsigned short b_mg;
-};
-
-/* Structure for CCDC configuration parameters for raw capture mode */
-struct ccdc_params_raw {
-	/* pixel format */
-	enum ccdc_pixfmt pix_fmt;
-	/* progressive or interlaced frame */
-	enum ccdc_frmfmt frm_fmt;
-	/* video window */
-	struct v4l2_rect win;
-	/* field id polarity */
-	enum vpfe_pin_pol fid_pol;
-	/* vertical sync polarity */
-	enum vpfe_pin_pol vd_pol;
-	/* horizontal sync polarity */
-	enum vpfe_pin_pol hd_pol;
-	/* interleaved or separated fields */
-	enum ccdc_buftype buf_type;
-	/* Gain values */
-	struct ccdc_gain gain;
-	/* offset */
-	unsigned int ccdc_offset;
-	/* horizontal flip enable */
-	unsigned char horz_flip_enable;
-	/*
-	 * enable to store the image in inverse order in memory
-	 * (bottom to top)
-	 */
-	unsigned char image_invert_enable;
-	/* Configurable part of raw data */
-	struct ccdc_config_params_raw config_params;
-};
-
-#endif
-#endif				/* DM355_CCDC_H */
diff --git a/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc_regs.h b/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc_regs.h
deleted file mode 100644
index eb381f075245..000000000000
--- a/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc_regs.h
+++ /dev/null
@@ -1,297 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2005-2009 Texas Instruments Inc
- */
-#ifndef _DM355_CCDC_REGS_H
-#define _DM355_CCDC_REGS_H
-
-/**************************************************************************\
-* Register OFFSET Definitions
-\**************************************************************************/
-#define SYNCEN				0x00
-#define MODESET				0x04
-#define HDWIDTH				0x08
-#define VDWIDTH				0x0c
-#define PPLN				0x10
-#define LPFR				0x14
-#define SPH				0x18
-#define NPH				0x1c
-#define SLV0				0x20
-#define SLV1				0x24
-#define NLV				0x28
-#define CULH				0x2c
-#define CULV				0x30
-#define HSIZE				0x34
-#define SDOFST				0x38
-#define STADRH				0x3c
-#define STADRL				0x40
-#define CLAMP				0x44
-#define DCSUB				0x48
-#define COLPTN				0x4c
-#define BLKCMP0				0x50
-#define BLKCMP1				0x54
-#define MEDFILT				0x58
-#define RYEGAIN				0x5c
-#define GRCYGAIN			0x60
-#define GBGGAIN				0x64
-#define BMGGAIN				0x68
-#define OFFSET				0x6c
-#define OUTCLIP				0x70
-#define VDINT0				0x74
-#define VDINT1				0x78
-#define RSV0				0x7c
-#define GAMMAWD				0x80
-#define REC656IF			0x84
-#define CCDCFG				0x88
-#define FMTCFG				0x8c
-#define FMTPLEN				0x90
-#define FMTSPH				0x94
-#define FMTLNH				0x98
-#define FMTSLV				0x9c
-#define FMTLNV				0xa0
-#define FMTRLEN				0xa4
-#define FMTHCNT				0xa8
-#define FMT_ADDR_PTR_B			0xac
-#define FMT_ADDR_PTR(i)			(FMT_ADDR_PTR_B + (i * 4))
-#define FMTPGM_VF0			0xcc
-#define FMTPGM_VF1			0xd0
-#define FMTPGM_AP0			0xd4
-#define FMTPGM_AP1			0xd8
-#define FMTPGM_AP2			0xdc
-#define FMTPGM_AP3                      0xe0
-#define FMTPGM_AP4                      0xe4
-#define FMTPGM_AP5                      0xe8
-#define FMTPGM_AP6                      0xec
-#define FMTPGM_AP7                      0xf0
-#define LSCCFG1                         0xf4
-#define LSCCFG2                         0xf8
-#define LSCH0                           0xfc
-#define LSCV0                           0x100
-#define LSCKH                           0x104
-#define LSCKV                           0x108
-#define LSCMEMCTL                       0x10c
-#define LSCMEMD                         0x110
-#define LSCMEMQ                         0x114
-#define DFCCTL                          0x118
-#define DFCVSAT                         0x11c
-#define DFCMEMCTL                       0x120
-#define DFCMEM0                         0x124
-#define DFCMEM1                         0x128
-#define DFCMEM2                         0x12c
-#define DFCMEM3                         0x130
-#define DFCMEM4                         0x134
-#define CSCCTL                          0x138
-#define CSCM0                           0x13c
-#define CSCM1                           0x140
-#define CSCM2                           0x144
-#define CSCM3                           0x148
-#define CSCM4                           0x14c
-#define CSCM5                           0x150
-#define CSCM6                           0x154
-#define CSCM7                           0x158
-#define DATAOFST			0x15c
-#define CCDC_REG_LAST			DATAOFST
-/**************************************************************
-*	Define for various register bit mask and shifts for CCDC
-*
-**************************************************************/
-#define CCDC_RAW_IP_MODE			0
-#define CCDC_VDHDOUT_INPUT			0
-#define CCDC_YCINSWP_RAW			(0 << 4)
-#define CCDC_EXWEN_DISABLE			0
-#define CCDC_DATAPOL_NORMAL			0
-#define CCDC_CCDCFG_FIDMD_LATCH_VSYNC		0
-#define CCDC_CCDCFG_FIDMD_NO_LATCH_VSYNC	(1 << 6)
-#define CCDC_CCDCFG_WENLOG_AND			0
-#define CCDC_CCDCFG_TRGSEL_WEN			0
-#define CCDC_CCDCFG_EXTRG_DISABLE		0
-#define CCDC_CFA_MOSAIC				0
-#define CCDC_Y8POS_SHIFT			11
-
-#define CCDC_VDC_DFCVSAT_MASK			0x3fff
-#define CCDC_DATAOFST_MASK			0x0ff
-#define CCDC_DATAOFST_H_SHIFT			0
-#define CCDC_DATAOFST_V_SHIFT			8
-#define CCDC_GAMMAWD_CFA_MASK			1
-#define CCDC_GAMMAWD_CFA_SHIFT			5
-#define CCDC_GAMMAWD_INPUT_SHIFT		2
-#define CCDC_FID_POL_MASK			1
-#define CCDC_FID_POL_SHIFT			4
-#define CCDC_HD_POL_MASK			1
-#define CCDC_HD_POL_SHIFT			3
-#define CCDC_VD_POL_MASK			1
-#define CCDC_VD_POL_SHIFT			2
-#define CCDC_VD_POL_NEGATIVE			(1 << 2)
-#define CCDC_FRM_FMT_MASK			1
-#define CCDC_FRM_FMT_SHIFT			7
-#define CCDC_DATA_SZ_MASK			7
-#define CCDC_DATA_SZ_SHIFT			8
-#define CCDC_VDHDOUT_MASK			1
-#define CCDC_VDHDOUT_SHIFT			0
-#define CCDC_EXWEN_MASK				1
-#define CCDC_EXWEN_SHIFT			5
-#define CCDC_INPUT_MODE_MASK			3
-#define CCDC_INPUT_MODE_SHIFT			12
-#define CCDC_PIX_FMT_MASK			3
-#define CCDC_PIX_FMT_SHIFT			12
-#define CCDC_DATAPOL_MASK			1
-#define CCDC_DATAPOL_SHIFT			6
-#define CCDC_WEN_ENABLE				(1 << 1)
-#define CCDC_VDHDEN_ENABLE			(1 << 16)
-#define CCDC_LPF_ENABLE				(1 << 14)
-#define CCDC_ALAW_ENABLE			1
-#define CCDC_ALAW_GAMMA_WD_MASK			7
-#define CCDC_REC656IF_BT656_EN			3
-
-#define CCDC_FMTCFG_FMTMODE_MASK		3
-#define CCDC_FMTCFG_FMTMODE_SHIFT		1
-#define CCDC_FMTCFG_LNUM_MASK			3
-#define CCDC_FMTCFG_LNUM_SHIFT			4
-#define CCDC_FMTCFG_ADDRINC_MASK		7
-#define CCDC_FMTCFG_ADDRINC_SHIFT		8
-
-#define CCDC_CCDCFG_FIDMD_SHIFT			6
-#define	CCDC_CCDCFG_WENLOG_SHIFT		8
-#define CCDC_CCDCFG_TRGSEL_SHIFT		9
-#define CCDC_CCDCFG_EXTRG_SHIFT			10
-#define CCDC_CCDCFG_MSBINVI_SHIFT		13
-
-#define CCDC_HSIZE_FLIP_SHIFT			12
-#define CCDC_HSIZE_FLIP_MASK			1
-#define CCDC_HSIZE_VAL_MASK			0xFFF
-#define CCDC_SDOFST_FIELD_INTERLEAVED		0x249
-#define CCDC_SDOFST_INTERLACE_INVERSE		0x4B6D
-#define CCDC_SDOFST_INTERLACE_NORMAL		0x0B6D
-#define CCDC_SDOFST_PROGRESSIVE_INVERSE		0x4000
-#define CCDC_SDOFST_PROGRESSIVE_NORMAL		0
-#define CCDC_START_PX_HOR_MASK			0x7FFF
-#define CCDC_NUM_PX_HOR_MASK			0x7FFF
-#define CCDC_START_VER_ONE_MASK			0x7FFF
-#define CCDC_START_VER_TWO_MASK			0x7FFF
-#define CCDC_NUM_LINES_VER			0x7FFF
-
-#define CCDC_BLK_CLAMP_ENABLE			(1 << 15)
-#define CCDC_BLK_SGAIN_MASK			0x1F
-#define CCDC_BLK_ST_PXL_MASK			0x1FFF
-#define CCDC_BLK_SAMPLE_LN_MASK			3
-#define CCDC_BLK_SAMPLE_LN_SHIFT		13
-
-#define CCDC_NUM_LINE_CALC_MASK			3
-#define CCDC_NUM_LINE_CALC_SHIFT		14
-
-#define CCDC_BLK_DC_SUB_MASK			0x3FFF
-#define CCDC_BLK_COMP_MASK			0xFF
-#define CCDC_BLK_COMP_GB_COMP_SHIFT		8
-#define CCDC_BLK_COMP_GR_COMP_SHIFT		0
-#define CCDC_BLK_COMP_R_COMP_SHIFT		8
-#define CCDC_LATCH_ON_VSYNC_DISABLE		(1 << 15)
-#define CCDC_LATCH_ON_VSYNC_ENABLE		(0 << 15)
-#define CCDC_FPC_ENABLE				(1 << 15)
-#define CCDC_FPC_FPC_NUM_MASK			0x7FFF
-#define CCDC_DATA_PACK_ENABLE			(1 << 11)
-#define CCDC_FMT_HORZ_FMTLNH_MASK		0x1FFF
-#define CCDC_FMT_HORZ_FMTSPH_MASK		0x1FFF
-#define CCDC_FMT_HORZ_FMTSPH_SHIFT		16
-#define CCDC_FMT_VERT_FMTLNV_MASK		0x1FFF
-#define CCDC_FMT_VERT_FMTSLV_MASK		0x1FFF
-#define CCDC_FMT_VERT_FMTSLV_SHIFT		16
-#define CCDC_VP_OUT_VERT_NUM_MASK		0x3FFF
-#define CCDC_VP_OUT_VERT_NUM_SHIFT		17
-#define CCDC_VP_OUT_HORZ_NUM_MASK		0x1FFF
-#define CCDC_VP_OUT_HORZ_NUM_SHIFT		4
-#define CCDC_VP_OUT_HORZ_ST_MASK		0xF
-
-#define CCDC_CSC_COEF_INTEG_MASK		7
-#define CCDC_CSC_COEF_DECIMAL_MASK		0x1f
-#define CCDC_CSC_COEF_INTEG_SHIFT		5
-#define CCDC_CSCM_MSB_SHIFT			8
-#define CCDC_CSC_ENABLE				1
-#define CCDC_CSC_DEC_MAX			32
-
-#define CCDC_MFILT1_SHIFT			10
-#define CCDC_MFILT2_SHIFT			8
-#define CCDC_MED_FILT_THRESH			0x3FFF
-#define CCDC_LPF_MASK				1
-#define CCDC_LPF_SHIFT				14
-#define CCDC_OFFSET_MASK			0x3FF
-#define CCDC_DATASFT_MASK			7
-#define CCDC_DATASFT_SHIFT			8
-
-#define CCDC_DF_ENABLE				1
-
-#define CCDC_FMTPLEN_P0_MASK			0xF
-#define CCDC_FMTPLEN_P1_MASK			0xF
-#define CCDC_FMTPLEN_P2_MASK			7
-#define CCDC_FMTPLEN_P3_MASK			7
-#define CCDC_FMTPLEN_P0_SHIFT			0
-#define CCDC_FMTPLEN_P1_SHIFT			4
-#define CCDC_FMTPLEN_P2_SHIFT			8
-#define CCDC_FMTPLEN_P3_SHIFT			12
-
-#define CCDC_FMTSPH_MASK			0x1FFF
-#define CCDC_FMTLNH_MASK			0x1FFF
-#define CCDC_FMTSLV_MASK			0x1FFF
-#define CCDC_FMTLNV_MASK			0x7FFF
-#define CCDC_FMTRLEN_MASK			0x1FFF
-#define CCDC_FMTHCNT_MASK			0x1FFF
-
-#define CCDC_ADP_INIT_MASK			0x1FFF
-#define CCDC_ADP_LINE_SHIFT			13
-#define CCDC_ADP_LINE_MASK			3
-#define CCDC_FMTPGN_APTR_MASK			7
-
-#define CCDC_DFCCTL_GDFCEN_MASK			1
-#define CCDC_DFCCTL_VDFCEN_MASK			1
-#define CCDC_DFCCTL_VDFC_DISABLE		(0 << 4)
-#define CCDC_DFCCTL_VDFCEN_SHIFT		4
-#define CCDC_DFCCTL_VDFCSL_MASK			3
-#define CCDC_DFCCTL_VDFCSL_SHIFT		5
-#define CCDC_DFCCTL_VDFCUDA_MASK		1
-#define CCDC_DFCCTL_VDFCUDA_SHIFT		7
-#define CCDC_DFCCTL_VDFLSFT_MASK		3
-#define CCDC_DFCCTL_VDFLSFT_SHIFT		8
-#define CCDC_DFCMEMCTL_DFCMARST_MASK		1
-#define CCDC_DFCMEMCTL_DFCMARST_SHIFT		2
-#define CCDC_DFCMEMCTL_DFCMWR_MASK		1
-#define CCDC_DFCMEMCTL_DFCMWR_SHIFT		0
-#define CCDC_DFCMEMCTL_INC_ADDR			(0 << 2)
-
-#define CCDC_LSCCFG_GFTSF_MASK			7
-#define CCDC_LSCCFG_GFTSF_SHIFT			1
-#define CCDC_LSCCFG_GFTINV_MASK			0xf
-#define CCDC_LSCCFG_GFTINV_SHIFT		4
-#define CCDC_LSC_GFTABLE_SEL_MASK		3
-#define CCDC_LSC_GFTABLE_EPEL_SHIFT		8
-#define CCDC_LSC_GFTABLE_OPEL_SHIFT		10
-#define CCDC_LSC_GFTABLE_EPOL_SHIFT		12
-#define CCDC_LSC_GFTABLE_OPOL_SHIFT		14
-#define CCDC_LSC_GFMODE_MASK			3
-#define CCDC_LSC_GFMODE_SHIFT			4
-#define CCDC_LSC_DISABLE			0
-#define CCDC_LSC_ENABLE				1
-#define CCDC_LSC_TABLE1_SLC			0
-#define CCDC_LSC_TABLE2_SLC			1
-#define CCDC_LSC_TABLE3_SLC			2
-#define CCDC_LSC_MEMADDR_RESET			(1 << 2)
-#define CCDC_LSC_MEMADDR_INCR			(0 << 2)
-#define CCDC_LSC_FRAC_MASK_T1			0xFF
-#define CCDC_LSC_INT_MASK			3
-#define CCDC_LSC_FRAC_MASK			0x3FFF
-#define CCDC_LSC_CENTRE_MASK			0x3FFF
-#define CCDC_LSC_COEF_MASK			0xff
-#define CCDC_LSC_COEFL_SHIFT			0
-#define CCDC_LSC_COEFU_SHIFT			8
-#define CCDC_GAIN_MASK				0x7FF
-#define CCDC_SYNCEN_VDHDEN_MASK			(1 << 0)
-#define CCDC_SYNCEN_WEN_MASK			(1 << 1)
-#define CCDC_SYNCEN_WEN_SHIFT			1
-
-/* Power on Defaults in hardware */
-#define MODESET_DEFAULT				0x200
-#define CULH_DEFAULT				0xFFFF
-#define CULV_DEFAULT				0xFF
-#define GAIN_DEFAULT				256
-#define OUTCLIP_DEFAULT				0x3FFF
-#define LSCCFG2_DEFAULT				0xE
-
-#endif
diff --git a/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc.c b/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc.c
deleted file mode 100644
index 4a93e5ad6415..000000000000
--- a/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc.c
+++ /dev/null
@@ -1,879 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2006-2009 Texas Instruments Inc
- *
- * CCDC hardware module for DM6446
- * ------------------------------
- *
- * This module is for configuring CCD controller of DM6446 VPFE to capture
- * Raw yuv or Bayer RGB data from a decoder. CCDC has several modules
- * such as Defect Pixel Correction, Color Space Conversion etc to
- * pre-process the Raw Bayer RGB data, before writing it to SDRAM.
- * This file is named DM644x so that other variants such DM6443
- * may be supported using the same module.
- *
- * TODO: Test Raw bayer parameter settings and bayer capture
- *	 Split module parameter structure to module specific ioctl structs
- *	 investigate if enum used for user space type definition
- *	 to be replaced by #defines or integer
- */
-#include <linux/platform_device.h>
-#include <linux/uaccess.h>
-#include <linux/videodev2.h>
-#include <linux/gfp.h>
-#include <linux/err.h>
-#include <linux/module.h>
-
-#include "dm644x_ccdc.h"
-#include <media/davinci/vpss.h>
-
-#include "dm644x_ccdc_regs.h"
-#include "ccdc_hw_device.h"
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("CCDC Driver for DM6446");
-MODULE_AUTHOR("Texas Instruments");
-
-static struct ccdc_oper_config {
-	struct device *dev;
-	/* CCDC interface type */
-	enum vpfe_hw_if_type if_type;
-	/* Raw Bayer configuration */
-	struct ccdc_params_raw bayer;
-	/* YCbCr configuration */
-	struct ccdc_params_ycbcr ycbcr;
-	/* ccdc base address */
-	void __iomem *base_addr;
-} ccdc_cfg = {
-	/* Raw configurations */
-	.bayer = {
-		.pix_fmt = CCDC_PIXFMT_RAW,
-		.frm_fmt = CCDC_FRMFMT_PROGRESSIVE,
-		.win = CCDC_WIN_VGA,
-		.fid_pol = VPFE_PINPOL_POSITIVE,
-		.vd_pol = VPFE_PINPOL_POSITIVE,
-		.hd_pol = VPFE_PINPOL_POSITIVE,
-		.config_params = {
-			.data_sz = CCDC_DATA_10BITS,
-		},
-	},
-	.ycbcr = {
-		.pix_fmt = CCDC_PIXFMT_YCBCR_8BIT,
-		.frm_fmt = CCDC_FRMFMT_INTERLACED,
-		.win = CCDC_WIN_PAL,
-		.fid_pol = VPFE_PINPOL_POSITIVE,
-		.vd_pol = VPFE_PINPOL_POSITIVE,
-		.hd_pol = VPFE_PINPOL_POSITIVE,
-		.bt656_enable = 1,
-		.pix_order = CCDC_PIXORDER_CBYCRY,
-		.buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED
-	},
-};
-
-#define CCDC_MAX_RAW_YUV_FORMATS	2
-
-/* Raw Bayer formats */
-static u32 ccdc_raw_bayer_pix_formats[] =
-	{V4L2_PIX_FMT_SBGGR8, V4L2_PIX_FMT_SBGGR16};
-
-/* Raw YUV formats */
-static u32 ccdc_raw_yuv_pix_formats[] =
-	{V4L2_PIX_FMT_UYVY, V4L2_PIX_FMT_YUYV};
-
-/* CCDC Save/Restore context */
-static u32 ccdc_ctx[CCDC_REG_END / sizeof(u32)];
-
-/* register access routines */
-static inline u32 regr(u32 offset)
-{
-	return __raw_readl(ccdc_cfg.base_addr + offset);
-}
-
-static inline void regw(u32 val, u32 offset)
-{
-	__raw_writel(val, ccdc_cfg.base_addr + offset);
-}
-
-static void ccdc_enable(int flag)
-{
-	regw(flag, CCDC_PCR);
-}
-
-static void ccdc_enable_vport(int flag)
-{
-	if (flag)
-		/* enable video port */
-		regw(CCDC_ENABLE_VIDEO_PORT, CCDC_FMTCFG);
-	else
-		regw(CCDC_DISABLE_VIDEO_PORT, CCDC_FMTCFG);
-}
-
-/*
- * ccdc_setwin()
- * This function will configure the window size
- * to be capture in CCDC reg
- */
-static void ccdc_setwin(struct v4l2_rect *image_win,
-			enum ccdc_frmfmt frm_fmt,
-			int ppc)
-{
-	int horz_start, horz_nr_pixels;
-	int vert_start, vert_nr_lines;
-	int val = 0, mid_img = 0;
-
-	dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_setwin...");
-	/*
-	 * ppc - per pixel count. indicates how many pixels per cell
-	 * output to SDRAM. example, for ycbcr, it is one y and one c, so 2.
-	 * raw capture this is 1
-	 */
-	horz_start = image_win->left << (ppc - 1);
-	horz_nr_pixels = (image_win->width << (ppc - 1)) - 1;
-	regw((horz_start << CCDC_HORZ_INFO_SPH_SHIFT) | horz_nr_pixels,
-	     CCDC_HORZ_INFO);
-
-	vert_start = image_win->top;
-
-	if (frm_fmt == CCDC_FRMFMT_INTERLACED) {
-		vert_nr_lines = (image_win->height >> 1) - 1;
-		vert_start >>= 1;
-		/* Since first line doesn't have any data */
-		vert_start += 1;
-		/* configure VDINT0 */
-		val = (vert_start << CCDC_VDINT_VDINT0_SHIFT);
-		regw(val, CCDC_VDINT);
-
-	} else {
-		/* Since first line doesn't have any data */
-		vert_start += 1;
-		vert_nr_lines = image_win->height - 1;
-		/*
-		 * configure VDINT0 and VDINT1. VDINT1 will be at half
-		 * of image height
-		 */
-		mid_img = vert_start + (image_win->height / 2);
-		val = (vert_start << CCDC_VDINT_VDINT0_SHIFT) |
-		    (mid_img & CCDC_VDINT_VDINT1_MASK);
-		regw(val, CCDC_VDINT);
-
-	}
-	regw((vert_start << CCDC_VERT_START_SLV0_SHIFT) | vert_start,
-	     CCDC_VERT_START);
-	regw(vert_nr_lines, CCDC_VERT_LINES);
-	dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_setwin...");
-}
-
-static void ccdc_readregs(void)
-{
-	unsigned int val = 0;
-
-	val = regr(CCDC_ALAW);
-	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to ALAW...\n", val);
-	val = regr(CCDC_CLAMP);
-	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to CLAMP...\n", val);
-	val = regr(CCDC_DCSUB);
-	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to DCSUB...\n", val);
-	val = regr(CCDC_BLKCMP);
-	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to BLKCMP...\n", val);
-	val = regr(CCDC_FPC_ADDR);
-	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FPC_ADDR...\n", val);
-	val = regr(CCDC_FPC);
-	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FPC...\n", val);
-	val = regr(CCDC_FMTCFG);
-	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FMTCFG...\n", val);
-	val = regr(CCDC_COLPTN);
-	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to COLPTN...\n", val);
-	val = regr(CCDC_FMT_HORZ);
-	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FMT_HORZ...\n", val);
-	val = regr(CCDC_FMT_VERT);
-	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FMT_VERT...\n", val);
-	val = regr(CCDC_HSIZE_OFF);
-	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to HSIZE_OFF...\n", val);
-	val = regr(CCDC_SDOFST);
-	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to SDOFST...\n", val);
-	val = regr(CCDC_VP_OUT);
-	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to VP_OUT...\n", val);
-	val = regr(CCDC_SYN_MODE);
-	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to SYN_MODE...\n", val);
-	val = regr(CCDC_HORZ_INFO);
-	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to HORZ_INFO...\n", val);
-	val = regr(CCDC_VERT_START);
-	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to VERT_START...\n", val);
-	val = regr(CCDC_VERT_LINES);
-	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to VERT_LINES...\n", val);
-}
-
-static int ccdc_close(struct device *dev)
-{
-	return 0;
-}
-
-/*
- * ccdc_restore_defaults()
- * This function will write defaults to all CCDC registers
- */
-static void ccdc_restore_defaults(void)
-{
-	int i;
-
-	/* disable CCDC */
-	ccdc_enable(0);
-	/* set all registers to default value */
-	for (i = 4; i <= 0x94; i += 4)
-		regw(0,  i);
-	regw(CCDC_NO_CULLING, CCDC_CULLING);
-	regw(CCDC_GAMMA_BITS_11_2, CCDC_ALAW);
-}
-
-static int ccdc_open(struct device *device)
-{
-	ccdc_restore_defaults();
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
-		ccdc_enable_vport(1);
-	return 0;
-}
-
-static void ccdc_sbl_reset(void)
-{
-	vpss_clear_wbl_overflow(VPSS_PCR_CCDC_WBL_O);
-}
-
-/*
- * ccdc_config_ycbcr()
- * This function will configure CCDC for YCbCr video capture
- */
-static void ccdc_config_ycbcr(void)
-{
-	struct ccdc_params_ycbcr *params = &ccdc_cfg.ycbcr;
-	u32 syn_mode;
-
-	dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_ycbcr...");
-	/*
-	 * first restore the CCDC registers to default values
-	 * This is important since we assume default values to be set in
-	 * a lot of registers that we didn't touch
-	 */
-	ccdc_restore_defaults();
-
-	/*
-	 * configure pixel format, frame format, configure video frame
-	 * format, enable output to SDRAM, enable internal timing generator
-	 * and 8bit pack mode
-	 */
-	syn_mode = (((params->pix_fmt & CCDC_SYN_MODE_INPMOD_MASK) <<
-		    CCDC_SYN_MODE_INPMOD_SHIFT) |
-		    ((params->frm_fmt & CCDC_SYN_FLDMODE_MASK) <<
-		    CCDC_SYN_FLDMODE_SHIFT) | CCDC_VDHDEN_ENABLE |
-		    CCDC_WEN_ENABLE | CCDC_DATA_PACK_ENABLE);
-
-	/* setup BT.656 sync mode */
-	if (params->bt656_enable) {
-		regw(CCDC_REC656IF_BT656_EN, CCDC_REC656IF);
-
-		/*
-		 * configure the FID, VD, HD pin polarity,
-		 * fld,hd pol positive, vd negative, 8-bit data
-		 */
-		syn_mode |= CCDC_SYN_MODE_VD_POL_NEGATIVE;
-		if (ccdc_cfg.if_type == VPFE_BT656_10BIT)
-			syn_mode |= CCDC_SYN_MODE_10BITS;
-		else
-			syn_mode |= CCDC_SYN_MODE_8BITS;
-	} else {
-		/* y/c external sync mode */
-		syn_mode |= (((params->fid_pol & CCDC_FID_POL_MASK) <<
-			     CCDC_FID_POL_SHIFT) |
-			     ((params->hd_pol & CCDC_HD_POL_MASK) <<
-			     CCDC_HD_POL_SHIFT) |
-			     ((params->vd_pol & CCDC_VD_POL_MASK) <<
-			     CCDC_VD_POL_SHIFT));
-	}
-	regw(syn_mode, CCDC_SYN_MODE);
-
-	/* configure video window */
-	ccdc_setwin(&params->win, params->frm_fmt, 2);
-
-	/*
-	 * configure the order of y cb cr in SDRAM, and disable latch
-	 * internal register on vsync
-	 */
-	if (ccdc_cfg.if_type == VPFE_BT656_10BIT)
-		regw((params->pix_order << CCDC_CCDCFG_Y8POS_SHIFT) |
-			CCDC_LATCH_ON_VSYNC_DISABLE | CCDC_CCDCFG_BW656_10BIT,
-			CCDC_CCDCFG);
-	else
-		regw((params->pix_order << CCDC_CCDCFG_Y8POS_SHIFT) |
-			CCDC_LATCH_ON_VSYNC_DISABLE, CCDC_CCDCFG);
-
-	/*
-	 * configure the horizontal line offset. This should be a
-	 * on 32 byte boundary. So clear LSB 5 bits
-	 */
-	regw(((params->win.width * 2  + 31) & ~0x1f), CCDC_HSIZE_OFF);
-
-	/* configure the memory line offset */
-	if (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED)
-		/* two fields are interleaved in memory */
-		regw(CCDC_SDOFST_FIELD_INTERLEAVED, CCDC_SDOFST);
-
-	ccdc_sbl_reset();
-	dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_config_ycbcr...\n");
-}
-
-static void ccdc_config_black_clamp(struct ccdc_black_clamp *bclamp)
-{
-	u32 val;
-
-	if (!bclamp->enable) {
-		/* configure DCSub */
-		val = (bclamp->dc_sub) & CCDC_BLK_DC_SUB_MASK;
-		regw(val, CCDC_DCSUB);
-		dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to DCSUB...\n", val);
-		regw(CCDC_CLAMP_DEFAULT_VAL, CCDC_CLAMP);
-		dev_dbg(ccdc_cfg.dev, "\nWriting 0x0000 to CLAMP...\n");
-		return;
-	}
-	/*
-	 * Configure gain,  Start pixel, No of line to be avg,
-	 * No of pixel/line to be avg, & Enable the Black clamping
-	 */
-	val = ((bclamp->sgain & CCDC_BLK_SGAIN_MASK) |
-	       ((bclamp->start_pixel & CCDC_BLK_ST_PXL_MASK) <<
-		CCDC_BLK_ST_PXL_SHIFT) |
-	       ((bclamp->sample_ln & CCDC_BLK_SAMPLE_LINE_MASK) <<
-		CCDC_BLK_SAMPLE_LINE_SHIFT) |
-	       ((bclamp->sample_pixel & CCDC_BLK_SAMPLE_LN_MASK) <<
-		CCDC_BLK_SAMPLE_LN_SHIFT) | CCDC_BLK_CLAMP_ENABLE);
-	regw(val, CCDC_CLAMP);
-	dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to CLAMP...\n", val);
-	/* If Black clamping is enable then make dcsub 0 */
-	regw(CCDC_DCSUB_DEFAULT_VAL, CCDC_DCSUB);
-	dev_dbg(ccdc_cfg.dev, "\nWriting 0x00000000 to DCSUB...\n");
-}
-
-static void ccdc_config_black_compense(struct ccdc_black_compensation *bcomp)
-{
-	u32 val;
-
-	val = ((bcomp->b & CCDC_BLK_COMP_MASK) |
-	      ((bcomp->gb & CCDC_BLK_COMP_MASK) <<
-	       CCDC_BLK_COMP_GB_COMP_SHIFT) |
-	      ((bcomp->gr & CCDC_BLK_COMP_MASK) <<
-	       CCDC_BLK_COMP_GR_COMP_SHIFT) |
-	      ((bcomp->r & CCDC_BLK_COMP_MASK) <<
-	       CCDC_BLK_COMP_R_COMP_SHIFT));
-	regw(val, CCDC_BLKCMP);
-}
-
-/*
- * ccdc_config_raw()
- * This function will configure CCDC for Raw capture mode
- */
-static void ccdc_config_raw(void)
-{
-	struct ccdc_params_raw *params = &ccdc_cfg.bayer;
-	struct ccdc_config_params_raw *config_params =
-				&ccdc_cfg.bayer.config_params;
-	unsigned int syn_mode = 0;
-	unsigned int val;
-
-	dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_raw...");
-
-	/*      Reset CCDC */
-	ccdc_restore_defaults();
-
-	/* Disable latching function registers on VSYNC  */
-	regw(CCDC_LATCH_ON_VSYNC_DISABLE, CCDC_CCDCFG);
-
-	/*
-	 * Configure the vertical sync polarity(SYN_MODE.VDPOL),
-	 * horizontal sync polarity (SYN_MODE.HDPOL), frame id polarity
-	 * (SYN_MODE.FLDPOL), frame format(progressive or interlace),
-	 * data size(SYNMODE.DATSIZ), &pixel format (Input mode), output
-	 * SDRAM, enable internal timing generator
-	 */
-	syn_mode =
-		(((params->vd_pol & CCDC_VD_POL_MASK) << CCDC_VD_POL_SHIFT) |
-		((params->hd_pol & CCDC_HD_POL_MASK) << CCDC_HD_POL_SHIFT) |
-		((params->fid_pol & CCDC_FID_POL_MASK) << CCDC_FID_POL_SHIFT) |
-		((params->frm_fmt & CCDC_FRM_FMT_MASK) << CCDC_FRM_FMT_SHIFT) |
-		((config_params->data_sz & CCDC_DATA_SZ_MASK) <<
-		CCDC_DATA_SZ_SHIFT) |
-		((params->pix_fmt & CCDC_PIX_FMT_MASK) << CCDC_PIX_FMT_SHIFT) |
-		CCDC_WEN_ENABLE | CCDC_VDHDEN_ENABLE);
-
-	/* Enable and configure aLaw register if needed */
-	if (config_params->alaw.enable) {
-		val = ((config_params->alaw.gamma_wd &
-		      CCDC_ALAW_GAMMA_WD_MASK) | CCDC_ALAW_ENABLE);
-		regw(val, CCDC_ALAW);
-		dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to ALAW...\n", val);
-	}
-
-	/* Configure video window */
-	ccdc_setwin(&params->win, params->frm_fmt, CCDC_PPC_RAW);
-
-	/* Configure Black Clamp */
-	ccdc_config_black_clamp(&config_params->blk_clamp);
-
-	/* Configure Black level compensation */
-	ccdc_config_black_compense(&config_params->blk_comp);
-
-	/* If data size is 8 bit then pack the data */
-	if ((config_params->data_sz == CCDC_DATA_8BITS) ||
-	     config_params->alaw.enable)
-		syn_mode |= CCDC_DATA_PACK_ENABLE;
-
-	/* disable video port */
-	val = CCDC_DISABLE_VIDEO_PORT;
-
-	if (config_params->data_sz == CCDC_DATA_8BITS)
-		val |= (CCDC_DATA_10BITS & CCDC_FMTCFG_VPIN_MASK)
-		    << CCDC_FMTCFG_VPIN_SHIFT;
-	else
-		val |= (config_params->data_sz & CCDC_FMTCFG_VPIN_MASK)
-		    << CCDC_FMTCFG_VPIN_SHIFT;
-	/* Write value in FMTCFG */
-	regw(val, CCDC_FMTCFG);
-
-	dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FMTCFG...\n", val);
-	/* Configure the color pattern according to mt9t001 sensor */
-	regw(CCDC_COLPTN_VAL, CCDC_COLPTN);
-
-	dev_dbg(ccdc_cfg.dev, "\nWriting 0xBB11BB11 to COLPTN...\n");
-	/*
-	 * Configure Data formatter(Video port) pixel selection
-	 * (FMT_HORZ, FMT_VERT)
-	 */
-	val = ((params->win.left & CCDC_FMT_HORZ_FMTSPH_MASK) <<
-	      CCDC_FMT_HORZ_FMTSPH_SHIFT) |
-	      (params->win.width & CCDC_FMT_HORZ_FMTLNH_MASK);
-	regw(val, CCDC_FMT_HORZ);
-
-	dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FMT_HORZ...\n", val);
-	val = (params->win.top & CCDC_FMT_VERT_FMTSLV_MASK)
-	    << CCDC_FMT_VERT_FMTSLV_SHIFT;
-	if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE)
-		val |= (params->win.height) & CCDC_FMT_VERT_FMTLNV_MASK;
-	else
-		val |= (params->win.height >> 1) & CCDC_FMT_VERT_FMTLNV_MASK;
-
-	dev_dbg(ccdc_cfg.dev, "\nparams->win.height  0x%x ...\n",
-	       params->win.height);
-	regw(val, CCDC_FMT_VERT);
-
-	dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FMT_VERT...\n", val);
-
-	dev_dbg(ccdc_cfg.dev, "\nbelow regw(val, FMT_VERT)...");
-
-	/*
-	 * Configure Horizontal offset register. If pack 8 is enabled then
-	 * 1 pixel will take 1 byte
-	 */
-	if ((config_params->data_sz == CCDC_DATA_8BITS) ||
-	    config_params->alaw.enable)
-		regw((params->win.width + CCDC_32BYTE_ALIGN_VAL) &
-		    CCDC_HSIZE_OFF_MASK, CCDC_HSIZE_OFF);
-	else
-		/* else one pixel will take 2 byte */
-		regw(((params->win.width * CCDC_TWO_BYTES_PER_PIXEL) +
-		    CCDC_32BYTE_ALIGN_VAL) & CCDC_HSIZE_OFF_MASK,
-		    CCDC_HSIZE_OFF);
-
-	/* Set value for SDOFST */
-	if (params->frm_fmt == CCDC_FRMFMT_INTERLACED) {
-		if (params->image_invert_enable) {
-			/* For intelace inverse mode */
-			regw(CCDC_INTERLACED_IMAGE_INVERT, CCDC_SDOFST);
-			dev_dbg(ccdc_cfg.dev, "\nWriting 0x4B6D to SDOFST..\n");
-		}
-
-		else {
-			/* For intelace non inverse mode */
-			regw(CCDC_INTERLACED_NO_IMAGE_INVERT, CCDC_SDOFST);
-			dev_dbg(ccdc_cfg.dev, "\nWriting 0x0249 to SDOFST..\n");
-		}
-	} else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) {
-		regw(CCDC_PROGRESSIVE_NO_IMAGE_INVERT, CCDC_SDOFST);
-		dev_dbg(ccdc_cfg.dev, "\nWriting 0x0000 to SDOFST...\n");
-	}
-
-	/*
-	 * Configure video port pixel selection (VPOUT)
-	 * Here -1 is to make the height value less than FMT_VERT.FMTLNV
-	 */
-	if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE)
-		val = (((params->win.height - 1) & CCDC_VP_OUT_VERT_NUM_MASK))
-		    << CCDC_VP_OUT_VERT_NUM_SHIFT;
-	else
-		val =
-		    ((((params->win.height >> CCDC_INTERLACED_HEIGHT_SHIFT) -
-		     1) & CCDC_VP_OUT_VERT_NUM_MASK)) <<
-		    CCDC_VP_OUT_VERT_NUM_SHIFT;
-
-	val |= ((((params->win.width))) & CCDC_VP_OUT_HORZ_NUM_MASK)
-	    << CCDC_VP_OUT_HORZ_NUM_SHIFT;
-	val |= (params->win.left) & CCDC_VP_OUT_HORZ_ST_MASK;
-	regw(val, CCDC_VP_OUT);
-
-	dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to VP_OUT...\n", val);
-	regw(syn_mode, CCDC_SYN_MODE);
-	dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to SYN_MODE...\n", syn_mode);
-
-	ccdc_sbl_reset();
-	dev_dbg(ccdc_cfg.dev, "\nend of ccdc_config_raw...");
-	ccdc_readregs();
-}
-
-static int ccdc_configure(void)
-{
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
-		ccdc_config_raw();
-	else
-		ccdc_config_ycbcr();
-	return 0;
-}
-
-static int ccdc_set_buftype(enum ccdc_buftype buf_type)
-{
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
-		ccdc_cfg.bayer.buf_type = buf_type;
-	else
-		ccdc_cfg.ycbcr.buf_type = buf_type;
-	return 0;
-}
-
-static enum ccdc_buftype ccdc_get_buftype(void)
-{
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
-		return ccdc_cfg.bayer.buf_type;
-	return ccdc_cfg.ycbcr.buf_type;
-}
-
-static int ccdc_enum_pix(u32 *pix, int i)
-{
-	int ret = -EINVAL;
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER) {
-		if (i < ARRAY_SIZE(ccdc_raw_bayer_pix_formats)) {
-			*pix = ccdc_raw_bayer_pix_formats[i];
-			ret = 0;
-		}
-	} else {
-		if (i < ARRAY_SIZE(ccdc_raw_yuv_pix_formats)) {
-			*pix = ccdc_raw_yuv_pix_formats[i];
-			ret = 0;
-		}
-	}
-	return ret;
-}
-
-static int ccdc_set_pixel_format(u32 pixfmt)
-{
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER) {
-		ccdc_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW;
-		if (pixfmt == V4L2_PIX_FMT_SBGGR8)
-			ccdc_cfg.bayer.config_params.alaw.enable = 1;
-		else if (pixfmt != V4L2_PIX_FMT_SBGGR16)
-			return -EINVAL;
-	} else {
-		if (pixfmt == V4L2_PIX_FMT_YUYV)
-			ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_YCBYCR;
-		else if (pixfmt == V4L2_PIX_FMT_UYVY)
-			ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
-		else
-			return -EINVAL;
-	}
-	return 0;
-}
-
-static u32 ccdc_get_pixel_format(void)
-{
-	struct ccdc_a_law *alaw = &ccdc_cfg.bayer.config_params.alaw;
-	u32 pixfmt;
-
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
-		if (alaw->enable)
-			pixfmt = V4L2_PIX_FMT_SBGGR8;
-		else
-			pixfmt = V4L2_PIX_FMT_SBGGR16;
-	else {
-		if (ccdc_cfg.ycbcr.pix_order == CCDC_PIXORDER_YCBYCR)
-			pixfmt = V4L2_PIX_FMT_YUYV;
-		else
-			pixfmt = V4L2_PIX_FMT_UYVY;
-	}
-	return pixfmt;
-}
-
-static int ccdc_set_image_window(struct v4l2_rect *win)
-{
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
-		ccdc_cfg.bayer.win = *win;
-	else
-		ccdc_cfg.ycbcr.win = *win;
-	return 0;
-}
-
-static void ccdc_get_image_window(struct v4l2_rect *win)
-{
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
-		*win = ccdc_cfg.bayer.win;
-	else
-		*win = ccdc_cfg.ycbcr.win;
-}
-
-static unsigned int ccdc_get_line_length(void)
-{
-	struct ccdc_config_params_raw *config_params =
-				&ccdc_cfg.bayer.config_params;
-	unsigned int len;
-
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER) {
-		if ((config_params->alaw.enable) ||
-		    (config_params->data_sz == CCDC_DATA_8BITS))
-			len = ccdc_cfg.bayer.win.width;
-		else
-			len = ccdc_cfg.bayer.win.width * 2;
-	} else
-		len = ccdc_cfg.ycbcr.win.width * 2;
-	return ALIGN(len, 32);
-}
-
-static int ccdc_set_frame_format(enum ccdc_frmfmt frm_fmt)
-{
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
-		ccdc_cfg.bayer.frm_fmt = frm_fmt;
-	else
-		ccdc_cfg.ycbcr.frm_fmt = frm_fmt;
-	return 0;
-}
-
-static enum ccdc_frmfmt ccdc_get_frame_format(void)
-{
-	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
-		return ccdc_cfg.bayer.frm_fmt;
-	else
-		return ccdc_cfg.ycbcr.frm_fmt;
-}
-
-static int ccdc_getfid(void)
-{
-	return (regr(CCDC_SYN_MODE) >> 15) & 1;
-}
-
-/* misc operations */
-static inline void ccdc_setfbaddr(unsigned long addr)
-{
-	regw(addr & 0xffffffe0, CCDC_SDR_ADDR);
-}
-
-static int ccdc_set_hw_if_params(struct vpfe_hw_if_param *params)
-{
-	ccdc_cfg.if_type = params->if_type;
-
-	switch (params->if_type) {
-	case VPFE_BT656:
-	case VPFE_YCBCR_SYNC_16:
-	case VPFE_YCBCR_SYNC_8:
-	case VPFE_BT656_10BIT:
-		ccdc_cfg.ycbcr.vd_pol = params->vdpol;
-		ccdc_cfg.ycbcr.hd_pol = params->hdpol;
-		break;
-	default:
-		/* TODO add support for raw bayer here */
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static void ccdc_save_context(void)
-{
-	ccdc_ctx[CCDC_PCR >> 2] = regr(CCDC_PCR);
-	ccdc_ctx[CCDC_SYN_MODE >> 2] = regr(CCDC_SYN_MODE);
-	ccdc_ctx[CCDC_HD_VD_WID >> 2] = regr(CCDC_HD_VD_WID);
-	ccdc_ctx[CCDC_PIX_LINES >> 2] = regr(CCDC_PIX_LINES);
-	ccdc_ctx[CCDC_HORZ_INFO >> 2] = regr(CCDC_HORZ_INFO);
-	ccdc_ctx[CCDC_VERT_START >> 2] = regr(CCDC_VERT_START);
-	ccdc_ctx[CCDC_VERT_LINES >> 2] = regr(CCDC_VERT_LINES);
-	ccdc_ctx[CCDC_CULLING >> 2] = regr(CCDC_CULLING);
-	ccdc_ctx[CCDC_HSIZE_OFF >> 2] = regr(CCDC_HSIZE_OFF);
-	ccdc_ctx[CCDC_SDOFST >> 2] = regr(CCDC_SDOFST);
-	ccdc_ctx[CCDC_SDR_ADDR >> 2] = regr(CCDC_SDR_ADDR);
-	ccdc_ctx[CCDC_CLAMP >> 2] = regr(CCDC_CLAMP);
-	ccdc_ctx[CCDC_DCSUB >> 2] = regr(CCDC_DCSUB);
-	ccdc_ctx[CCDC_COLPTN >> 2] = regr(CCDC_COLPTN);
-	ccdc_ctx[CCDC_BLKCMP >> 2] = regr(CCDC_BLKCMP);
-	ccdc_ctx[CCDC_FPC >> 2] = regr(CCDC_FPC);
-	ccdc_ctx[CCDC_FPC_ADDR >> 2] = regr(CCDC_FPC_ADDR);
-	ccdc_ctx[CCDC_VDINT >> 2] = regr(CCDC_VDINT);
-	ccdc_ctx[CCDC_ALAW >> 2] = regr(CCDC_ALAW);
-	ccdc_ctx[CCDC_REC656IF >> 2] = regr(CCDC_REC656IF);
-	ccdc_ctx[CCDC_CCDCFG >> 2] = regr(CCDC_CCDCFG);
-	ccdc_ctx[CCDC_FMTCFG >> 2] = regr(CCDC_FMTCFG);
-	ccdc_ctx[CCDC_FMT_HORZ >> 2] = regr(CCDC_FMT_HORZ);
-	ccdc_ctx[CCDC_FMT_VERT >> 2] = regr(CCDC_FMT_VERT);
-	ccdc_ctx[CCDC_FMT_ADDR0 >> 2] = regr(CCDC_FMT_ADDR0);
-	ccdc_ctx[CCDC_FMT_ADDR1 >> 2] = regr(CCDC_FMT_ADDR1);
-	ccdc_ctx[CCDC_FMT_ADDR2 >> 2] = regr(CCDC_FMT_ADDR2);
-	ccdc_ctx[CCDC_FMT_ADDR3 >> 2] = regr(CCDC_FMT_ADDR3);
-	ccdc_ctx[CCDC_FMT_ADDR4 >> 2] = regr(CCDC_FMT_ADDR4);
-	ccdc_ctx[CCDC_FMT_ADDR5 >> 2] = regr(CCDC_FMT_ADDR5);
-	ccdc_ctx[CCDC_FMT_ADDR6 >> 2] = regr(CCDC_FMT_ADDR6);
-	ccdc_ctx[CCDC_FMT_ADDR7 >> 2] = regr(CCDC_FMT_ADDR7);
-	ccdc_ctx[CCDC_PRGEVEN_0 >> 2] = regr(CCDC_PRGEVEN_0);
-	ccdc_ctx[CCDC_PRGEVEN_1 >> 2] = regr(CCDC_PRGEVEN_1);
-	ccdc_ctx[CCDC_PRGODD_0 >> 2] = regr(CCDC_PRGODD_0);
-	ccdc_ctx[CCDC_PRGODD_1 >> 2] = regr(CCDC_PRGODD_1);
-	ccdc_ctx[CCDC_VP_OUT >> 2] = regr(CCDC_VP_OUT);
-}
-
-static void ccdc_restore_context(void)
-{
-	regw(ccdc_ctx[CCDC_SYN_MODE >> 2], CCDC_SYN_MODE);
-	regw(ccdc_ctx[CCDC_HD_VD_WID >> 2], CCDC_HD_VD_WID);
-	regw(ccdc_ctx[CCDC_PIX_LINES >> 2], CCDC_PIX_LINES);
-	regw(ccdc_ctx[CCDC_HORZ_INFO >> 2], CCDC_HORZ_INFO);
-	regw(ccdc_ctx[CCDC_VERT_START >> 2], CCDC_VERT_START);
-	regw(ccdc_ctx[CCDC_VERT_LINES >> 2], CCDC_VERT_LINES);
-	regw(ccdc_ctx[CCDC_CULLING >> 2], CCDC_CULLING);
-	regw(ccdc_ctx[CCDC_HSIZE_OFF >> 2], CCDC_HSIZE_OFF);
-	regw(ccdc_ctx[CCDC_SDOFST >> 2], CCDC_SDOFST);
-	regw(ccdc_ctx[CCDC_SDR_ADDR >> 2], CCDC_SDR_ADDR);
-	regw(ccdc_ctx[CCDC_CLAMP >> 2], CCDC_CLAMP);
-	regw(ccdc_ctx[CCDC_DCSUB >> 2], CCDC_DCSUB);
-	regw(ccdc_ctx[CCDC_COLPTN >> 2], CCDC_COLPTN);
-	regw(ccdc_ctx[CCDC_BLKCMP >> 2], CCDC_BLKCMP);
-	regw(ccdc_ctx[CCDC_FPC >> 2], CCDC_FPC);
-	regw(ccdc_ctx[CCDC_FPC_ADDR >> 2], CCDC_FPC_ADDR);
-	regw(ccdc_ctx[CCDC_VDINT >> 2], CCDC_VDINT);
-	regw(ccdc_ctx[CCDC_ALAW >> 2], CCDC_ALAW);
-	regw(ccdc_ctx[CCDC_REC656IF >> 2], CCDC_REC656IF);
-	regw(ccdc_ctx[CCDC_CCDCFG >> 2], CCDC_CCDCFG);
-	regw(ccdc_ctx[CCDC_FMTCFG >> 2], CCDC_FMTCFG);
-	regw(ccdc_ctx[CCDC_FMT_HORZ >> 2], CCDC_FMT_HORZ);
-	regw(ccdc_ctx[CCDC_FMT_VERT >> 2], CCDC_FMT_VERT);
-	regw(ccdc_ctx[CCDC_FMT_ADDR0 >> 2], CCDC_FMT_ADDR0);
-	regw(ccdc_ctx[CCDC_FMT_ADDR1 >> 2], CCDC_FMT_ADDR1);
-	regw(ccdc_ctx[CCDC_FMT_ADDR2 >> 2], CCDC_FMT_ADDR2);
-	regw(ccdc_ctx[CCDC_FMT_ADDR3 >> 2], CCDC_FMT_ADDR3);
-	regw(ccdc_ctx[CCDC_FMT_ADDR4 >> 2], CCDC_FMT_ADDR4);
-	regw(ccdc_ctx[CCDC_FMT_ADDR5 >> 2], CCDC_FMT_ADDR5);
-	regw(ccdc_ctx[CCDC_FMT_ADDR6 >> 2], CCDC_FMT_ADDR6);
-	regw(ccdc_ctx[CCDC_FMT_ADDR7 >> 2], CCDC_FMT_ADDR7);
-	regw(ccdc_ctx[CCDC_PRGEVEN_0 >> 2], CCDC_PRGEVEN_0);
-	regw(ccdc_ctx[CCDC_PRGEVEN_1 >> 2], CCDC_PRGEVEN_1);
-	regw(ccdc_ctx[CCDC_PRGODD_0 >> 2], CCDC_PRGODD_0);
-	regw(ccdc_ctx[CCDC_PRGODD_1 >> 2], CCDC_PRGODD_1);
-	regw(ccdc_ctx[CCDC_VP_OUT >> 2], CCDC_VP_OUT);
-	regw(ccdc_ctx[CCDC_PCR >> 2], CCDC_PCR);
-}
-static const struct ccdc_hw_device ccdc_hw_dev = {
-	.name = "DM6446 CCDC",
-	.owner = THIS_MODULE,
-	.hw_ops = {
-		.open = ccdc_open,
-		.close = ccdc_close,
-		.reset = ccdc_sbl_reset,
-		.enable = ccdc_enable,
-		.set_hw_if_params = ccdc_set_hw_if_params,
-		.configure = ccdc_configure,
-		.set_buftype = ccdc_set_buftype,
-		.get_buftype = ccdc_get_buftype,
-		.enum_pix = ccdc_enum_pix,
-		.set_pixel_format = ccdc_set_pixel_format,
-		.get_pixel_format = ccdc_get_pixel_format,
-		.set_frame_format = ccdc_set_frame_format,
-		.get_frame_format = ccdc_get_frame_format,
-		.set_image_window = ccdc_set_image_window,
-		.get_image_window = ccdc_get_image_window,
-		.get_line_length = ccdc_get_line_length,
-		.setfbaddr = ccdc_setfbaddr,
-		.getfid = ccdc_getfid,
-	},
-};
-
-static int dm644x_ccdc_probe(struct platform_device *pdev)
-{
-	struct resource	*res;
-	int status = 0;
-
-	/*
-	 * first try to register with vpfe. If not correct platform, then we
-	 * don't have to iomap
-	 */
-	status = vpfe_register_ccdc_device(&ccdc_hw_dev);
-	if (status < 0)
-		return status;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		status = -ENODEV;
-		goto fail_nores;
-	}
-
-	res = request_mem_region(res->start, resource_size(res), res->name);
-	if (!res) {
-		status = -EBUSY;
-		goto fail_nores;
-	}
-
-	ccdc_cfg.base_addr = ioremap(res->start, resource_size(res));
-	if (!ccdc_cfg.base_addr) {
-		status = -ENOMEM;
-		goto fail_nomem;
-	}
-
-	ccdc_cfg.dev = &pdev->dev;
-	printk(KERN_NOTICE "%s is registered with vpfe.\n", ccdc_hw_dev.name);
-	return 0;
-fail_nomem:
-	release_mem_region(res->start, resource_size(res));
-fail_nores:
-	vpfe_unregister_ccdc_device(&ccdc_hw_dev);
-	return status;
-}
-
-static int dm644x_ccdc_remove(struct platform_device *pdev)
-{
-	struct resource	*res;
-
-	iounmap(ccdc_cfg.base_addr);
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(res->start, resource_size(res));
-	vpfe_unregister_ccdc_device(&ccdc_hw_dev);
-	return 0;
-}
-
-static int dm644x_ccdc_suspend(struct device *dev)
-{
-	/* Save CCDC context */
-	ccdc_save_context();
-	/* Disable CCDC */
-	ccdc_enable(0);
-
-	return 0;
-}
-
-static int dm644x_ccdc_resume(struct device *dev)
-{
-	/* Restore CCDC context */
-	ccdc_restore_context();
-
-	return 0;
-}
-
-static const struct dev_pm_ops dm644x_ccdc_pm_ops = {
-	.suspend = dm644x_ccdc_suspend,
-	.resume = dm644x_ccdc_resume,
-};
-
-static struct platform_driver dm644x_ccdc_driver = {
-	.driver = {
-		.name	= "dm644x_ccdc",
-		.pm = &dm644x_ccdc_pm_ops,
-	},
-	.remove = dm644x_ccdc_remove,
-	.probe = dm644x_ccdc_probe,
-};
-
-module_platform_driver(dm644x_ccdc_driver);
diff --git a/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc.h b/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc.h
deleted file mode 100644
index c20dba3d76d6..000000000000
--- a/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc.h
+++ /dev/null
@@ -1,171 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2006-2009 Texas Instruments Inc
- */
-#ifndef _DM644X_CCDC_H
-#define _DM644X_CCDC_H
-#include <media/davinci/ccdc_types.h>
-#include <media/davinci/vpfe_types.h>
-
-/* enum for No of pixel per line to be avg. in Black Clamping*/
-enum ccdc_sample_length {
-	CCDC_SAMPLE_1PIXELS,
-	CCDC_SAMPLE_2PIXELS,
-	CCDC_SAMPLE_4PIXELS,
-	CCDC_SAMPLE_8PIXELS,
-	CCDC_SAMPLE_16PIXELS
-};
-
-/* enum for No of lines in Black Clamping */
-enum ccdc_sample_line {
-	CCDC_SAMPLE_1LINES,
-	CCDC_SAMPLE_2LINES,
-	CCDC_SAMPLE_4LINES,
-	CCDC_SAMPLE_8LINES,
-	CCDC_SAMPLE_16LINES
-};
-
-/* enum for Alaw gamma width */
-enum ccdc_gamma_width {
-	CCDC_GAMMA_BITS_15_6,	/* use bits 15-6 for gamma */
-	CCDC_GAMMA_BITS_14_5,
-	CCDC_GAMMA_BITS_13_4,
-	CCDC_GAMMA_BITS_12_3,
-	CCDC_GAMMA_BITS_11_2,
-	CCDC_GAMMA_BITS_10_1,
-	CCDC_GAMMA_BITS_09_0	/* use bits 9-0 for gamma */
-};
-
-/* returns the highest bit used for the gamma */
-static inline u8 ccdc_gamma_width_max_bit(enum ccdc_gamma_width width)
-{
-	return 15 - width;
-}
-
-enum ccdc_data_size {
-	CCDC_DATA_16BITS,
-	CCDC_DATA_15BITS,
-	CCDC_DATA_14BITS,
-	CCDC_DATA_13BITS,
-	CCDC_DATA_12BITS,
-	CCDC_DATA_11BITS,
-	CCDC_DATA_10BITS,
-	CCDC_DATA_8BITS
-};
-
-/* returns the highest bit used for this data size */
-static inline u8 ccdc_data_size_max_bit(enum ccdc_data_size sz)
-{
-	return sz == CCDC_DATA_8BITS ? 7 : 15 - sz;
-}
-
-/* structure for ALaw */
-struct ccdc_a_law {
-	/* Enable/disable A-Law */
-	unsigned char enable;
-	/* Gamma Width Input */
-	enum ccdc_gamma_width gamma_wd;
-};
-
-/* structure for Black Clamping */
-struct ccdc_black_clamp {
-	unsigned char enable;
-	/* only if bClampEnable is TRUE */
-	enum ccdc_sample_length sample_pixel;
-	/* only if bClampEnable is TRUE */
-	enum ccdc_sample_line sample_ln;
-	/* only if bClampEnable is TRUE */
-	unsigned short start_pixel;
-	/* only if bClampEnable is TRUE */
-	unsigned short sgain;
-	/* only if bClampEnable is FALSE */
-	unsigned short dc_sub;
-};
-
-/* structure for Black Level Compensation */
-struct ccdc_black_compensation {
-	/* Constant value to subtract from Red component */
-	char r;
-	/* Constant value to subtract from Gr component */
-	char gr;
-	/* Constant value to subtract from Blue component */
-	char b;
-	/* Constant value to subtract from Gb component */
-	char gb;
-};
-
-/* Structure for CCDC configuration parameters for raw capture mode passed
- * by application
- */
-struct ccdc_config_params_raw {
-	/* data size value from 8 to 16 bits */
-	enum ccdc_data_size data_sz;
-	/* Structure for Optional A-Law */
-	struct ccdc_a_law alaw;
-	/* Structure for Optical Black Clamp */
-	struct ccdc_black_clamp blk_clamp;
-	/* Structure for Black Compensation */
-	struct ccdc_black_compensation blk_comp;
-};
-
-
-#ifdef __KERNEL__
-#include <linux/io.h>
-/* Define to enable/disable video port */
-#define FP_NUM_BYTES		4
-/* Define for extra pixel/line and extra lines/frame */
-#define NUM_EXTRAPIXELS		8
-#define NUM_EXTRALINES		8
-
-/* settings for commonly used video formats */
-#define CCDC_WIN_PAL     {0, 0, 720, 576}
-/* ntsc square pixel */
-#define CCDC_WIN_VGA	{0, 0, (640 + NUM_EXTRAPIXELS), (480 + NUM_EXTRALINES)}
-
-/* Structure for CCDC configuration parameters for raw capture mode */
-struct ccdc_params_raw {
-	/* pixel format */
-	enum ccdc_pixfmt pix_fmt;
-	/* progressive or interlaced frame */
-	enum ccdc_frmfmt frm_fmt;
-	/* video window */
-	struct v4l2_rect win;
-	/* field id polarity */
-	enum vpfe_pin_pol fid_pol;
-	/* vertical sync polarity */
-	enum vpfe_pin_pol vd_pol;
-	/* horizontal sync polarity */
-	enum vpfe_pin_pol hd_pol;
-	/* interleaved or separated fields */
-	enum ccdc_buftype buf_type;
-	/*
-	 * enable to store the image in inverse
-	 * order in memory(bottom to top)
-	 */
-	unsigned char image_invert_enable;
-	/* configurable parameters */
-	struct ccdc_config_params_raw config_params;
-};
-
-struct ccdc_params_ycbcr {
-	/* pixel format */
-	enum ccdc_pixfmt pix_fmt;
-	/* progressive or interlaced frame */
-	enum ccdc_frmfmt frm_fmt;
-	/* video window */
-	struct v4l2_rect win;
-	/* field id polarity */
-	enum vpfe_pin_pol fid_pol;
-	/* vertical sync polarity */
-	enum vpfe_pin_pol vd_pol;
-	/* horizontal sync polarity */
-	enum vpfe_pin_pol hd_pol;
-	/* enable BT.656 embedded sync mode */
-	int bt656_enable;
-	/* cb:y:cr:y or y:cb:y:cr in memory */
-	enum ccdc_pixorder pix_order;
-	/* interleaved or separated fields  */
-	enum ccdc_buftype buf_type;
-};
-#endif
-#endif				/* _DM644X_CCDC_H */
diff --git a/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc_regs.h b/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc_regs.h
deleted file mode 100644
index c4894f6a254e..000000000000
--- a/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc_regs.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2006-2009 Texas Instruments Inc
- */
-#ifndef _DM644X_CCDC_REGS_H
-#define _DM644X_CCDC_REGS_H
-
-/**************************************************************************\
-* Register OFFSET Definitions
-\**************************************************************************/
-#define CCDC_PID				0x0
-#define CCDC_PCR				0x4
-#define CCDC_SYN_MODE				0x8
-#define CCDC_HD_VD_WID				0xc
-#define CCDC_PIX_LINES				0x10
-#define CCDC_HORZ_INFO				0x14
-#define CCDC_VERT_START				0x18
-#define CCDC_VERT_LINES				0x1c
-#define CCDC_CULLING				0x20
-#define CCDC_HSIZE_OFF				0x24
-#define CCDC_SDOFST				0x28
-#define CCDC_SDR_ADDR				0x2c
-#define CCDC_CLAMP				0x30
-#define CCDC_DCSUB				0x34
-#define CCDC_COLPTN				0x38
-#define CCDC_BLKCMP				0x3c
-#define CCDC_FPC				0x40
-#define CCDC_FPC_ADDR				0x44
-#define CCDC_VDINT				0x48
-#define CCDC_ALAW				0x4c
-#define CCDC_REC656IF				0x50
-#define CCDC_CCDCFG				0x54
-#define CCDC_FMTCFG				0x58
-#define CCDC_FMT_HORZ				0x5c
-#define CCDC_FMT_VERT				0x60
-#define CCDC_FMT_ADDR0				0x64
-#define CCDC_FMT_ADDR1				0x68
-#define CCDC_FMT_ADDR2				0x6c
-#define CCDC_FMT_ADDR3				0x70
-#define CCDC_FMT_ADDR4				0x74
-#define CCDC_FMT_ADDR5				0x78
-#define CCDC_FMT_ADDR6				0x7c
-#define CCDC_FMT_ADDR7				0x80
-#define CCDC_PRGEVEN_0				0x84
-#define CCDC_PRGEVEN_1				0x88
-#define CCDC_PRGODD_0				0x8c
-#define CCDC_PRGODD_1				0x90
-#define CCDC_VP_OUT				0x94
-#define CCDC_REG_END				0x98
-
-/***************************************************************
-*	Define for various register bit mask and shifts for CCDC
-****************************************************************/
-#define CCDC_FID_POL_MASK			1
-#define CCDC_FID_POL_SHIFT			4
-#define CCDC_HD_POL_MASK			1
-#define CCDC_HD_POL_SHIFT			3
-#define CCDC_VD_POL_MASK			1
-#define CCDC_VD_POL_SHIFT			2
-#define CCDC_HSIZE_OFF_MASK			0xffffffe0
-#define CCDC_32BYTE_ALIGN_VAL			31
-#define CCDC_FRM_FMT_MASK			0x1
-#define CCDC_FRM_FMT_SHIFT			7
-#define CCDC_DATA_SZ_MASK			7
-#define CCDC_DATA_SZ_SHIFT			8
-#define CCDC_PIX_FMT_MASK			3
-#define CCDC_PIX_FMT_SHIFT			12
-#define CCDC_VP2SDR_DISABLE			0xFFFBFFFF
-#define CCDC_WEN_ENABLE				BIT(17)
-#define CCDC_SDR2RSZ_DISABLE			0xFFF7FFFF
-#define CCDC_VDHDEN_ENABLE			BIT(16)
-#define CCDC_LPF_ENABLE				BIT(14)
-#define CCDC_ALAW_ENABLE			BIT(3)
-#define CCDC_ALAW_GAMMA_WD_MASK			7
-#define CCDC_BLK_CLAMP_ENABLE			BIT(31)
-#define CCDC_BLK_SGAIN_MASK			0x1F
-#define CCDC_BLK_ST_PXL_MASK			0x7FFF
-#define CCDC_BLK_ST_PXL_SHIFT			10
-#define CCDC_BLK_SAMPLE_LN_MASK			7
-#define CCDC_BLK_SAMPLE_LN_SHIFT		28
-#define CCDC_BLK_SAMPLE_LINE_MASK		7
-#define CCDC_BLK_SAMPLE_LINE_SHIFT		25
-#define CCDC_BLK_DC_SUB_MASK			0x03FFF
-#define CCDC_BLK_COMP_MASK			0xFF
-#define CCDC_BLK_COMP_GB_COMP_SHIFT		8
-#define CCDC_BLK_COMP_GR_COMP_SHIFT		16
-#define CCDC_BLK_COMP_R_COMP_SHIFT		24
-#define CCDC_LATCH_ON_VSYNC_DISABLE		BIT(15)
-#define CCDC_FPC_ENABLE				BIT(15)
-#define CCDC_FPC_DISABLE			0
-#define CCDC_FPC_FPC_NUM_MASK			0x7FFF
-#define CCDC_DATA_PACK_ENABLE			BIT(11)
-#define CCDC_FMTCFG_VPIN_MASK			7
-#define CCDC_FMTCFG_VPIN_SHIFT			12
-#define CCDC_FMT_HORZ_FMTLNH_MASK		0x1FFF
-#define CCDC_FMT_HORZ_FMTSPH_MASK		0x1FFF
-#define CCDC_FMT_HORZ_FMTSPH_SHIFT		16
-#define CCDC_FMT_VERT_FMTLNV_MASK		0x1FFF
-#define CCDC_FMT_VERT_FMTSLV_MASK		0x1FFF
-#define CCDC_FMT_VERT_FMTSLV_SHIFT		16
-#define CCDC_VP_OUT_VERT_NUM_MASK		0x3FFF
-#define CCDC_VP_OUT_VERT_NUM_SHIFT		17
-#define CCDC_VP_OUT_HORZ_NUM_MASK		0x1FFF
-#define CCDC_VP_OUT_HORZ_NUM_SHIFT		4
-#define CCDC_VP_OUT_HORZ_ST_MASK		0xF
-#define CCDC_HORZ_INFO_SPH_SHIFT		16
-#define CCDC_VERT_START_SLV0_SHIFT		16
-#define CCDC_VDINT_VDINT0_SHIFT			16
-#define CCDC_VDINT_VDINT1_MASK			0xFFFF
-#define CCDC_PPC_RAW				1
-#define CCDC_DCSUB_DEFAULT_VAL			0
-#define CCDC_CLAMP_DEFAULT_VAL			0
-#define CCDC_ENABLE_VIDEO_PORT			0x8000
-#define CCDC_DISABLE_VIDEO_PORT			0
-#define CCDC_COLPTN_VAL				0xBB11BB11
-#define CCDC_TWO_BYTES_PER_PIXEL		2
-#define CCDC_INTERLACED_IMAGE_INVERT		0x4B6D
-#define CCDC_INTERLACED_NO_IMAGE_INVERT		0x0249
-#define CCDC_PROGRESSIVE_IMAGE_INVERT		0x4000
-#define CCDC_PROGRESSIVE_NO_IMAGE_INVERT	0
-#define CCDC_INTERLACED_HEIGHT_SHIFT		1
-#define CCDC_SYN_MODE_INPMOD_SHIFT		12
-#define CCDC_SYN_MODE_INPMOD_MASK		3
-#define CCDC_SYN_MODE_8BITS			(7 << 8)
-#define CCDC_SYN_MODE_10BITS			(6 << 8)
-#define CCDC_SYN_MODE_11BITS			(5 << 8)
-#define CCDC_SYN_MODE_12BITS			(4 << 8)
-#define CCDC_SYN_MODE_13BITS			(3 << 8)
-#define CCDC_SYN_MODE_14BITS			(2 << 8)
-#define CCDC_SYN_MODE_15BITS			(1 << 8)
-#define CCDC_SYN_MODE_16BITS			(0 << 8)
-#define CCDC_SYN_FLDMODE_MASK			1
-#define CCDC_SYN_FLDMODE_SHIFT			7
-#define CCDC_REC656IF_BT656_EN			3
-#define CCDC_SYN_MODE_VD_POL_NEGATIVE		BIT(2)
-#define CCDC_CCDCFG_Y8POS_SHIFT			11
-#define CCDC_CCDCFG_BW656_10BIT			BIT(5)
-#define CCDC_SDOFST_FIELD_INTERLEAVED		0x249
-#define CCDC_NO_CULLING				0xffff00ff
-#endif
diff --git a/drivers/staging/media/deprecated/vpfe_capture/isif.c b/drivers/staging/media/deprecated/vpfe_capture/isif.c
deleted file mode 100644
index 4059891c2824..000000000000
--- a/drivers/staging/media/deprecated/vpfe_capture/isif.c
+++ /dev/null
@@ -1,1127 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2008-2009 Texas Instruments Inc
- *
- * Image Sensor Interface (ISIF) driver
- *
- * This driver is for configuring the ISIF IP available on DM365 or any other
- * TI SoCs. This is used for capturing yuv or bayer video or image data
- * from a decoder or sensor. This IP is similar to the CCDC IP on DM355
- * and DM6446, but with enhanced or additional ip blocks. The driver
- * configures the ISIF upon commands from the vpfe bridge driver through
- * ccdc_hw_device interface.
- *
- * TODO: 1) Raw bayer parameter settings and bayer capture
- *	 2) Add support for control ioctl
- */
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/uaccess.h>
-#include <linux/io.h>
-#include <linux/videodev2.h>
-#include <linux/err.h>
-#include <linux/module.h>
-
-#include "isif.h"
-#include <media/davinci/vpss.h>
-
-#include "isif_regs.h"
-#include "ccdc_hw_device.h"
-
-/* Defaults for module configuration parameters */
-static const struct isif_config_params_raw isif_config_defaults = {
-	.linearize = {
-		.en = 0,
-		.corr_shft = ISIF_NO_SHIFT,
-		.scale_fact = {1, 0},
-	},
-	.df_csc = {
-		.df_or_csc = 0,
-		.csc = {
-			.en = 0,
-		},
-	},
-	.dfc = {
-		.en = 0,
-	},
-	.bclamp = {
-		.en = 0,
-	},
-	.gain_offset = {
-		.gain = {
-			.r_ye = {1, 0},
-			.gr_cy = {1, 0},
-			.gb_g = {1, 0},
-			.b_mg = {1, 0},
-		},
-	},
-	.culling = {
-		.hcpat_odd = 0xff,
-		.hcpat_even = 0xff,
-		.vcpat = 0xff,
-	},
-	.compress = {
-		.alg = ISIF_ALAW,
-	},
-};
-
-/* ISIF operation configuration */
-static struct isif_oper_config {
-	struct device *dev;
-	enum vpfe_hw_if_type if_type;
-	struct isif_ycbcr_config ycbcr;
-	struct isif_params_raw bayer;
-	enum isif_data_pack data_pack;
-	/* ISIF base address */
-	void __iomem *base_addr;
-	/* ISIF Linear Table 0 */
-	void __iomem *linear_tbl0_addr;
-	/* ISIF Linear Table 1 */
-	void __iomem *linear_tbl1_addr;
-} isif_cfg = {
-	.ycbcr = {
-		.pix_fmt = CCDC_PIXFMT_YCBCR_8BIT,
-		.frm_fmt = CCDC_FRMFMT_INTERLACED,
-		.win = ISIF_WIN_NTSC,
-		.fid_pol = VPFE_PINPOL_POSITIVE,
-		.vd_pol = VPFE_PINPOL_POSITIVE,
-		.hd_pol = VPFE_PINPOL_POSITIVE,
-		.pix_order = CCDC_PIXORDER_CBYCRY,
-		.buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED,
-	},
-	.bayer = {
-		.pix_fmt = CCDC_PIXFMT_RAW,
-		.frm_fmt = CCDC_FRMFMT_PROGRESSIVE,
-		.win = ISIF_WIN_VGA,
-		.fid_pol = VPFE_PINPOL_POSITIVE,
-		.vd_pol = VPFE_PINPOL_POSITIVE,
-		.hd_pol = VPFE_PINPOL_POSITIVE,
-		.gain = {
-			.r_ye = {1, 0},
-			.gr_cy = {1, 0},
-			.gb_g = {1, 0},
-			.b_mg = {1, 0},
-		},
-		.cfa_pat = ISIF_CFA_PAT_MOSAIC,
-		.data_msb = ISIF_BIT_MSB_11,
-		.config_params = {
-			.data_shift = ISIF_NO_SHIFT,
-			.col_pat_field0 = {
-				.olop = ISIF_GREEN_BLUE,
-				.olep = ISIF_BLUE,
-				.elop = ISIF_RED,
-				.elep = ISIF_GREEN_RED,
-			},
-			.col_pat_field1 = {
-				.olop = ISIF_GREEN_BLUE,
-				.olep = ISIF_BLUE,
-				.elop = ISIF_RED,
-				.elep = ISIF_GREEN_RED,
-			},
-			.test_pat_gen = 0,
-		},
-	},
-	.data_pack = ISIF_DATA_PACK8,
-};
-
-/* Raw Bayer formats */
-static const u32 isif_raw_bayer_pix_formats[] = {
-	V4L2_PIX_FMT_SBGGR8, V4L2_PIX_FMT_SBGGR16};
-
-/* Raw YUV formats */
-static const u32 isif_raw_yuv_pix_formats[] = {
-	V4L2_PIX_FMT_UYVY, V4L2_PIX_FMT_YUYV};
-
-/* register access routines */
-static inline u32 regr(u32 offset)
-{
-	return __raw_readl(isif_cfg.base_addr + offset);
-}
-
-static inline void regw(u32 val, u32 offset)
-{
-	__raw_writel(val, isif_cfg.base_addr + offset);
-}
-
-/* reg_modify() - read, modify and write register */
-static inline u32 reg_modify(u32 mask, u32 val, u32 offset)
-{
-	u32 new_val = (regr(offset) & ~mask) | (val & mask);
-
-	regw(new_val, offset);
-	return new_val;
-}
-
-static inline void regw_lin_tbl(u32 val, u32 offset, int i)
-{
-	if (!i)
-		__raw_writel(val, isif_cfg.linear_tbl0_addr + offset);
-	else
-		__raw_writel(val, isif_cfg.linear_tbl1_addr + offset);
-}
-
-static void isif_disable_all_modules(void)
-{
-	/* disable BC */
-	regw(0, CLAMPCFG);
-	/* disable vdfc */
-	regw(0, DFCCTL);
-	/* disable CSC */
-	regw(0, CSCCTL);
-	/* disable linearization */
-	regw(0, LINCFG0);
-	/* disable other modules here as they are supported */
-}
-
-static void isif_enable(int en)
-{
-	if (!en) {
-		/* Before disable isif, disable all ISIF modules */
-		isif_disable_all_modules();
-		/*
-		 * wait for next VD. Assume lowest scan rate is 12 Hz. So
-		 * 100 msec delay is good enough
-		 */
-		msleep(100);
-	}
-	reg_modify(ISIF_SYNCEN_VDHDEN_MASK, en, SYNCEN);
-}
-
-static void isif_enable_output_to_sdram(int en)
-{
-	reg_modify(ISIF_SYNCEN_WEN_MASK, en << ISIF_SYNCEN_WEN_SHIFT, SYNCEN);
-}
-
-static void isif_config_culling(struct isif_cul *cul)
-{
-	u32 val;
-
-	/* Horizontal pattern */
-	val = (cul->hcpat_even << CULL_PAT_EVEN_LINE_SHIFT) | cul->hcpat_odd;
-	regw(val, CULH);
-
-	/* vertical pattern */
-	regw(cul->vcpat, CULV);
-
-	/* LPF */
-	reg_modify(ISIF_LPF_MASK << ISIF_LPF_SHIFT,
-		  cul->en_lpf << ISIF_LPF_SHIFT, MODESET);
-}
-
-static void isif_config_gain_offset(void)
-{
-	struct isif_gain_offsets_adj *gain_off_p =
-		&isif_cfg.bayer.config_params.gain_offset;
-	u32 val;
-
-	val = (!!gain_off_p->gain_sdram_en << GAIN_SDRAM_EN_SHIFT) |
-	      (!!gain_off_p->gain_ipipe_en << GAIN_IPIPE_EN_SHIFT) |
-	      (!!gain_off_p->gain_h3a_en << GAIN_H3A_EN_SHIFT) |
-	      (!!gain_off_p->offset_sdram_en << OFST_SDRAM_EN_SHIFT) |
-	      (!!gain_off_p->offset_ipipe_en << OFST_IPIPE_EN_SHIFT) |
-	      (!!gain_off_p->offset_h3a_en << OFST_H3A_EN_SHIFT);
-
-	reg_modify(GAIN_OFFSET_EN_MASK, val, CGAMMAWD);
-
-	val = (gain_off_p->gain.r_ye.integer << GAIN_INTEGER_SHIFT) |
-	       gain_off_p->gain.r_ye.decimal;
-	regw(val, CRGAIN);
-
-	val = (gain_off_p->gain.gr_cy.integer << GAIN_INTEGER_SHIFT) |
-	       gain_off_p->gain.gr_cy.decimal;
-	regw(val, CGRGAIN);
-
-	val = (gain_off_p->gain.gb_g.integer << GAIN_INTEGER_SHIFT) |
-	       gain_off_p->gain.gb_g.decimal;
-	regw(val, CGBGAIN);
-
-	val = (gain_off_p->gain.b_mg.integer << GAIN_INTEGER_SHIFT) |
-	       gain_off_p->gain.b_mg.decimal;
-	regw(val, CBGAIN);
-
-	regw(gain_off_p->offset, COFSTA);
-}
-
-static void isif_restore_defaults(void)
-{
-	enum vpss_ccdc_source_sel source = VPSS_CCDCIN;
-
-	dev_dbg(isif_cfg.dev, "\nstarting isif_restore_defaults...");
-	isif_cfg.bayer.config_params = isif_config_defaults;
-	/* Enable clock to ISIF, IPIPEIF and BL */
-	vpss_enable_clock(VPSS_CCDC_CLOCK, 1);
-	vpss_enable_clock(VPSS_IPIPEIF_CLOCK, 1);
-	vpss_enable_clock(VPSS_BL_CLOCK, 1);
-	/* Set default offset and gain */
-	isif_config_gain_offset();
-	vpss_select_ccdc_source(source);
-	dev_dbg(isif_cfg.dev, "\nEnd of isif_restore_defaults...");
-}
-
-static int isif_open(struct device *device)
-{
-	isif_restore_defaults();
-	return 0;
-}
-
-/* This function will configure the window size to be capture in ISIF reg */
-static void isif_setwin(struct v4l2_rect *image_win,
-			enum ccdc_frmfmt frm_fmt, int ppc)
-{
-	int horz_start, horz_nr_pixels;
-	int vert_start, vert_nr_lines;
-	int mid_img = 0;
-
-	dev_dbg(isif_cfg.dev, "\nStarting isif_setwin...");
-	/*
-	 * ppc - per pixel count. indicates how many pixels per cell
-	 * output to SDRAM. example, for ycbcr, it is one y and one c, so 2.
-	 * raw capture this is 1
-	 */
-	horz_start = image_win->left << (ppc - 1);
-	horz_nr_pixels = ((image_win->width) << (ppc - 1)) - 1;
-
-	/* Writing the horizontal info into the registers */
-	regw(horz_start & START_PX_HOR_MASK, SPH);
-	regw(horz_nr_pixels & NUM_PX_HOR_MASK, LNH);
-	vert_start = image_win->top;
-
-	if (frm_fmt == CCDC_FRMFMT_INTERLACED) {
-		vert_nr_lines = (image_win->height >> 1) - 1;
-		vert_start >>= 1;
-		/* To account for VD since line 0 doesn't have any data */
-		vert_start += 1;
-	} else {
-		/* To account for VD since line 0 doesn't have any data */
-		vert_start += 1;
-		vert_nr_lines = image_win->height - 1;
-		/* configure VDINT0 and VDINT1 */
-		mid_img = vert_start + (image_win->height / 2);
-		regw(mid_img, VDINT1);
-	}
-
-	regw(0, VDINT0);
-	regw(vert_start & START_VER_ONE_MASK, SLV0);
-	regw(vert_start & START_VER_TWO_MASK, SLV1);
-	regw(vert_nr_lines & NUM_LINES_VER, LNV);
-}
-
-static void isif_config_bclamp(struct isif_black_clamp *bc)
-{
-	u32 val;
-
-	/*
-	 * DC Offset is always added to image data irrespective of bc enable
-	 * status
-	 */
-	regw(bc->dc_offset, CLDCOFST);
-
-	if (bc->en) {
-		val = bc->bc_mode_color << ISIF_BC_MODE_COLOR_SHIFT;
-
-		/* Enable BC and horizontal clamp calculation parameters */
-		val = val | 1 | (bc->horz.mode << ISIF_HORZ_BC_MODE_SHIFT);
-
-		regw(val, CLAMPCFG);
-
-		if (bc->horz.mode != ISIF_HORZ_BC_DISABLE) {
-			/*
-			 * Window count for calculation
-			 * Base window selection
-			 * pixel limit
-			 * Horizontal size of window
-			 * vertical size of the window
-			 * Horizontal start position of the window
-			 * Vertical start position of the window
-			 */
-			val = bc->horz.win_count_calc |
-			      ((!!bc->horz.base_win_sel_calc) <<
-				ISIF_HORZ_BC_WIN_SEL_SHIFT) |
-			      ((!!bc->horz.clamp_pix_limit) <<
-				ISIF_HORZ_BC_PIX_LIMIT_SHIFT) |
-			      (bc->horz.win_h_sz_calc <<
-				ISIF_HORZ_BC_WIN_H_SIZE_SHIFT) |
-			      (bc->horz.win_v_sz_calc <<
-				ISIF_HORZ_BC_WIN_V_SIZE_SHIFT);
-			regw(val, CLHWIN0);
-
-			regw(bc->horz.win_start_h_calc, CLHWIN1);
-			regw(bc->horz.win_start_v_calc, CLHWIN2);
-		}
-
-		/* vertical clamp calculation parameters */
-
-		/* Reset clamp value sel for previous line */
-		val |=
-		(bc->vert.reset_val_sel << ISIF_VERT_BC_RST_VAL_SEL_SHIFT) |
-		(bc->vert.line_ave_coef << ISIF_VERT_BC_LINE_AVE_COEF_SHIFT);
-		regw(val, CLVWIN0);
-
-		/* Optical Black horizontal start position */
-		regw(bc->vert.ob_start_h, CLVWIN1);
-		/* Optical Black vertical start position */
-		regw(bc->vert.ob_start_v, CLVWIN2);
-		/* Optical Black vertical size for calculation */
-		regw(bc->vert.ob_v_sz_calc, CLVWIN3);
-		/* Vertical start position for BC subtraction */
-		regw(bc->vert_start_sub, CLSV);
-	}
-}
-
-static void isif_config_linearization(struct isif_linearize *linearize)
-{
-	u32 val, i;
-
-	if (!linearize->en) {
-		regw(0, LINCFG0);
-		return;
-	}
-
-	/* shift value for correction & enable linearization (set lsb) */
-	val = (linearize->corr_shft << ISIF_LIN_CORRSFT_SHIFT) | 1;
-	regw(val, LINCFG0);
-
-	/* Scale factor */
-	val = ((!!linearize->scale_fact.integer) <<
-	       ISIF_LIN_SCALE_FACT_INTEG_SHIFT) |
-	       linearize->scale_fact.decimal;
-	regw(val, LINCFG1);
-
-	for (i = 0; i < ISIF_LINEAR_TAB_SIZE; i++) {
-		if (i % 2)
-			regw_lin_tbl(linearize->table[i], ((i >> 1) << 2), 1);
-		else
-			regw_lin_tbl(linearize->table[i], ((i >> 1) << 2), 0);
-	}
-}
-
-static int isif_config_dfc(struct isif_dfc *vdfc)
-{
-	/* initialize retries to loop for max ~ 250 usec */
-	u32 val, count, retries = loops_per_jiffy / (4000/HZ);
-	int i;
-
-	if (!vdfc->en)
-		return 0;
-
-	/* Correction mode */
-	val = (vdfc->corr_mode << ISIF_VDFC_CORR_MOD_SHIFT);
-
-	/* Correct whole line or partial */
-	if (vdfc->corr_whole_line)
-		val |= 1 << ISIF_VDFC_CORR_WHOLE_LN_SHIFT;
-
-	/* level shift value */
-	val |= vdfc->def_level_shift << ISIF_VDFC_LEVEL_SHFT_SHIFT;
-
-	regw(val, DFCCTL);
-
-	/* Defect saturation level */
-	regw(vdfc->def_sat_level, VDFSATLV);
-
-	regw(vdfc->table[0].pos_vert, DFCMEM0);
-	regw(vdfc->table[0].pos_horz, DFCMEM1);
-	if (vdfc->corr_mode == ISIF_VDFC_NORMAL ||
-	    vdfc->corr_mode == ISIF_VDFC_HORZ_INTERPOL_IF_SAT) {
-		regw(vdfc->table[0].level_at_pos, DFCMEM2);
-		regw(vdfc->table[0].level_up_pixels, DFCMEM3);
-		regw(vdfc->table[0].level_low_pixels, DFCMEM4);
-	}
-
-	/* set DFCMARST and set DFCMWR */
-	val = regr(DFCMEMCTL) | (1 << ISIF_DFCMEMCTL_DFCMARST_SHIFT) | 1;
-	regw(val, DFCMEMCTL);
-
-	count = retries;
-	while (count && (regr(DFCMEMCTL) & 0x1))
-		count--;
-
-	if (!count) {
-		dev_dbg(isif_cfg.dev, "defect table write timeout !!!\n");
-		return -1;
-	}
-
-	for (i = 1; i < vdfc->num_vdefects; i++) {
-		regw(vdfc->table[i].pos_vert, DFCMEM0);
-		regw(vdfc->table[i].pos_horz, DFCMEM1);
-		if (vdfc->corr_mode == ISIF_VDFC_NORMAL ||
-		    vdfc->corr_mode == ISIF_VDFC_HORZ_INTERPOL_IF_SAT) {
-			regw(vdfc->table[i].level_at_pos, DFCMEM2);
-			regw(vdfc->table[i].level_up_pixels, DFCMEM3);
-			regw(vdfc->table[i].level_low_pixels, DFCMEM4);
-		}
-		val = regr(DFCMEMCTL);
-		/* clear DFCMARST and set DFCMWR */
-		val &= ~BIT(ISIF_DFCMEMCTL_DFCMARST_SHIFT);
-		val |= 1;
-		regw(val, DFCMEMCTL);
-
-		count = retries;
-		while (count && (regr(DFCMEMCTL) & 0x1))
-			count--;
-
-		if (!count) {
-			dev_err(isif_cfg.dev,
-				"defect table write timeout !!!\n");
-			return -1;
-		}
-	}
-	if (vdfc->num_vdefects < ISIF_VDFC_TABLE_SIZE) {
-		/* Extra cycle needed */
-		regw(0, DFCMEM0);
-		regw(0x1FFF, DFCMEM1);
-		regw(1, DFCMEMCTL);
-	}
-
-	/* enable VDFC */
-	reg_modify((1 << ISIF_VDFC_EN_SHIFT), (1 << ISIF_VDFC_EN_SHIFT),
-		   DFCCTL);
-	return 0;
-}
-
-static void isif_config_csc(struct isif_df_csc *df_csc)
-{
-	u32 val1 = 0, val2 = 0, i;
-
-	if (!df_csc->csc.en) {
-		regw(0, CSCCTL);
-		return;
-	}
-	for (i = 0; i < ISIF_CSC_NUM_COEFF; i++) {
-		if ((i % 2) == 0) {
-			/* CSCM - LSB */
-			val1 = (df_csc->csc.coeff[i].integer <<
-				ISIF_CSC_COEF_INTEG_SHIFT) |
-				df_csc->csc.coeff[i].decimal;
-		} else {
-
-			/* CSCM - MSB */
-			val2 = (df_csc->csc.coeff[i].integer <<
-				ISIF_CSC_COEF_INTEG_SHIFT) |
-				df_csc->csc.coeff[i].decimal;
-			val2 <<= ISIF_CSCM_MSB_SHIFT;
-			val2 |= val1;
-			regw(val2, (CSCM0 + ((i - 1) << 1)));
-		}
-	}
-
-	/* program the active area */
-	regw(df_csc->start_pix, FMTSPH);
-	/*
-	 * one extra pixel as required for CSC. Actually number of
-	 * pixel - 1 should be configured in this register. So we
-	 * need to subtract 1 before writing to FMTSPH, but we will
-	 * not do this since csc requires one extra pixel
-	 */
-	regw(df_csc->num_pixels, FMTLNH);
-	regw(df_csc->start_line, FMTSLV);
-	/*
-	 * one extra line as required for CSC. See reason documented for
-	 * num_pixels
-	 */
-	regw(df_csc->num_lines, FMTLNV);
-
-	/* Enable CSC */
-	regw(1, CSCCTL);
-}
-
-static int isif_config_raw(void)
-{
-	struct isif_params_raw *params = &isif_cfg.bayer;
-	struct isif_config_params_raw *module_params =
-		&isif_cfg.bayer.config_params;
-	struct vpss_pg_frame_size frame_size;
-	struct vpss_sync_pol sync;
-	u32 val;
-
-	dev_dbg(isif_cfg.dev, "\nStarting isif_config_raw..\n");
-
-	/*
-	 * Configure CCDCFG register:-
-	 * Set CCD Not to swap input since input is RAW data
-	 * Set FID detection function to Latch at V-Sync
-	 * Set WENLOG - isif valid area
-	 * Set TRGSEL
-	 * Set EXTRG
-	 * Packed to 8 or 16 bits
-	 */
-
-	val = ISIF_YCINSWP_RAW | ISIF_CCDCFG_FIDMD_LATCH_VSYNC |
-		ISIF_CCDCFG_WENLOG_AND | ISIF_CCDCFG_TRGSEL_WEN |
-		ISIF_CCDCFG_EXTRG_DISABLE | isif_cfg.data_pack;
-
-	dev_dbg(isif_cfg.dev, "Writing 0x%x to ...CCDCFG \n", val);
-	regw(val, CCDCFG);
-
-	/*
-	 * Configure the vertical sync polarity(MODESET.VDPOL)
-	 * Configure the horizontal sync polarity (MODESET.HDPOL)
-	 * Configure frame id polarity (MODESET.FLDPOL)
-	 * Configure data polarity
-	 * Configure External WEN Selection
-	 * Configure frame format(progressive or interlace)
-	 * Configure pixel format (Input mode)
-	 * Configure the data shift
-	 */
-
-	val = ISIF_VDHDOUT_INPUT | (params->vd_pol << ISIF_VD_POL_SHIFT) |
-		(params->hd_pol << ISIF_HD_POL_SHIFT) |
-		(params->fid_pol << ISIF_FID_POL_SHIFT) |
-		(ISIF_DATAPOL_NORMAL << ISIF_DATAPOL_SHIFT) |
-		(ISIF_EXWEN_DISABLE << ISIF_EXWEN_SHIFT) |
-		(params->frm_fmt << ISIF_FRM_FMT_SHIFT) |
-		(params->pix_fmt << ISIF_INPUT_SHIFT) |
-		(params->config_params.data_shift << ISIF_DATASFT_SHIFT);
-
-	regw(val, MODESET);
-	dev_dbg(isif_cfg.dev, "Writing 0x%x to MODESET...\n", val);
-
-	/*
-	 * Configure GAMMAWD register
-	 * CFA pattern setting
-	 */
-	val = params->cfa_pat << ISIF_GAMMAWD_CFA_SHIFT;
-
-	/* Gamma msb */
-	if (module_params->compress.alg == ISIF_ALAW)
-		val |= ISIF_ALAW_ENABLE;
-
-	val |= (params->data_msb << ISIF_ALAW_GAMMA_WD_SHIFT);
-	regw(val, CGAMMAWD);
-
-	/* Configure DPCM compression settings */
-	if (module_params->compress.alg == ISIF_DPCM) {
-		val =  BIT(ISIF_DPCM_EN_SHIFT) |
-		       (module_params->compress.pred <<
-		       ISIF_DPCM_PREDICTOR_SHIFT);
-	}
-
-	regw(val, MISC);
-
-	/* Configure Gain & Offset */
-	isif_config_gain_offset();
-
-	/* Configure Color pattern */
-	val = (params->config_params.col_pat_field0.olop) |
-	      (params->config_params.col_pat_field0.olep << 2) |
-	      (params->config_params.col_pat_field0.elop << 4) |
-	      (params->config_params.col_pat_field0.elep << 6) |
-	      (params->config_params.col_pat_field1.olop << 8) |
-	      (params->config_params.col_pat_field1.olep << 10) |
-	      (params->config_params.col_pat_field1.elop << 12) |
-	      (params->config_params.col_pat_field1.elep << 14);
-	regw(val, CCOLP);
-	dev_dbg(isif_cfg.dev, "Writing %x to CCOLP ...\n", val);
-
-	/* Configure HSIZE register  */
-	val = (!!params->horz_flip_en) << ISIF_HSIZE_FLIP_SHIFT;
-
-	/* calculate line offset in 32 bytes based on pack value */
-	if (isif_cfg.data_pack == ISIF_PACK_8BIT)
-		val |= ((params->win.width + 31) >> 5);
-	else if (isif_cfg.data_pack == ISIF_PACK_12BIT)
-		val |= (((params->win.width +
-		       (params->win.width >> 2)) + 31) >> 5);
-	else
-		val |= (((params->win.width * 2) + 31) >> 5);
-	regw(val, HSIZE);
-
-	/* Configure SDOFST register  */
-	if (params->frm_fmt == CCDC_FRMFMT_INTERLACED) {
-		if (params->image_invert_en) {
-			/* For interlace inverse mode */
-			regw(0x4B6D, SDOFST);
-			dev_dbg(isif_cfg.dev, "Writing 0x4B6D to SDOFST...\n");
-		} else {
-			/* For interlace non inverse mode */
-			regw(0x0B6D, SDOFST);
-			dev_dbg(isif_cfg.dev, "Writing 0x0B6D to SDOFST...\n");
-		}
-	} else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) {
-		if (params->image_invert_en) {
-			/* For progressive inverse mode */
-			regw(0x4000, SDOFST);
-			dev_dbg(isif_cfg.dev, "Writing 0x4000 to SDOFST...\n");
-		} else {
-			/* For progressive non inverse mode */
-			regw(0x0000, SDOFST);
-			dev_dbg(isif_cfg.dev, "Writing 0x0000 to SDOFST...\n");
-		}
-	}
-
-	/* Configure video window */
-	isif_setwin(&params->win, params->frm_fmt, 1);
-
-	/* Configure Black Clamp */
-	isif_config_bclamp(&module_params->bclamp);
-
-	/* Configure Vertical Defection Pixel Correction */
-	if (isif_config_dfc(&module_params->dfc) < 0)
-		return -EFAULT;
-
-	if (!module_params->df_csc.df_or_csc)
-		/* Configure Color Space Conversion */
-		isif_config_csc(&module_params->df_csc);
-
-	isif_config_linearization(&module_params->linearize);
-
-	/* Configure Culling */
-	isif_config_culling(&module_params->culling);
-
-	/* Configure horizontal and vertical offsets(DFC,LSC,Gain) */
-	regw(module_params->horz_offset, DATAHOFST);
-	regw(module_params->vert_offset, DATAVOFST);
-
-	/* Setup test pattern if enabled */
-	if (params->config_params.test_pat_gen) {
-		/* Use the HD/VD pol settings from user */
-		sync.ccdpg_hdpol = params->hd_pol;
-		sync.ccdpg_vdpol = params->vd_pol;
-		dm365_vpss_set_sync_pol(sync);
-		frame_size.hlpfr = isif_cfg.bayer.win.width;
-		frame_size.pplen = isif_cfg.bayer.win.height;
-		dm365_vpss_set_pg_frame_size(frame_size);
-		vpss_select_ccdc_source(VPSS_PGLPBK);
-	}
-
-	dev_dbg(isif_cfg.dev, "\nEnd of isif_config_ycbcr...\n");
-	return 0;
-}
-
-static int isif_set_buftype(enum ccdc_buftype buf_type)
-{
-	if (isif_cfg.if_type == VPFE_RAW_BAYER)
-		isif_cfg.bayer.buf_type = buf_type;
-	else
-		isif_cfg.ycbcr.buf_type = buf_type;
-
-	return 0;
-
-}
-static enum ccdc_buftype isif_get_buftype(void)
-{
-	if (isif_cfg.if_type == VPFE_RAW_BAYER)
-		return isif_cfg.bayer.buf_type;
-
-	return isif_cfg.ycbcr.buf_type;
-}
-
-static int isif_enum_pix(u32 *pix, int i)
-{
-	int ret = -EINVAL;
-
-	if (isif_cfg.if_type == VPFE_RAW_BAYER) {
-		if (i < ARRAY_SIZE(isif_raw_bayer_pix_formats)) {
-			*pix = isif_raw_bayer_pix_formats[i];
-			ret = 0;
-		}
-	} else {
-		if (i < ARRAY_SIZE(isif_raw_yuv_pix_formats)) {
-			*pix = isif_raw_yuv_pix_formats[i];
-			ret = 0;
-		}
-	}
-
-	return ret;
-}
-
-static int isif_set_pixel_format(unsigned int pixfmt)
-{
-	if (isif_cfg.if_type == VPFE_RAW_BAYER) {
-		if (pixfmt == V4L2_PIX_FMT_SBGGR8) {
-			if ((isif_cfg.bayer.config_params.compress.alg !=
-			     ISIF_ALAW) &&
-			    (isif_cfg.bayer.config_params.compress.alg !=
-			     ISIF_DPCM)) {
-				dev_dbg(isif_cfg.dev,
-					"Either configure A-Law or DPCM\n");
-				return -EINVAL;
-			}
-			isif_cfg.data_pack = ISIF_PACK_8BIT;
-		} else if (pixfmt == V4L2_PIX_FMT_SBGGR16) {
-			isif_cfg.bayer.config_params.compress.alg =
-					ISIF_NO_COMPRESSION;
-			isif_cfg.data_pack = ISIF_PACK_16BIT;
-		} else
-			return -EINVAL;
-		isif_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW;
-	} else {
-		if (pixfmt == V4L2_PIX_FMT_YUYV)
-			isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_YCBYCR;
-		else if (pixfmt == V4L2_PIX_FMT_UYVY)
-			isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
-		else
-			return -EINVAL;
-		isif_cfg.data_pack = ISIF_PACK_8BIT;
-	}
-	return 0;
-}
-
-static u32 isif_get_pixel_format(void)
-{
-	u32 pixfmt;
-
-	if (isif_cfg.if_type == VPFE_RAW_BAYER)
-		if (isif_cfg.bayer.config_params.compress.alg == ISIF_ALAW ||
-		    isif_cfg.bayer.config_params.compress.alg == ISIF_DPCM)
-			pixfmt = V4L2_PIX_FMT_SBGGR8;
-		else
-			pixfmt = V4L2_PIX_FMT_SBGGR16;
-	else {
-		if (isif_cfg.ycbcr.pix_order == CCDC_PIXORDER_YCBYCR)
-			pixfmt = V4L2_PIX_FMT_YUYV;
-		else
-			pixfmt = V4L2_PIX_FMT_UYVY;
-	}
-	return pixfmt;
-}
-
-static int isif_set_image_window(struct v4l2_rect *win)
-{
-	if (isif_cfg.if_type == VPFE_RAW_BAYER) {
-		isif_cfg.bayer.win.top = win->top;
-		isif_cfg.bayer.win.left = win->left;
-		isif_cfg.bayer.win.width = win->width;
-		isif_cfg.bayer.win.height = win->height;
-	} else {
-		isif_cfg.ycbcr.win.top = win->top;
-		isif_cfg.ycbcr.win.left = win->left;
-		isif_cfg.ycbcr.win.width = win->width;
-		isif_cfg.ycbcr.win.height = win->height;
-	}
-	return 0;
-}
-
-static void isif_get_image_window(struct v4l2_rect *win)
-{
-	if (isif_cfg.if_type == VPFE_RAW_BAYER)
-		*win = isif_cfg.bayer.win;
-	else
-		*win = isif_cfg.ycbcr.win;
-}
-
-static unsigned int isif_get_line_length(void)
-{
-	unsigned int len;
-
-	if (isif_cfg.if_type == VPFE_RAW_BAYER) {
-		if (isif_cfg.data_pack == ISIF_PACK_8BIT)
-			len = ((isif_cfg.bayer.win.width));
-		else if (isif_cfg.data_pack == ISIF_PACK_12BIT)
-			len = (((isif_cfg.bayer.win.width * 2) +
-				 (isif_cfg.bayer.win.width >> 2)));
-		else
-			len = (((isif_cfg.bayer.win.width * 2)));
-	} else
-		len = (((isif_cfg.ycbcr.win.width * 2)));
-	return ALIGN(len, 32);
-}
-
-static int isif_set_frame_format(enum ccdc_frmfmt frm_fmt)
-{
-	if (isif_cfg.if_type == VPFE_RAW_BAYER)
-		isif_cfg.bayer.frm_fmt = frm_fmt;
-	else
-		isif_cfg.ycbcr.frm_fmt = frm_fmt;
-	return 0;
-}
-static enum ccdc_frmfmt isif_get_frame_format(void)
-{
-	if (isif_cfg.if_type == VPFE_RAW_BAYER)
-		return isif_cfg.bayer.frm_fmt;
-	return isif_cfg.ycbcr.frm_fmt;
-}
-
-static int isif_getfid(void)
-{
-	return (regr(MODESET) >> 15) & 0x1;
-}
-
-/* misc operations */
-static void isif_setfbaddr(unsigned long addr)
-{
-	regw((addr >> 21) & 0x07ff, CADU);
-	regw((addr >> 5) & 0x0ffff, CADL);
-}
-
-static int isif_set_hw_if_params(struct vpfe_hw_if_param *params)
-{
-	isif_cfg.if_type = params->if_type;
-
-	switch (params->if_type) {
-	case VPFE_BT656:
-	case VPFE_BT656_10BIT:
-	case VPFE_YCBCR_SYNC_8:
-		isif_cfg.ycbcr.pix_fmt = CCDC_PIXFMT_YCBCR_8BIT;
-		isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
-		break;
-	case VPFE_BT1120:
-	case VPFE_YCBCR_SYNC_16:
-		isif_cfg.ycbcr.pix_fmt = CCDC_PIXFMT_YCBCR_16BIT;
-		isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
-		break;
-	case VPFE_RAW_BAYER:
-		isif_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW;
-		break;
-	default:
-		dev_dbg(isif_cfg.dev, "Invalid interface type\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-/* This function will configure ISIF for YCbCr parameters. */
-static int isif_config_ycbcr(void)
-{
-	struct isif_ycbcr_config *params = &isif_cfg.ycbcr;
-	u32 modeset = 0, ccdcfg = 0;
-
-	dev_dbg(isif_cfg.dev, "\nStarting isif_config_ycbcr...");
-
-	/* configure pixel format or input mode */
-	modeset = modeset | (params->pix_fmt << ISIF_INPUT_SHIFT) |
-		  (params->frm_fmt << ISIF_FRM_FMT_SHIFT) |
-		  (params->fid_pol << ISIF_FID_POL_SHIFT) |
-		  (params->hd_pol << ISIF_HD_POL_SHIFT) |
-		  (params->vd_pol << ISIF_VD_POL_SHIFT);
-
-	/* pack the data to 8-bit ISIFCFG */
-	switch (isif_cfg.if_type) {
-	case VPFE_BT656:
-		if (params->pix_fmt != CCDC_PIXFMT_YCBCR_8BIT) {
-			dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n");
-			return -EINVAL;
-		}
-		modeset |= (VPFE_PINPOL_NEGATIVE << ISIF_VD_POL_SHIFT);
-		regw(3, REC656IF);
-		ccdcfg = ccdcfg | ISIF_DATA_PACK8 | ISIF_YCINSWP_YCBCR;
-		break;
-	case VPFE_BT656_10BIT:
-		if (params->pix_fmt != CCDC_PIXFMT_YCBCR_8BIT) {
-			dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n");
-			return -EINVAL;
-		}
-		/* setup BT.656, embedded sync  */
-		regw(3, REC656IF);
-		/* enable 10 bit mode in ccdcfg */
-		ccdcfg = ccdcfg | ISIF_DATA_PACK8 | ISIF_YCINSWP_YCBCR |
-			ISIF_BW656_ENABLE;
-		break;
-	case VPFE_BT1120:
-		if (params->pix_fmt != CCDC_PIXFMT_YCBCR_16BIT) {
-			dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n");
-			return -EINVAL;
-		}
-		regw(3, REC656IF);
-		break;
-
-	case VPFE_YCBCR_SYNC_8:
-		ccdcfg |= ISIF_DATA_PACK8;
-		ccdcfg |= ISIF_YCINSWP_YCBCR;
-		if (params->pix_fmt != CCDC_PIXFMT_YCBCR_8BIT) {
-			dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n");
-			return -EINVAL;
-		}
-		break;
-	case VPFE_YCBCR_SYNC_16:
-		if (params->pix_fmt != CCDC_PIXFMT_YCBCR_16BIT) {
-			dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n");
-			return -EINVAL;
-		}
-		break;
-	default:
-		/* should never come here */
-		dev_dbg(isif_cfg.dev, "Invalid interface type\n");
-		return -EINVAL;
-	}
-
-	regw(modeset, MODESET);
-
-	/* Set up pix order */
-	ccdcfg |= params->pix_order << ISIF_PIX_ORDER_SHIFT;
-
-	regw(ccdcfg, CCDCFG);
-
-	/* configure video window */
-	if ((isif_cfg.if_type == VPFE_BT1120) ||
-	    (isif_cfg.if_type == VPFE_YCBCR_SYNC_16))
-		isif_setwin(&params->win, params->frm_fmt, 1);
-	else
-		isif_setwin(&params->win, params->frm_fmt, 2);
-
-	/*
-	 * configure the horizontal line offset
-	 * this is done by rounding up width to a multiple of 16 pixels
-	 * and multiply by two to account for y:cb:cr 4:2:2 data
-	 */
-	regw(((((params->win.width * 2) + 31) & 0xffffffe0) >> 5), HSIZE);
-
-	/* configure the memory line offset */
-	if ((params->frm_fmt == CCDC_FRMFMT_INTERLACED) &&
-	    (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED))
-		/* two fields are interleaved in memory */
-		regw(0x00000249, SDOFST);
-
-	return 0;
-}
-
-static int isif_configure(void)
-{
-	if (isif_cfg.if_type == VPFE_RAW_BAYER)
-		return isif_config_raw();
-	return isif_config_ycbcr();
-}
-
-static int isif_close(struct device *device)
-{
-	/* copy defaults to module params */
-	isif_cfg.bayer.config_params = isif_config_defaults;
-	return 0;
-}
-
-static const struct ccdc_hw_device isif_hw_dev = {
-	.name = "ISIF",
-	.owner = THIS_MODULE,
-	.hw_ops = {
-		.open = isif_open,
-		.close = isif_close,
-		.enable = isif_enable,
-		.enable_out_to_sdram = isif_enable_output_to_sdram,
-		.set_hw_if_params = isif_set_hw_if_params,
-		.configure = isif_configure,
-		.set_buftype = isif_set_buftype,
-		.get_buftype = isif_get_buftype,
-		.enum_pix = isif_enum_pix,
-		.set_pixel_format = isif_set_pixel_format,
-		.get_pixel_format = isif_get_pixel_format,
-		.set_frame_format = isif_set_frame_format,
-		.get_frame_format = isif_get_frame_format,
-		.set_image_window = isif_set_image_window,
-		.get_image_window = isif_get_image_window,
-		.get_line_length = isif_get_line_length,
-		.setfbaddr = isif_setfbaddr,
-		.getfid = isif_getfid,
-	},
-};
-
-static int isif_probe(struct platform_device *pdev)
-{
-	void (*setup_pinmux)(void);
-	struct resource	*res;
-	void __iomem *addr;
-	int status = 0, i;
-
-	/* Platform data holds setup_pinmux function ptr */
-	if (!pdev->dev.platform_data)
-		return -ENODEV;
-
-	/*
-	 * first try to register with vpfe. If not correct platform, then we
-	 * don't have to iomap
-	 */
-	status = vpfe_register_ccdc_device(&isif_hw_dev);
-	if (status < 0)
-		return status;
-
-	setup_pinmux = pdev->dev.platform_data;
-	/*
-	 * setup Mux configuration for ccdc which may be different for
-	 * different SoCs using this CCDC
-	 */
-	setup_pinmux();
-
-	i = 0;
-	/* Get the ISIF base address, linearization table0 and table1 addr. */
-	while (i < 3) {
-		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
-		if (!res) {
-			status = -ENODEV;
-			goto fail_nobase_res;
-		}
-		res = request_mem_region(res->start, resource_size(res),
-					 res->name);
-		if (!res) {
-			status = -EBUSY;
-			goto fail_nobase_res;
-		}
-		addr = ioremap(res->start, resource_size(res));
-		if (!addr) {
-			status = -ENOMEM;
-			goto fail_base_iomap;
-		}
-		switch (i) {
-		case 0:
-			/* ISIF base address */
-			isif_cfg.base_addr = addr;
-			break;
-		case 1:
-			/* ISIF linear tbl0 address */
-			isif_cfg.linear_tbl0_addr = addr;
-			break;
-		default:
-			/* ISIF linear tbl0 address */
-			isif_cfg.linear_tbl1_addr = addr;
-			break;
-		}
-		i++;
-	}
-	isif_cfg.dev = &pdev->dev;
-
-	printk(KERN_NOTICE "%s is registered with vpfe.\n",
-		isif_hw_dev.name);
-	return 0;
-fail_base_iomap:
-	release_mem_region(res->start, resource_size(res));
-	i--;
-fail_nobase_res:
-	if (isif_cfg.base_addr) {
-		iounmap(isif_cfg.base_addr);
-		isif_cfg.base_addr = NULL;
-	}
-	if (isif_cfg.linear_tbl0_addr) {
-		iounmap(isif_cfg.linear_tbl0_addr);
-		isif_cfg.linear_tbl0_addr = NULL;
-	}
-
-	while (i >= 0) {
-		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
-		if (res)
-			release_mem_region(res->start, resource_size(res));
-		i--;
-	}
-	vpfe_unregister_ccdc_device(&isif_hw_dev);
-	return status;
-}
-
-static int isif_remove(struct platform_device *pdev)
-{
-	struct resource	*res;
-	int i = 0;
-
-	iounmap(isif_cfg.base_addr);
-	isif_cfg.base_addr = NULL;
-	iounmap(isif_cfg.linear_tbl0_addr);
-	isif_cfg.linear_tbl0_addr = NULL;
-	iounmap(isif_cfg.linear_tbl1_addr);
-	isif_cfg.linear_tbl1_addr = NULL;
-	while (i < 3) {
-		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
-		release_mem_region(res->start, resource_size(res));
-		i++;
-	}
-	vpfe_unregister_ccdc_device(&isif_hw_dev);
-	return 0;
-}
-
-static struct platform_driver isif_driver = {
-	.driver = {
-		.name	= "isif",
-	},
-	.remove = isif_remove,
-	.probe = isif_probe,
-};
-
-module_platform_driver(isif_driver);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/media/deprecated/vpfe_capture/isif.h b/drivers/staging/media/deprecated/vpfe_capture/isif.h
deleted file mode 100644
index 8369acd26e7e..000000000000
--- a/drivers/staging/media/deprecated/vpfe_capture/isif.h
+++ /dev/null
@@ -1,518 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2008-2009 Texas Instruments Inc
- *
- * isif header file
- */
-#ifndef _ISIF_H
-#define _ISIF_H
-
-#include <media/davinci/ccdc_types.h>
-#include <media/davinci/vpfe_types.h>
-
-/* isif float type S8Q8/U8Q8 */
-struct isif_float_8 {
-	/* 8 bit integer part */
-	__u8 integer;
-	/* 8 bit decimal part */
-	__u8 decimal;
-};
-
-/* isif float type U16Q16/S16Q16 */
-struct isif_float_16 {
-	/* 16 bit integer part */
-	__u16 integer;
-	/* 16 bit decimal part */
-	__u16 decimal;
-};
-
-/************************************************************************
- *   Vertical Defect Correction parameters
- ***********************************************************************/
-/* Defect Correction (DFC) table entry */
-struct isif_vdfc_entry {
-	/* vertical position of defect */
-	__u16 pos_vert;
-	/* horizontal position of defect */
-	__u16 pos_horz;
-	/*
-	 * Defect level of Vertical line defect position. This is subtracted
-	 * from the data at the defect position
-	 */
-	__u8 level_at_pos;
-	/*
-	 * Defect level of the pixels upper than the vertical line defect.
-	 * This is subtracted from the data
-	 */
-	__u8 level_up_pixels;
-	/*
-	 * Defect level of the pixels lower than the vertical line defect.
-	 * This is subtracted from the data
-	 */
-	__u8 level_low_pixels;
-};
-
-#define ISIF_VDFC_TABLE_SIZE		8
-struct isif_dfc {
-	/* enable vertical defect correction */
-	__u8 en;
-	/* Defect level subtraction. Just fed through if saturating */
-#define	ISIF_VDFC_NORMAL		0
-	/*
-	 * Defect level subtraction. Horizontal interpolation ((i-2)+(i+2))/2
-	 * if data saturating
-	 */
-#define ISIF_VDFC_HORZ_INTERPOL_IF_SAT	1
-	/* Horizontal interpolation (((i-2)+(i+2))/2) */
-#define	ISIF_VDFC_HORZ_INTERPOL		2
-	/* one of the vertical defect correction modes above */
-	__u8 corr_mode;
-	/* 0 - whole line corrected, 1 - not pixels upper than the defect */
-	__u8 corr_whole_line;
-#define ISIF_VDFC_NO_SHIFT		0
-#define ISIF_VDFC_SHIFT_1		1
-#define ISIF_VDFC_SHIFT_2		2
-#define ISIF_VDFC_SHIFT_3		3
-#define ISIF_VDFC_SHIFT_4		4
-	/*
-	 * defect level shift value. level_at_pos, level_upper_pos,
-	 * and level_lower_pos can be shifted up by this value. Choose
-	 * one of the values above
-	 */
-	__u8 def_level_shift;
-	/* defect saturation level */
-	__u16 def_sat_level;
-	/* number of vertical defects. Max is ISIF_VDFC_TABLE_SIZE */
-	__u16 num_vdefects;
-	/* VDFC table ptr */
-	struct isif_vdfc_entry table[ISIF_VDFC_TABLE_SIZE];
-};
-
-struct isif_horz_bclamp {
-
-	/* Horizontal clamp disabled. Only vertical clamp value is subtracted */
-#define	ISIF_HORZ_BC_DISABLE		0
-	/*
-	 * Horizontal clamp value is calculated and subtracted from image data
-	 * along with vertical clamp value
-	 */
-#define ISIF_HORZ_BC_CLAMP_CALC_ENABLED	1
-	/*
-	 * Horizontal clamp value calculated from previous image is subtracted
-	 * from image data along with vertical clamp value.
-	 */
-#define ISIF_HORZ_BC_CLAMP_NOT_UPDATED	2
-	/* horizontal clamp mode. One of the values above */
-	__u8 mode;
-	/*
-	 * pixel value limit enable.
-	 *  0 - limit disabled
-	 *  1 - pixel value limited to 1023
-	 */
-	__u8 clamp_pix_limit;
-	/* Select Most left window for bc calculation */
-#define	ISIF_SEL_MOST_LEFT_WIN		0
-	/* Select Most right window for bc calculation */
-#define ISIF_SEL_MOST_RIGHT_WIN		1
-	/* Select most left or right window for clamp val calculation */
-	__u8 base_win_sel_calc;
-	/* Window count per color for calculation. range 1-32 */
-	__u8 win_count_calc;
-	/* Window start position - horizontal for calculation. 0 - 8191 */
-	__u16 win_start_h_calc;
-	/* Window start position - vertical for calculation 0 - 8191 */
-	__u16 win_start_v_calc;
-#define ISIF_HORZ_BC_SZ_H_2PIXELS	0
-#define ISIF_HORZ_BC_SZ_H_4PIXELS	1
-#define ISIF_HORZ_BC_SZ_H_8PIXELS	2
-#define ISIF_HORZ_BC_SZ_H_16PIXELS	3
-	/* Width of the sample window in pixels for calculation */
-	__u8 win_h_sz_calc;
-#define ISIF_HORZ_BC_SZ_V_32PIXELS	0
-#define ISIF_HORZ_BC_SZ_V_64PIXELS	1
-#define	ISIF_HORZ_BC_SZ_V_128PIXELS	2
-#define ISIF_HORZ_BC_SZ_V_256PIXELS	3
-	/* Height of the sample window in pixels for calculation */
-	__u8 win_v_sz_calc;
-};
-
-/************************************************************************
- *  Black Clamp parameters
- ***********************************************************************/
-struct isif_vert_bclamp {
-	/* Reset value used is the clamp value calculated */
-#define	ISIF_VERT_BC_USE_HORZ_CLAMP_VAL		0
-	/* Reset value used is reset_clamp_val configured */
-#define	ISIF_VERT_BC_USE_CONFIG_CLAMP_VAL	1
-	/* No update, previous image value is used */
-#define	ISIF_VERT_BC_NO_UPDATE			2
-	/*
-	 * Reset value selector for vertical clamp calculation. Use one of
-	 * the above values
-	 */
-	__u8 reset_val_sel;
-	/* U8Q8. Line average coefficient used in vertical clamp calculation */
-	__u8 line_ave_coef;
-	/* Height of the optical black region for calculation */
-	__u16 ob_v_sz_calc;
-	/* Optical black region start position - horizontal. 0 - 8191 */
-	__u16 ob_start_h;
-	/* Optical black region start position - vertical 0 - 8191 */
-	__u16 ob_start_v;
-};
-
-struct isif_black_clamp {
-	/*
-	 * This offset value is added irrespective of the clamp enable status.
-	 * S13
-	 */
-	__u16 dc_offset;
-	/*
-	 * Enable black/digital clamp value to be subtracted from the image data
-	 */
-	__u8 en;
-	/*
-	 * black clamp mode. same/separate clamp for 4 colors
-	 * 0 - disable - same clamp value for all colors
-	 * 1 - clamp value calculated separately for all colors
-	 */
-	__u8 bc_mode_color;
-	/* Vertical start position for bc subtraction */
-	__u16 vert_start_sub;
-	/* Black clamp for horizontal direction */
-	struct isif_horz_bclamp horz;
-	/* Black clamp for vertical direction */
-	struct isif_vert_bclamp vert;
-};
-
-/*************************************************************************
-** Color Space Conversion (CSC)
-*************************************************************************/
-#define ISIF_CSC_NUM_COEFF	16
-struct isif_color_space_conv {
-	/* Enable color space conversion */
-	__u8 en;
-	/*
-	 * csc coefficient table. S8Q5, M00 at index 0, M01 at index 1, and
-	 * so forth
-	 */
-	struct isif_float_8 coeff[ISIF_CSC_NUM_COEFF];
-};
-
-
-/*************************************************************************
-**  Black  Compensation parameters
-*************************************************************************/
-struct isif_black_comp {
-	/* Comp for Red */
-	__s8 r_comp;
-	/* Comp for Gr */
-	__s8 gr_comp;
-	/* Comp for Blue */
-	__s8 b_comp;
-	/* Comp for Gb */
-	__s8 gb_comp;
-};
-
-/*************************************************************************
-**  Gain parameters
-*************************************************************************/
-struct isif_gain {
-	/* Gain for Red or ye */
-	struct isif_float_16 r_ye;
-	/* Gain for Gr or cy */
-	struct isif_float_16 gr_cy;
-	/* Gain for Gb or g */
-	struct isif_float_16 gb_g;
-	/* Gain for Blue or mg */
-	struct isif_float_16 b_mg;
-};
-
-#define ISIF_LINEAR_TAB_SIZE	192
-/*************************************************************************
-**  Linearization parameters
-*************************************************************************/
-struct isif_linearize {
-	/* Enable or Disable linearization of data */
-	__u8 en;
-	/* Shift value applied */
-	__u8 corr_shft;
-	/* scale factor applied U11Q10 */
-	struct isif_float_16 scale_fact;
-	/* Size of the linear table */
-	__u16 table[ISIF_LINEAR_TAB_SIZE];
-};
-
-/* Color patterns */
-#define ISIF_RED	0
-#define	ISIF_GREEN_RED	1
-#define ISIF_GREEN_BLUE	2
-#define ISIF_BLUE	3
-struct isif_col_pat {
-	__u8 olop;
-	__u8 olep;
-	__u8 elop;
-	__u8 elep;
-};
-
-/*************************************************************************
-**  Data formatter parameters
-*************************************************************************/
-struct isif_fmtplen {
-	/*
-	 * number of program entries for SET0, range 1 - 16
-	 * when fmtmode is ISIF_SPLIT, 1 - 8 when fmtmode is
-	 * ISIF_COMBINE
-	 */
-	__u16 plen0;
-	/*
-	 * number of program entries for SET1, range 1 - 16
-	 * when fmtmode is ISIF_SPLIT, 1 - 8 when fmtmode is
-	 * ISIF_COMBINE
-	 */
-	__u16 plen1;
-	/**
-	 * number of program entries for SET2, range 1 - 16
-	 * when fmtmode is ISIF_SPLIT, 1 - 8 when fmtmode is
-	 * ISIF_COMBINE
-	 */
-	__u16 plen2;
-	/**
-	 * number of program entries for SET3, range 1 - 16
-	 * when fmtmode is ISIF_SPLIT, 1 - 8 when fmtmode is
-	 * ISIF_COMBINE
-	 */
-	__u16 plen3;
-};
-
-struct isif_fmt_cfg {
-#define ISIF_SPLIT		0
-#define ISIF_COMBINE		1
-	/* Split or combine or line alternate */
-	__u8 fmtmode;
-	/* enable or disable line alternating mode */
-	__u8 ln_alter_en;
-#define ISIF_1LINE		0
-#define	ISIF_2LINES		1
-#define	ISIF_3LINES		2
-#define	ISIF_4LINES		3
-	/* Split/combine line number */
-	__u8 lnum;
-	/* Address increment Range 1 - 16 */
-	__u8 addrinc;
-};
-
-struct isif_fmt_addr_ptr {
-	/* Initial address */
-	__u32 init_addr;
-	/* output line number */
-#define ISIF_1STLINE		0
-#define	ISIF_2NDLINE		1
-#define	ISIF_3RDLINE		2
-#define	ISIF_4THLINE		3
-	__u8 out_line;
-};
-
-struct isif_fmtpgm_ap {
-	/* program address pointer */
-	__u8 pgm_aptr;
-	/* program address increment or decrement */
-	__u8 pgmupdt;
-};
-
-struct isif_data_formatter {
-	/* Enable/Disable data formatter */
-	__u8 en;
-	/* data formatter configuration */
-	struct isif_fmt_cfg cfg;
-	/* Formatter program entries length */
-	struct isif_fmtplen plen;
-	/* first pixel in a line fed to formatter */
-	__u16 fmtrlen;
-	/* HD interval for output line. Only valid when split line */
-	__u16 fmthcnt;
-	/* formatter address pointers */
-	struct isif_fmt_addr_ptr fmtaddr_ptr[16];
-	/* program enable/disable */
-	__u8 pgm_en[32];
-	/* program address pointers */
-	struct isif_fmtpgm_ap fmtpgm_ap[32];
-};
-
-struct isif_df_csc {
-	/* Color Space Conversion configuration, 0 - csc, 1 - df */
-	__u8 df_or_csc;
-	/* csc configuration valid if df_or_csc is 0 */
-	struct isif_color_space_conv csc;
-	/* data formatter configuration valid if df_or_csc is 1 */
-	struct isif_data_formatter df;
-	/* start pixel in a line at the input */
-	__u32 start_pix;
-	/* number of pixels in input line */
-	__u32 num_pixels;
-	/* start line at the input */
-	__u32 start_line;
-	/* number of lines at the input */
-	__u32 num_lines;
-};
-
-struct isif_gain_offsets_adj {
-	/* Gain adjustment per color */
-	struct isif_gain gain;
-	/* Offset adjustment */
-	__u16 offset;
-	/* Enable or Disable Gain adjustment for SDRAM data */
-	__u8 gain_sdram_en;
-	/* Enable or Disable Gain adjustment for IPIPE data */
-	__u8 gain_ipipe_en;
-	/* Enable or Disable Gain adjustment for H3A data */
-	__u8 gain_h3a_en;
-	/* Enable or Disable Gain adjustment for SDRAM data */
-	__u8 offset_sdram_en;
-	/* Enable or Disable Gain adjustment for IPIPE data */
-	__u8 offset_ipipe_en;
-	/* Enable or Disable Gain adjustment for H3A data */
-	__u8 offset_h3a_en;
-};
-
-struct isif_cul {
-	/* Horizontal Cull pattern for odd lines */
-	__u8 hcpat_odd;
-	/* Horizontal Cull pattern for even lines */
-	__u8 hcpat_even;
-	/* Vertical Cull pattern */
-	__u8 vcpat;
-	/* Enable or disable lpf. Apply when cull is enabled */
-	__u8 en_lpf;
-};
-
-struct isif_compress {
-#define ISIF_ALAW		0
-#define ISIF_DPCM		1
-#define ISIF_NO_COMPRESSION	2
-	/* Compression Algorithm used */
-	__u8 alg;
-	/* Choose Predictor1 for DPCM compression */
-#define ISIF_DPCM_PRED1		0
-	/* Choose Predictor2 for DPCM compression */
-#define ISIF_DPCM_PRED2		1
-	/* Predictor for DPCM compression */
-	__u8 pred;
-};
-
-/* all the stuff in this struct will be provided by userland */
-struct isif_config_params_raw {
-	/* Linearization parameters for image sensor data input */
-	struct isif_linearize linearize;
-	/* Data formatter or CSC */
-	struct isif_df_csc df_csc;
-	/* Defect Pixel Correction (DFC) configuration */
-	struct isif_dfc dfc;
-	/* Black/Digital Clamp configuration */
-	struct isif_black_clamp bclamp;
-	/* Gain, offset adjustments */
-	struct isif_gain_offsets_adj gain_offset;
-	/* Culling */
-	struct isif_cul culling;
-	/* A-Law and DPCM compression options */
-	struct isif_compress compress;
-	/* horizontal offset for Gain/LSC/DFC */
-	__u16 horz_offset;
-	/* vertical offset for Gain/LSC/DFC */
-	__u16 vert_offset;
-	/* color pattern for field 0 */
-	struct isif_col_pat col_pat_field0;
-	/* color pattern for field 1 */
-	struct isif_col_pat col_pat_field1;
-#define ISIF_NO_SHIFT		0
-#define	ISIF_1BIT_SHIFT		1
-#define	ISIF_2BIT_SHIFT		2
-#define	ISIF_3BIT_SHIFT		3
-#define	ISIF_4BIT_SHIFT		4
-#define ISIF_5BIT_SHIFT		5
-#define ISIF_6BIT_SHIFT		6
-	/* Data shift applied before storing to SDRAM */
-	__u8 data_shift;
-	/* enable input test pattern generation */
-	__u8 test_pat_gen;
-};
-
-#ifdef __KERNEL__
-struct isif_ycbcr_config {
-	/* isif pixel format */
-	enum ccdc_pixfmt pix_fmt;
-	/* isif frame format */
-	enum ccdc_frmfmt frm_fmt;
-	/* ISIF crop window */
-	struct v4l2_rect win;
-	/* field polarity */
-	enum vpfe_pin_pol fid_pol;
-	/* interface VD polarity */
-	enum vpfe_pin_pol vd_pol;
-	/* interface HD polarity */
-	enum vpfe_pin_pol hd_pol;
-	/* isif pix order. Only used for ycbcr capture */
-	enum ccdc_pixorder pix_order;
-	/* isif buffer type. Only used for ycbcr capture */
-	enum ccdc_buftype buf_type;
-};
-
-/* MSB of image data connected to sensor port */
-enum isif_data_msb {
-	ISIF_BIT_MSB_15,
-	ISIF_BIT_MSB_14,
-	ISIF_BIT_MSB_13,
-	ISIF_BIT_MSB_12,
-	ISIF_BIT_MSB_11,
-	ISIF_BIT_MSB_10,
-	ISIF_BIT_MSB_9,
-	ISIF_BIT_MSB_8,
-	ISIF_BIT_MSB_7
-};
-
-enum isif_cfa_pattern {
-	ISIF_CFA_PAT_MOSAIC,
-	ISIF_CFA_PAT_STRIPE
-};
-
-struct isif_params_raw {
-	/* isif pixel format */
-	enum ccdc_pixfmt pix_fmt;
-	/* isif frame format */
-	enum ccdc_frmfmt frm_fmt;
-	/* video window */
-	struct v4l2_rect win;
-	/* field polarity */
-	enum vpfe_pin_pol fid_pol;
-	/* interface VD polarity */
-	enum vpfe_pin_pol vd_pol;
-	/* interface HD polarity */
-	enum vpfe_pin_pol hd_pol;
-	/* buffer type. Applicable for interlaced mode */
-	enum ccdc_buftype buf_type;
-	/* Gain values */
-	struct isif_gain gain;
-	/* cfa pattern */
-	enum isif_cfa_pattern cfa_pat;
-	/* Data MSB position */
-	enum isif_data_msb data_msb;
-	/* Enable horizontal flip */
-	unsigned char horz_flip_en;
-	/* Enable image invert vertically */
-	unsigned char image_invert_en;
-
-	/* all the userland defined stuff*/
-	struct isif_config_params_raw config_params;
-};
-
-enum isif_data_pack {
-	ISIF_PACK_16BIT,
-	ISIF_PACK_12BIT,
-	ISIF_PACK_8BIT
-};
-
-#define ISIF_WIN_NTSC				{0, 0, 720, 480}
-#define ISIF_WIN_VGA				{0, 0, 640, 480}
-
-#endif
-#endif
diff --git a/drivers/staging/media/deprecated/vpfe_capture/isif_regs.h b/drivers/staging/media/deprecated/vpfe_capture/isif_regs.h
deleted file mode 100644
index d68d38841ae7..000000000000
--- a/drivers/staging/media/deprecated/vpfe_capture/isif_regs.h
+++ /dev/null
@@ -1,256 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2008-2009 Texas Instruments Inc
- */
-#ifndef _ISIF_REGS_H
-#define _ISIF_REGS_H
-
-/* ISIF registers relative offsets */
-#define SYNCEN					0x00
-#define MODESET					0x04
-#define HDW					0x08
-#define VDW					0x0c
-#define PPLN					0x10
-#define LPFR					0x14
-#define SPH					0x18
-#define LNH					0x1c
-#define SLV0					0x20
-#define SLV1					0x24
-#define LNV					0x28
-#define CULH					0x2c
-#define CULV					0x30
-#define HSIZE					0x34
-#define SDOFST					0x38
-#define CADU					0x3c
-#define CADL					0x40
-#define LINCFG0					0x44
-#define LINCFG1					0x48
-#define CCOLP					0x4c
-#define CRGAIN					0x50
-#define CGRGAIN					0x54
-#define CGBGAIN					0x58
-#define CBGAIN					0x5c
-#define COFSTA					0x60
-#define FLSHCFG0				0x64
-#define FLSHCFG1				0x68
-#define FLSHCFG2				0x6c
-#define VDINT0					0x70
-#define VDINT1					0x74
-#define VDINT2					0x78
-#define MISC					0x7c
-#define CGAMMAWD				0x80
-#define REC656IF				0x84
-#define CCDCFG					0x88
-/*****************************************************
-* Defect Correction registers
-*****************************************************/
-#define DFCCTL					0x8c
-#define VDFSATLV				0x90
-#define DFCMEMCTL				0x94
-#define DFCMEM0					0x98
-#define DFCMEM1					0x9c
-#define DFCMEM2					0xa0
-#define DFCMEM3					0xa4
-#define DFCMEM4					0xa8
-/****************************************************
-* Black Clamp registers
-****************************************************/
-#define CLAMPCFG				0xac
-#define CLDCOFST				0xb0
-#define CLSV					0xb4
-#define CLHWIN0					0xb8
-#define CLHWIN1					0xbc
-#define CLHWIN2					0xc0
-#define CLVRV					0xc4
-#define CLVWIN0					0xc8
-#define CLVWIN1					0xcc
-#define CLVWIN2					0xd0
-#define CLVWIN3					0xd4
-/****************************************************
-* Lense Shading Correction
-****************************************************/
-#define DATAHOFST				0xd8
-#define DATAVOFST				0xdc
-#define LSCHVAL					0xe0
-#define LSCVVAL					0xe4
-#define TWODLSCCFG				0xe8
-#define TWODLSCOFST				0xec
-#define TWODLSCINI				0xf0
-#define TWODLSCGRBU				0xf4
-#define TWODLSCGRBL				0xf8
-#define TWODLSCGROF				0xfc
-#define TWODLSCORBU				0x100
-#define TWODLSCORBL				0x104
-#define TWODLSCOROF				0x108
-#define TWODLSCIRQEN				0x10c
-#define TWODLSCIRQST				0x110
-/****************************************************
-* Data formatter
-****************************************************/
-#define FMTCFG					0x114
-#define FMTPLEN					0x118
-#define FMTSPH					0x11c
-#define FMTLNH					0x120
-#define FMTSLV					0x124
-#define FMTLNV					0x128
-#define FMTRLEN					0x12c
-#define FMTHCNT					0x130
-#define FMTAPTR_BASE				0x134
-/* Below macro for addresses FMTAPTR0 - FMTAPTR15 */
-#define FMTAPTR(i)			(FMTAPTR_BASE + (i * 4))
-#define FMTPGMVF0				0x174
-#define FMTPGMVF1				0x178
-#define FMTPGMAPU0				0x17c
-#define FMTPGMAPU1				0x180
-#define FMTPGMAPS0				0x184
-#define FMTPGMAPS1				0x188
-#define FMTPGMAPS2				0x18c
-#define FMTPGMAPS3				0x190
-#define FMTPGMAPS4				0x194
-#define FMTPGMAPS5				0x198
-#define FMTPGMAPS6				0x19c
-#define FMTPGMAPS7				0x1a0
-/************************************************
-* Color Space Converter
-************************************************/
-#define CSCCTL					0x1a4
-#define CSCM0					0x1a8
-#define CSCM1					0x1ac
-#define CSCM2					0x1b0
-#define CSCM3					0x1b4
-#define CSCM4					0x1b8
-#define CSCM5					0x1bc
-#define CSCM6					0x1c0
-#define CSCM7					0x1c4
-#define OBWIN0					0x1c8
-#define OBWIN1					0x1cc
-#define OBWIN2					0x1d0
-#define OBWIN3					0x1d4
-#define OBVAL0					0x1d8
-#define OBVAL1					0x1dc
-#define OBVAL2					0x1e0
-#define OBVAL3					0x1e4
-#define OBVAL4					0x1e8
-#define OBVAL5					0x1ec
-#define OBVAL6					0x1f0
-#define OBVAL7					0x1f4
-#define CLKCTL					0x1f8
-
-/* Masks & Shifts below */
-#define START_PX_HOR_MASK			0x7FFF
-#define NUM_PX_HOR_MASK				0x7FFF
-#define START_VER_ONE_MASK			0x7FFF
-#define START_VER_TWO_MASK			0x7FFF
-#define NUM_LINES_VER				0x7FFF
-
-/* gain - offset masks */
-#define GAIN_INTEGER_SHIFT			9
-#define OFFSET_MASK				0xFFF
-#define GAIN_SDRAM_EN_SHIFT			12
-#define GAIN_IPIPE_EN_SHIFT			13
-#define GAIN_H3A_EN_SHIFT			14
-#define OFST_SDRAM_EN_SHIFT			8
-#define OFST_IPIPE_EN_SHIFT			9
-#define OFST_H3A_EN_SHIFT			10
-#define GAIN_OFFSET_EN_MASK			0x7700
-
-/* Culling */
-#define CULL_PAT_EVEN_LINE_SHIFT		8
-
-/* CCDCFG register */
-#define ISIF_YCINSWP_RAW			(0x00 << 4)
-#define ISIF_YCINSWP_YCBCR			(0x01 << 4)
-#define ISIF_CCDCFG_FIDMD_LATCH_VSYNC		(0x00 << 6)
-#define ISIF_CCDCFG_WENLOG_AND			(0x00 << 8)
-#define ISIF_CCDCFG_TRGSEL_WEN			(0x00 << 9)
-#define ISIF_CCDCFG_EXTRG_DISABLE		(0x00 << 10)
-#define ISIF_LATCH_ON_VSYNC_DISABLE		(0x01 << 15)
-#define ISIF_LATCH_ON_VSYNC_ENABLE		(0x00 << 15)
-#define ISIF_DATA_PACK_MASK			3
-#define ISIF_DATA_PACK16			0
-#define ISIF_DATA_PACK12			1
-#define ISIF_DATA_PACK8				2
-#define ISIF_PIX_ORDER_SHIFT			11
-#define ISIF_BW656_ENABLE			(0x01 << 5)
-
-/* MODESET registers */
-#define ISIF_VDHDOUT_INPUT			(0x00 << 0)
-#define ISIF_INPUT_SHIFT			12
-#define ISIF_RAW_INPUT_MODE			0
-#define ISIF_FID_POL_SHIFT			4
-#define ISIF_HD_POL_SHIFT			3
-#define ISIF_VD_POL_SHIFT			2
-#define ISIF_DATAPOL_NORMAL			0
-#define ISIF_DATAPOL_SHIFT			6
-#define ISIF_EXWEN_DISABLE			0
-#define ISIF_EXWEN_SHIFT			5
-#define ISIF_FRM_FMT_SHIFT			7
-#define ISIF_DATASFT_SHIFT			8
-#define ISIF_LPF_SHIFT				14
-#define ISIF_LPF_MASK				1
-
-/* GAMMAWD registers */
-#define ISIF_ALAW_GAMMA_WD_MASK			0xF
-#define ISIF_ALAW_GAMMA_WD_SHIFT		1
-#define ISIF_ALAW_ENABLE			1
-#define ISIF_GAMMAWD_CFA_SHIFT			5
-
-/* HSIZE registers */
-#define ISIF_HSIZE_FLIP_MASK			1
-#define ISIF_HSIZE_FLIP_SHIFT			12
-
-/* MISC registers */
-#define ISIF_DPCM_EN_SHIFT			12
-#define ISIF_DPCM_PREDICTOR_SHIFT		13
-
-/* Black clamp related */
-#define ISIF_BC_MODE_COLOR_SHIFT		4
-#define ISIF_HORZ_BC_MODE_SHIFT			1
-#define ISIF_HORZ_BC_WIN_SEL_SHIFT		5
-#define ISIF_HORZ_BC_PIX_LIMIT_SHIFT		6
-#define ISIF_HORZ_BC_WIN_H_SIZE_SHIFT		8
-#define ISIF_HORZ_BC_WIN_V_SIZE_SHIFT		12
-#define	ISIF_VERT_BC_RST_VAL_SEL_SHIFT		4
-#define ISIF_VERT_BC_LINE_AVE_COEF_SHIFT	8
-
-/* VDFC registers */
-#define ISIF_VDFC_EN_SHIFT			4
-#define ISIF_VDFC_CORR_MOD_SHIFT		5
-#define ISIF_VDFC_CORR_WHOLE_LN_SHIFT		7
-#define ISIF_VDFC_LEVEL_SHFT_SHIFT		8
-#define ISIF_VDFC_POS_MASK			0x1FFF
-#define ISIF_DFCMEMCTL_DFCMARST_SHIFT		2
-
-/* CSC registers */
-#define ISIF_CSC_COEF_INTEG_MASK		7
-#define ISIF_CSC_COEF_DECIMAL_MASK		0x1f
-#define ISIF_CSC_COEF_INTEG_SHIFT		5
-#define ISIF_CSCM_MSB_SHIFT			8
-#define ISIF_DF_CSC_SPH_MASK			0x1FFF
-#define ISIF_DF_CSC_LNH_MASK			0x1FFF
-#define ISIF_DF_CSC_SLV_MASK			0x1FFF
-#define ISIF_DF_CSC_LNV_MASK			0x1FFF
-#define ISIF_DF_NUMLINES			0x7FFF
-#define ISIF_DF_NUMPIX				0x1FFF
-
-/* Offsets for LSC/DFC/Gain */
-#define ISIF_DATA_H_OFFSET_MASK			0x1FFF
-#define ISIF_DATA_V_OFFSET_MASK			0x1FFF
-
-/* Linearization */
-#define ISIF_LIN_CORRSFT_SHIFT			4
-#define ISIF_LIN_SCALE_FACT_INTEG_SHIFT		10
-
-
-/* Pattern registers */
-#define ISIF_PG_EN				(1 << 3)
-#define ISIF_SEL_PG_SRC				(3 << 4)
-#define ISIF_PG_VD_POL_SHIFT			0
-#define ISIF_PG_HD_POL_SHIFT			1
-
-/*random other junk*/
-#define ISIF_SYNCEN_VDHDEN_MASK			(1 << 0)
-#define ISIF_SYNCEN_WEN_MASK			(1 << 1)
-#define ISIF_SYNCEN_WEN_SHIFT			1
-
-#endif
diff --git a/drivers/staging/media/deprecated/vpfe_capture/vpfe_capture.c b/drivers/staging/media/deprecated/vpfe_capture/vpfe_capture.c
deleted file mode 100644
index 0a2226b321d7..000000000000
--- a/drivers/staging/media/deprecated/vpfe_capture/vpfe_capture.c
+++ /dev/null
@@ -1,1902 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2008-2009 Texas Instruments Inc
- *
- * Driver name : VPFE Capture driver
- *    VPFE Capture driver allows applications to capture and stream video
- *    frames on DaVinci SoCs (DM6446, DM355 etc) from a YUV source such as
- *    TVP5146 or  Raw Bayer RGB image data from an image sensor
- *    such as Microns' MT9T001, MT9T031 etc.
- *
- *    These SoCs have, in common, a Video Processing Subsystem (VPSS) that
- *    consists of a Video Processing Front End (VPFE) for capturing
- *    video/raw image data and Video Processing Back End (VPBE) for displaying
- *    YUV data through an in-built analog encoder or Digital LCD port. This
- *    driver is for capture through VPFE. A typical EVM using these SoCs have
- *    following high level configuration.
- *
- *    decoder(TVP5146/		YUV/
- *	     MT9T001)   -->  Raw Bayer RGB ---> MUX -> VPFE (CCDC/ISIF)
- *				data input              |      |
- *							V      |
- *						      SDRAM    |
- *							       V
- *							   Image Processor
- *							       |
- *							       V
- *							     SDRAM
- *    The data flow happens from a decoder connected to the VPFE over a
- *    YUV embedded (BT.656/BT.1120) or separate sync or raw bayer rgb interface
- *    and to the input of VPFE through an optional MUX (if more inputs are
- *    to be interfaced on the EVM). The input data is first passed through
- *    CCDC (CCD Controller, a.k.a Image Sensor Interface, ISIF). The CCDC
- *    does very little or no processing on YUV data and does pre-process Raw
- *    Bayer RGB data through modules such as Defect Pixel Correction (DFC)
- *    Color Space Conversion (CSC), data gain/offset etc. After this, data
- *    can be written to SDRAM or can be connected to the image processing
- *    block such as IPIPE (on DM355 only).
- *
- *    Features supported
- *		- MMAP IO
- *		- Capture using TVP5146 over BT.656
- *		- support for interfacing decoders using sub device model
- *		- Work with DM355 or DM6446 CCDC to do Raw Bayer RGB/YUV
- *		  data capture to SDRAM.
- *    TODO list
- *		- Support multiple REQBUF after open
- *		- Support for de-allocating buffers through REQBUF
- *		- Support for Raw Bayer RGB capture
- *		- Support for chaining Image Processor
- *		- Support for static allocation of buffers
- *		- Support for USERPTR IO
- *		- Support for STREAMON before QBUF
- *		- Support for control ioctls
- */
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <media/v4l2-common.h>
-#include <linux/io.h>
-#include <media/davinci/vpfe_capture.h>
-#include "ccdc_hw_device.h"
-
-static int debug;
-static u32 numbuffers = 3;
-static u32 bufsize = (720 * 576 * 2);
-
-module_param(numbuffers, uint, S_IRUGO);
-module_param(bufsize, uint, S_IRUGO);
-module_param(debug, int, 0644);
-
-MODULE_PARM_DESC(numbuffers, "buffer count (default:3)");
-MODULE_PARM_DESC(bufsize, "buffer size in bytes (default:720 x 576 x 2)");
-MODULE_PARM_DESC(debug, "Debug level 0-1");
-
-MODULE_DESCRIPTION("VPFE Video for Linux Capture Driver");
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Texas Instruments");
-
-/* standard information */
-struct vpfe_standard {
-	v4l2_std_id std_id;
-	unsigned int width;
-	unsigned int height;
-	struct v4l2_fract pixelaspect;
-	/* 0 - progressive, 1 - interlaced */
-	int frame_format;
-};
-
-/* ccdc configuration */
-struct ccdc_config {
-	/* This make sure vpfe is probed and ready to go */
-	int vpfe_probed;
-	/* name of ccdc device */
-	char name[32];
-};
-
-/* data structures */
-static struct vpfe_config_params config_params = {
-	.min_numbuffers = 3,
-	.numbuffers = 3,
-	.min_bufsize = 720 * 480 * 2,
-	.device_bufsize = 720 * 576 * 2,
-};
-
-/* ccdc device registered */
-static const struct ccdc_hw_device *ccdc_dev;
-/* lock for accessing ccdc information */
-static DEFINE_MUTEX(ccdc_lock);
-/* ccdc configuration */
-static struct ccdc_config *ccdc_cfg;
-
-static const struct vpfe_standard vpfe_standards[] = {
-	{V4L2_STD_525_60, 720, 480, {11, 10}, 1},
-	{V4L2_STD_625_50, 720, 576, {54, 59}, 1},
-};
-
-/* Used when raw Bayer image from ccdc is directly captured to SDRAM */
-static const struct vpfe_pixel_format vpfe_pix_fmts[] = {
-	{
-		.pixelformat = V4L2_PIX_FMT_SBGGR8,
-		.bpp = 1,
-	},
-	{
-		.pixelformat = V4L2_PIX_FMT_SBGGR16,
-		.bpp = 2,
-	},
-	{
-		.pixelformat = V4L2_PIX_FMT_SGRBG10DPCM8,
-		.bpp = 1,
-	},
-	{
-		.pixelformat = V4L2_PIX_FMT_UYVY,
-		.bpp = 2,
-	},
-	{
-		.pixelformat = V4L2_PIX_FMT_YUYV,
-		.bpp = 2,
-	},
-	{
-		.pixelformat = V4L2_PIX_FMT_NV12,
-		.bpp = 1,
-	},
-};
-
-/*
- * vpfe_lookup_pix_format()
- * lookup an entry in the vpfe pix format table based on pix_format
- */
-static const struct vpfe_pixel_format *vpfe_lookup_pix_format(u32 pix_format)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(vpfe_pix_fmts); i++) {
-		if (pix_format == vpfe_pix_fmts[i].pixelformat)
-			return &vpfe_pix_fmts[i];
-	}
-	return NULL;
-}
-
-/*
- * vpfe_register_ccdc_device. CCDC module calls this to
- * register with vpfe capture
- */
-int vpfe_register_ccdc_device(const struct ccdc_hw_device *dev)
-{
-	int ret = 0;
-	printk(KERN_NOTICE "vpfe_register_ccdc_device: %s\n", dev->name);
-
-	if (!dev->hw_ops.open ||
-	    !dev->hw_ops.enable ||
-	    !dev->hw_ops.set_hw_if_params ||
-	    !dev->hw_ops.configure ||
-	    !dev->hw_ops.set_buftype ||
-	    !dev->hw_ops.get_buftype ||
-	    !dev->hw_ops.enum_pix ||
-	    !dev->hw_ops.set_frame_format ||
-	    !dev->hw_ops.get_frame_format ||
-	    !dev->hw_ops.get_pixel_format ||
-	    !dev->hw_ops.set_pixel_format ||
-	    !dev->hw_ops.set_image_window ||
-	    !dev->hw_ops.get_image_window ||
-	    !dev->hw_ops.get_line_length ||
-	    !dev->hw_ops.getfid)
-		return -EINVAL;
-
-	mutex_lock(&ccdc_lock);
-	if (!ccdc_cfg) {
-		/*
-		 * TODO. Will this ever happen? if so, we need to fix it.
-		 * Probably we need to add the request to a linked list and
-		 * walk through it during vpfe probe
-		 */
-		printk(KERN_ERR "vpfe capture not initialized\n");
-		ret = -EFAULT;
-		goto unlock;
-	}
-
-	if (strcmp(dev->name, ccdc_cfg->name)) {
-		/* ignore this ccdc */
-		ret = -EINVAL;
-		goto unlock;
-	}
-
-	if (ccdc_dev) {
-		printk(KERN_ERR "ccdc already registered\n");
-		ret = -EINVAL;
-		goto unlock;
-	}
-
-	ccdc_dev = dev;
-unlock:
-	mutex_unlock(&ccdc_lock);
-	return ret;
-}
-EXPORT_SYMBOL(vpfe_register_ccdc_device);
-
-/*
- * vpfe_unregister_ccdc_device. CCDC module calls this to
- * unregister with vpfe capture
- */
-void vpfe_unregister_ccdc_device(const struct ccdc_hw_device *dev)
-{
-	if (!dev) {
-		printk(KERN_ERR "invalid ccdc device ptr\n");
-		return;
-	}
-
-	printk(KERN_NOTICE "vpfe_unregister_ccdc_device, dev->name = %s\n",
-		dev->name);
-
-	if (strcmp(dev->name, ccdc_cfg->name)) {
-		/* ignore this ccdc */
-		return;
-	}
-
-	mutex_lock(&ccdc_lock);
-	ccdc_dev = NULL;
-	mutex_unlock(&ccdc_lock);
-}
-EXPORT_SYMBOL(vpfe_unregister_ccdc_device);
-
-/*
- * vpfe_config_ccdc_image_format()
- * For a pix format, configure ccdc to setup the capture
- */
-static int vpfe_config_ccdc_image_format(struct vpfe_device *vpfe_dev)
-{
-	enum ccdc_frmfmt frm_fmt = CCDC_FRMFMT_INTERLACED;
-	int ret = 0;
-
-	if (ccdc_dev->hw_ops.set_pixel_format(
-			vpfe_dev->fmt.fmt.pix.pixelformat) < 0) {
-		v4l2_err(&vpfe_dev->v4l2_dev,
-			"couldn't set pix format in ccdc\n");
-		return -EINVAL;
-	}
-	/* configure the image window */
-	ccdc_dev->hw_ops.set_image_window(&vpfe_dev->crop);
-
-	switch (vpfe_dev->fmt.fmt.pix.field) {
-	case V4L2_FIELD_INTERLACED:
-		/* do nothing, since it is default */
-		ret = ccdc_dev->hw_ops.set_buftype(
-				CCDC_BUFTYPE_FLD_INTERLEAVED);
-		break;
-	case V4L2_FIELD_NONE:
-		frm_fmt = CCDC_FRMFMT_PROGRESSIVE;
-		/* buffer type only applicable for interlaced scan */
-		break;
-	case V4L2_FIELD_SEQ_TB:
-		ret = ccdc_dev->hw_ops.set_buftype(
-				CCDC_BUFTYPE_FLD_SEPARATED);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	/* set the frame format */
-	if (!ret)
-		ret = ccdc_dev->hw_ops.set_frame_format(frm_fmt);
-	return ret;
-}
-/*
- * vpfe_config_image_format()
- * For a given standard, this functions sets up the default
- * pix format & crop values in the vpfe device and ccdc.  It first
- * starts with defaults based values from the standard table.
- * It then checks if sub device supports get_fmt and then override the
- * values based on that.Sets crop values to match with scan resolution
- * starting at 0,0. It calls vpfe_config_ccdc_image_format() set the
- * values in ccdc
- */
-static int vpfe_config_image_format(struct vpfe_device *vpfe_dev,
-				    v4l2_std_id std_id)
-{
-	struct vpfe_subdev_info *sdinfo = vpfe_dev->current_subdev;
-	struct v4l2_subdev_format fmt = {
-		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
-	};
-	struct v4l2_mbus_framefmt *mbus_fmt = &fmt.format;
-	struct v4l2_pix_format *pix = &vpfe_dev->fmt.fmt.pix;
-	int i, ret;
-
-	for (i = 0; i < ARRAY_SIZE(vpfe_standards); i++) {
-		if (vpfe_standards[i].std_id & std_id) {
-			vpfe_dev->std_info.active_pixels =
-					vpfe_standards[i].width;
-			vpfe_dev->std_info.active_lines =
-					vpfe_standards[i].height;
-			vpfe_dev->std_info.frame_format =
-					vpfe_standards[i].frame_format;
-			vpfe_dev->std_index = i;
-			break;
-		}
-	}
-
-	if (i ==  ARRAY_SIZE(vpfe_standards)) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "standard not supported\n");
-		return -EINVAL;
-	}
-
-	vpfe_dev->crop.top = 0;
-	vpfe_dev->crop.left = 0;
-	vpfe_dev->crop.width = vpfe_dev->std_info.active_pixels;
-	vpfe_dev->crop.height = vpfe_dev->std_info.active_lines;
-	pix->width = vpfe_dev->crop.width;
-	pix->height = vpfe_dev->crop.height;
-
-	/* first field and frame format based on standard frame format */
-	if (vpfe_dev->std_info.frame_format) {
-		pix->field = V4L2_FIELD_INTERLACED;
-		/* assume V4L2_PIX_FMT_UYVY as default */
-		pix->pixelformat = V4L2_PIX_FMT_UYVY;
-		v4l2_fill_mbus_format(mbus_fmt, pix,
-				MEDIA_BUS_FMT_YUYV10_2X10);
-	} else {
-		pix->field = V4L2_FIELD_NONE;
-		/* assume V4L2_PIX_FMT_SBGGR8 */
-		pix->pixelformat = V4L2_PIX_FMT_SBGGR8;
-		v4l2_fill_mbus_format(mbus_fmt, pix,
-				MEDIA_BUS_FMT_SBGGR8_1X8);
-	}
-
-	/* if sub device supports get_fmt, override the defaults */
-	ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev,
-			sdinfo->grp_id, pad, get_fmt, NULL, &fmt);
-
-	if (ret && ret != -ENOIOCTLCMD) {
-		v4l2_err(&vpfe_dev->v4l2_dev,
-			"error in getting get_fmt from sub device\n");
-		return ret;
-	}
-	v4l2_fill_pix_format(pix, mbus_fmt);
-	pix->bytesperline = pix->width * 2;
-	pix->sizeimage = pix->bytesperline * pix->height;
-
-	/* Sets the values in CCDC */
-	ret = vpfe_config_ccdc_image_format(vpfe_dev);
-	if (ret)
-		return ret;
-
-	/* Update the values of sizeimage and bytesperline */
-	pix->bytesperline = ccdc_dev->hw_ops.get_line_length();
-	pix->sizeimage = pix->bytesperline * pix->height;
-
-	return 0;
-}
-
-static int vpfe_initialize_device(struct vpfe_device *vpfe_dev)
-{
-	int ret;
-
-	/* set first input of current subdevice as the current input */
-	vpfe_dev->current_input = 0;
-
-	/* set default standard */
-	vpfe_dev->std_index = 0;
-
-	/* Configure the default format information */
-	ret = vpfe_config_image_format(vpfe_dev,
-				vpfe_standards[vpfe_dev->std_index].std_id);
-	if (ret)
-		return ret;
-
-	/* now open the ccdc device to initialize it */
-	mutex_lock(&ccdc_lock);
-	if (!ccdc_dev) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "ccdc device not registered\n");
-		ret = -ENODEV;
-		goto unlock;
-	}
-
-	if (!try_module_get(ccdc_dev->owner)) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "Couldn't lock ccdc module\n");
-		ret = -ENODEV;
-		goto unlock;
-	}
-	ret = ccdc_dev->hw_ops.open(vpfe_dev->pdev);
-	if (!ret)
-		vpfe_dev->initialized = 1;
-
-	/* Clear all VPFE/CCDC interrupts */
-	if (vpfe_dev->cfg->clr_intr)
-		vpfe_dev->cfg->clr_intr(-1);
-
-unlock:
-	mutex_unlock(&ccdc_lock);
-	return ret;
-}
-
-/*
- * vpfe_open : It creates object of file handle structure and
- * stores it in private_data  member of filepointer
- */
-static int vpfe_open(struct file *file)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-	struct video_device *vdev = video_devdata(file);
-	struct vpfe_fh *fh;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_open\n");
-
-	if (!vpfe_dev->cfg->num_subdevs) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "No decoder registered\n");
-		return -ENODEV;
-	}
-
-	/* Allocate memory for the file handle object */
-	fh = kmalloc(sizeof(*fh), GFP_KERNEL);
-	if (!fh)
-		return -ENOMEM;
-
-	/* store pointer to fh in private_data member of file */
-	file->private_data = fh;
-	fh->vpfe_dev = vpfe_dev;
-	v4l2_fh_init(&fh->fh, vdev);
-	mutex_lock(&vpfe_dev->lock);
-	/* If decoder is not initialized. initialize it */
-	if (!vpfe_dev->initialized) {
-		if (vpfe_initialize_device(vpfe_dev)) {
-			mutex_unlock(&vpfe_dev->lock);
-			v4l2_fh_exit(&fh->fh);
-			kfree(fh);
-			return -ENODEV;
-		}
-	}
-	/* Increment device usrs counter */
-	vpfe_dev->usrs++;
-	/* Set io_allowed member to false */
-	fh->io_allowed = 0;
-	v4l2_fh_add(&fh->fh);
-	mutex_unlock(&vpfe_dev->lock);
-	return 0;
-}
-
-static void vpfe_schedule_next_buffer(struct vpfe_device *vpfe_dev)
-{
-	unsigned long addr;
-
-	vpfe_dev->next_frm = list_entry(vpfe_dev->dma_queue.next,
-					struct videobuf_buffer, queue);
-	list_del(&vpfe_dev->next_frm->queue);
-	vpfe_dev->next_frm->state = VIDEOBUF_ACTIVE;
-	addr = videobuf_to_dma_contig(vpfe_dev->next_frm);
-
-	ccdc_dev->hw_ops.setfbaddr(addr);
-}
-
-static void vpfe_schedule_bottom_field(struct vpfe_device *vpfe_dev)
-{
-	unsigned long addr;
-
-	addr = videobuf_to_dma_contig(vpfe_dev->cur_frm);
-	addr += vpfe_dev->field_off;
-	ccdc_dev->hw_ops.setfbaddr(addr);
-}
-
-static void vpfe_process_buffer_complete(struct vpfe_device *vpfe_dev)
-{
-	vpfe_dev->cur_frm->ts = ktime_get_ns();
-	vpfe_dev->cur_frm->state = VIDEOBUF_DONE;
-	vpfe_dev->cur_frm->size = vpfe_dev->fmt.fmt.pix.sizeimage;
-	wake_up_interruptible(&vpfe_dev->cur_frm->done);
-	vpfe_dev->cur_frm = vpfe_dev->next_frm;
-}
-
-/* ISR for VINT0*/
-static irqreturn_t vpfe_isr(int irq, void *dev_id)
-{
-	struct vpfe_device *vpfe_dev = dev_id;
-	enum v4l2_field field;
-	int fid;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "\nStarting vpfe_isr...\n");
-	field = vpfe_dev->fmt.fmt.pix.field;
-
-	/* if streaming not started, don't do anything */
-	if (!vpfe_dev->started)
-		goto clear_intr;
-
-	/* only for 6446 this will be applicable */
-	if (ccdc_dev->hw_ops.reset)
-		ccdc_dev->hw_ops.reset();
-
-	if (field == V4L2_FIELD_NONE) {
-		/* handle progressive frame capture */
-		v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
-			"frame format is progressive...\n");
-		if (vpfe_dev->cur_frm != vpfe_dev->next_frm)
-			vpfe_process_buffer_complete(vpfe_dev);
-		goto clear_intr;
-	}
-
-	/* interlaced or TB capture check which field we are in hardware */
-	fid = ccdc_dev->hw_ops.getfid();
-
-	/* switch the software maintained field id */
-	vpfe_dev->field_id ^= 1;
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "field id = %x:%x.\n",
-		fid, vpfe_dev->field_id);
-	if (fid == vpfe_dev->field_id) {
-		/* we are in-sync here,continue */
-		if (fid == 0) {
-			/*
-			 * One frame is just being captured. If the next frame
-			 * is available, release the current frame and move on
-			 */
-			if (vpfe_dev->cur_frm != vpfe_dev->next_frm)
-				vpfe_process_buffer_complete(vpfe_dev);
-			/*
-			 * based on whether the two fields are stored
-			 * interleavely or separately in memory, reconfigure
-			 * the CCDC memory address
-			 */
-			if (field == V4L2_FIELD_SEQ_TB)
-				vpfe_schedule_bottom_field(vpfe_dev);
-			goto clear_intr;
-		}
-		/*
-		 * if one field is just being captured configure
-		 * the next frame get the next frame from the empty
-		 * queue if no frame is available hold on to the
-		 * current buffer
-		 */
-		spin_lock(&vpfe_dev->dma_queue_lock);
-		if (!list_empty(&vpfe_dev->dma_queue) &&
-		    vpfe_dev->cur_frm == vpfe_dev->next_frm)
-			vpfe_schedule_next_buffer(vpfe_dev);
-		spin_unlock(&vpfe_dev->dma_queue_lock);
-	} else if (fid == 0) {
-		/*
-		 * out of sync. Recover from any hardware out-of-sync.
-		 * May loose one frame
-		 */
-		vpfe_dev->field_id = fid;
-	}
-clear_intr:
-	if (vpfe_dev->cfg->clr_intr)
-		vpfe_dev->cfg->clr_intr(irq);
-
-	return IRQ_HANDLED;
-}
-
-/* vdint1_isr - isr handler for VINT1 interrupt */
-static irqreturn_t vdint1_isr(int irq, void *dev_id)
-{
-	struct vpfe_device *vpfe_dev = dev_id;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "\nInside vdint1_isr...\n");
-
-	/* if streaming not started, don't do anything */
-	if (!vpfe_dev->started) {
-		if (vpfe_dev->cfg->clr_intr)
-			vpfe_dev->cfg->clr_intr(irq);
-		return IRQ_HANDLED;
-	}
-
-	spin_lock(&vpfe_dev->dma_queue_lock);
-	if ((vpfe_dev->fmt.fmt.pix.field == V4L2_FIELD_NONE) &&
-	    !list_empty(&vpfe_dev->dma_queue) &&
-	    vpfe_dev->cur_frm == vpfe_dev->next_frm)
-		vpfe_schedule_next_buffer(vpfe_dev);
-	spin_unlock(&vpfe_dev->dma_queue_lock);
-
-	if (vpfe_dev->cfg->clr_intr)
-		vpfe_dev->cfg->clr_intr(irq);
-
-	return IRQ_HANDLED;
-}
-
-static void vpfe_detach_irq(struct vpfe_device *vpfe_dev)
-{
-	enum ccdc_frmfmt frame_format;
-
-	frame_format = ccdc_dev->hw_ops.get_frame_format();
-	if (frame_format == CCDC_FRMFMT_PROGRESSIVE)
-		free_irq(vpfe_dev->ccdc_irq1, vpfe_dev);
-}
-
-static int vpfe_attach_irq(struct vpfe_device *vpfe_dev)
-{
-	enum ccdc_frmfmt frame_format;
-
-	frame_format = ccdc_dev->hw_ops.get_frame_format();
-	if (frame_format == CCDC_FRMFMT_PROGRESSIVE) {
-		return request_irq(vpfe_dev->ccdc_irq1, vdint1_isr,
-				    0, "vpfe_capture1",
-				    vpfe_dev);
-	}
-	return 0;
-}
-
-/* vpfe_stop_ccdc_capture: stop streaming in ccdc/isif */
-static void vpfe_stop_ccdc_capture(struct vpfe_device *vpfe_dev)
-{
-	vpfe_dev->started = 0;
-	ccdc_dev->hw_ops.enable(0);
-	if (ccdc_dev->hw_ops.enable_out_to_sdram)
-		ccdc_dev->hw_ops.enable_out_to_sdram(0);
-}
-
-/*
- * vpfe_release : This function deletes buffer queue, frees the
- * buffers and the vpfe file  handle
- */
-static int vpfe_release(struct file *file)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-	struct vpfe_fh *fh = file->private_data;
-	struct vpfe_subdev_info *sdinfo;
-	int ret;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_release\n");
-
-	/* Get the device lock */
-	mutex_lock(&vpfe_dev->lock);
-	/* if this instance is doing IO */
-	if (fh->io_allowed) {
-		if (vpfe_dev->started) {
-			sdinfo = vpfe_dev->current_subdev;
-			ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev,
-							 sdinfo->grp_id,
-							 video, s_stream, 0);
-			if (ret && (ret != -ENOIOCTLCMD))
-				v4l2_err(&vpfe_dev->v4l2_dev,
-				"stream off failed in subdev\n");
-			vpfe_stop_ccdc_capture(vpfe_dev);
-			vpfe_detach_irq(vpfe_dev);
-			videobuf_streamoff(&vpfe_dev->buffer_queue);
-		}
-		vpfe_dev->io_usrs = 0;
-		vpfe_dev->numbuffers = config_params.numbuffers;
-		videobuf_stop(&vpfe_dev->buffer_queue);
-		videobuf_mmap_free(&vpfe_dev->buffer_queue);
-	}
-
-	/* Decrement device usrs counter */
-	vpfe_dev->usrs--;
-	v4l2_fh_del(&fh->fh);
-	v4l2_fh_exit(&fh->fh);
-	/* If this is the last file handle */
-	if (!vpfe_dev->usrs) {
-		vpfe_dev->initialized = 0;
-		if (ccdc_dev->hw_ops.close)
-			ccdc_dev->hw_ops.close(vpfe_dev->pdev);
-		module_put(ccdc_dev->owner);
-	}
-	mutex_unlock(&vpfe_dev->lock);
-	file->private_data = NULL;
-	/* Free memory allocated to file handle object */
-	kfree(fh);
-	return 0;
-}
-
-/*
- * vpfe_mmap : It is used to map kernel space buffers
- * into user spaces
- */
-static int vpfe_mmap(struct file *file, struct vm_area_struct *vma)
-{
-	/* Get the device object and file handle object */
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_mmap\n");
-
-	return videobuf_mmap_mapper(&vpfe_dev->buffer_queue, vma);
-}
-
-/*
- * vpfe_poll: It is used for select/poll system call
- */
-static __poll_t vpfe_poll(struct file *file, poll_table *wait)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_poll\n");
-
-	if (vpfe_dev->started)
-		return videobuf_poll_stream(file,
-					    &vpfe_dev->buffer_queue, wait);
-	return 0;
-}
-
-/* vpfe capture driver file operations */
-static const struct v4l2_file_operations vpfe_fops = {
-	.owner = THIS_MODULE,
-	.open = vpfe_open,
-	.release = vpfe_release,
-	.unlocked_ioctl = video_ioctl2,
-	.mmap = vpfe_mmap,
-	.poll = vpfe_poll
-};
-
-/*
- * vpfe_check_format()
- * This function adjust the input pixel format as per hardware
- * capabilities and update the same in pixfmt.
- * Following algorithm used :-
- *
- *	If given pixformat is not in the vpfe list of pix formats or not
- *	supported by the hardware, current value of pixformat in the device
- *	is used
- *	If given field is not supported, then current field is used. If field
- *	is different from current, then it is matched with that from sub device.
- *	Minimum height is 2 lines for interlaced or tb field and 1 line for
- *	progressive. Maximum height is clamped to active active lines of scan
- *	Minimum width is 32 bytes in memory and width is clamped to active
- *	pixels of scan.
- *	bytesperline is a multiple of 32.
- */
-static const struct vpfe_pixel_format *
-	vpfe_check_format(struct vpfe_device *vpfe_dev,
-			  struct v4l2_pix_format *pixfmt)
-{
-	u32 min_height = 1, min_width = 32, max_width, max_height;
-	const struct vpfe_pixel_format *vpfe_pix_fmt;
-	u32 pix;
-	int temp, found;
-
-	vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat);
-	if (!vpfe_pix_fmt) {
-		/*
-		 * use current pixel format in the vpfe device. We
-		 * will find this pix format in the table
-		 */
-		pixfmt->pixelformat = vpfe_dev->fmt.fmt.pix.pixelformat;
-		vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat);
-	}
-
-	/* check if hw supports it */
-	temp = 0;
-	found = 0;
-	while (ccdc_dev->hw_ops.enum_pix(&pix, temp) >= 0) {
-		if (vpfe_pix_fmt->pixelformat == pix) {
-			found = 1;
-			break;
-		}
-		temp++;
-	}
-
-	if (!found) {
-		/* use current pixel format */
-		pixfmt->pixelformat = vpfe_dev->fmt.fmt.pix.pixelformat;
-		/*
-		 * Since this is currently used in the vpfe device, we
-		 * will find this pix format in the table
-		 */
-		vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat);
-	}
-
-	/* check what field format is supported */
-	if (pixfmt->field == V4L2_FIELD_ANY) {
-		/* if field is any, use current value as default */
-		pixfmt->field = vpfe_dev->fmt.fmt.pix.field;
-	}
-
-	/*
-	 * if field is not same as current field in the vpfe device
-	 * try matching the field with the sub device field
-	 */
-	if (vpfe_dev->fmt.fmt.pix.field != pixfmt->field) {
-		/*
-		 * If field value is not in the supported fields, use current
-		 * field used in the device as default
-		 */
-		switch (pixfmt->field) {
-		case V4L2_FIELD_INTERLACED:
-		case V4L2_FIELD_SEQ_TB:
-			/* if sub device is supporting progressive, use that */
-			if (!vpfe_dev->std_info.frame_format)
-				pixfmt->field = V4L2_FIELD_NONE;
-			break;
-		case V4L2_FIELD_NONE:
-			if (vpfe_dev->std_info.frame_format)
-				pixfmt->field = V4L2_FIELD_INTERLACED;
-			break;
-
-		default:
-			/* use current field as default */
-			pixfmt->field = vpfe_dev->fmt.fmt.pix.field;
-			break;
-		}
-	}
-
-	/* Now adjust image resolutions supported */
-	if (pixfmt->field == V4L2_FIELD_INTERLACED ||
-	    pixfmt->field == V4L2_FIELD_SEQ_TB)
-		min_height = 2;
-
-	max_width = vpfe_dev->std_info.active_pixels;
-	max_height = vpfe_dev->std_info.active_lines;
-	min_width /= vpfe_pix_fmt->bpp;
-
-	v4l2_info(&vpfe_dev->v4l2_dev, "width = %d, height = %d, bpp = %d\n",
-		  pixfmt->width, pixfmt->height, vpfe_pix_fmt->bpp);
-
-	pixfmt->width = clamp((pixfmt->width), min_width, max_width);
-	pixfmt->height = clamp((pixfmt->height), min_height, max_height);
-
-	/* If interlaced, adjust height to be a multiple of 2 */
-	if (pixfmt->field == V4L2_FIELD_INTERLACED)
-		pixfmt->height &= (~1);
-	/*
-	 * recalculate bytesperline and sizeimage since width
-	 * and height might have changed
-	 */
-	pixfmt->bytesperline = (((pixfmt->width * vpfe_pix_fmt->bpp) + 31)
-				& ~31);
-	if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12)
-		pixfmt->sizeimage =
-			pixfmt->bytesperline * pixfmt->height +
-			((pixfmt->bytesperline * pixfmt->height) >> 1);
-	else
-		pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height;
-
-	v4l2_info(&vpfe_dev->v4l2_dev, "adjusted width = %d, height = %d, bpp = %d, bytesperline = %d, sizeimage = %d\n",
-		 pixfmt->width, pixfmt->height, vpfe_pix_fmt->bpp,
-		 pixfmt->bytesperline, pixfmt->sizeimage);
-	return vpfe_pix_fmt;
-}
-
-static int vpfe_querycap(struct file *file, void  *priv,
-			       struct v4l2_capability *cap)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querycap\n");
-
-	strscpy(cap->driver, CAPTURE_DRV_NAME, sizeof(cap->driver));
-	strscpy(cap->bus_info, "VPFE", sizeof(cap->bus_info));
-	strscpy(cap->card, vpfe_dev->cfg->card_name, sizeof(cap->card));
-	return 0;
-}
-
-static int vpfe_g_fmt_vid_cap(struct file *file, void *priv,
-				struct v4l2_format *fmt)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_fmt_vid_cap\n");
-	/* Fill in the information about format */
-	*fmt = vpfe_dev->fmt;
-	return 0;
-}
-
-static int vpfe_enum_fmt_vid_cap(struct file *file, void  *priv,
-				   struct v4l2_fmtdesc *fmt)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-	const struct vpfe_pixel_format *pix_fmt;
-	u32 pix;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_enum_fmt_vid_cap\n");
-
-	if (ccdc_dev->hw_ops.enum_pix(&pix, fmt->index) < 0)
-		return -EINVAL;
-
-	/* Fill in the information about format */
-	pix_fmt = vpfe_lookup_pix_format(pix);
-	if (pix_fmt) {
-		fmt->pixelformat = pix_fmt->pixelformat;
-		return 0;
-	}
-	return -EINVAL;
-}
-
-static int vpfe_s_fmt_vid_cap(struct file *file, void *priv,
-				struct v4l2_format *fmt)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-	const struct vpfe_pixel_format *pix_fmts;
-	int ret;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_fmt_vid_cap\n");
-
-	/* If streaming is started, return error */
-	if (vpfe_dev->started) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "Streaming is started\n");
-		return -EBUSY;
-	}
-
-	/* Check for valid frame format */
-	pix_fmts = vpfe_check_format(vpfe_dev, &fmt->fmt.pix);
-	if (!pix_fmts)
-		return -EINVAL;
-
-	/* store the pixel format in the device  object */
-	ret = mutex_lock_interruptible(&vpfe_dev->lock);
-	if (ret)
-		return ret;
-
-	/* First detach any IRQ if currently attached */
-	vpfe_detach_irq(vpfe_dev);
-	vpfe_dev->fmt = *fmt;
-	/* set image capture parameters in the ccdc */
-	ret = vpfe_config_ccdc_image_format(vpfe_dev);
-	mutex_unlock(&vpfe_dev->lock);
-	return ret;
-}
-
-static int vpfe_try_fmt_vid_cap(struct file *file, void *priv,
-				  struct v4l2_format *f)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-	const struct vpfe_pixel_format *pix_fmts;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_try_fmt_vid_cap\n");
-
-	pix_fmts = vpfe_check_format(vpfe_dev, &f->fmt.pix);
-	if (!pix_fmts)
-		return -EINVAL;
-	return 0;
-}
-
-/*
- * vpfe_get_subdev_input_index - Get subdev index and subdev input index for a
- * given app input index
- */
-static int vpfe_get_subdev_input_index(struct vpfe_device *vpfe_dev,
-					int *subdev_index,
-					int *subdev_input_index,
-					int app_input_index)
-{
-	struct vpfe_config *cfg = vpfe_dev->cfg;
-	struct vpfe_subdev_info *sdinfo;
-	int i, j = 0;
-
-	for (i = 0; i < cfg->num_subdevs; i++) {
-		sdinfo = &cfg->sub_devs[i];
-		if (app_input_index < (j + sdinfo->num_inputs)) {
-			*subdev_index = i;
-			*subdev_input_index = app_input_index - j;
-			return 0;
-		}
-		j += sdinfo->num_inputs;
-	}
-	return -EINVAL;
-}
-
-/*
- * vpfe_get_app_input - Get app input index for a given subdev input index
- * driver stores the input index of the current sub device and translate it
- * when application request the current input
- */
-static int vpfe_get_app_input_index(struct vpfe_device *vpfe_dev,
-				    int *app_input_index)
-{
-	struct vpfe_config *cfg = vpfe_dev->cfg;
-	struct vpfe_subdev_info *sdinfo;
-	int i, j = 0;
-
-	for (i = 0; i < cfg->num_subdevs; i++) {
-		sdinfo = &cfg->sub_devs[i];
-		if (!strcmp(sdinfo->name, vpfe_dev->current_subdev->name)) {
-			if (vpfe_dev->current_input >= sdinfo->num_inputs)
-				return -1;
-			*app_input_index = j + vpfe_dev->current_input;
-			return 0;
-		}
-		j += sdinfo->num_inputs;
-	}
-	return -EINVAL;
-}
-
-static int vpfe_enum_input(struct file *file, void *priv,
-				 struct v4l2_input *inp)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-	struct vpfe_subdev_info *sdinfo;
-	int subdev, index ;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_enum_input\n");
-
-	if (vpfe_get_subdev_input_index(vpfe_dev,
-					&subdev,
-					&index,
-					inp->index) < 0) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "input information not found for the subdev\n");
-		return -EINVAL;
-	}
-	sdinfo = &vpfe_dev->cfg->sub_devs[subdev];
-	*inp = sdinfo->inputs[index];
-	return 0;
-}
-
-static int vpfe_g_input(struct file *file, void *priv, unsigned int *index)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_input\n");
-
-	return vpfe_get_app_input_index(vpfe_dev, index);
-}
-
-
-static int vpfe_s_input(struct file *file, void *priv, unsigned int index)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-	struct v4l2_subdev *sd;
-	struct vpfe_subdev_info *sdinfo;
-	int subdev_index, inp_index;
-	struct vpfe_route *route;
-	u32 input, output;
-	int ret;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_input\n");
-
-	ret = mutex_lock_interruptible(&vpfe_dev->lock);
-	if (ret)
-		return ret;
-
-	/*
-	 * If streaming is started return device busy
-	 * error
-	 */
-	if (vpfe_dev->started) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "Streaming is on\n");
-		ret = -EBUSY;
-		goto unlock_out;
-	}
-	ret = vpfe_get_subdev_input_index(vpfe_dev,
-					  &subdev_index,
-					  &inp_index,
-					  index);
-	if (ret < 0) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "invalid input index\n");
-		goto unlock_out;
-	}
-
-	sdinfo = &vpfe_dev->cfg->sub_devs[subdev_index];
-	sd = vpfe_dev->sd[subdev_index];
-	route = &sdinfo->routes[inp_index];
-	if (route && sdinfo->can_route) {
-		input = route->input;
-		output = route->output;
-	} else {
-		input = 0;
-		output = 0;
-	}
-
-	if (sd)
-		ret = v4l2_subdev_call(sd, video, s_routing, input, output, 0);
-
-	if (ret) {
-		v4l2_err(&vpfe_dev->v4l2_dev,
-			"vpfe_doioctl:error in setting input in decoder\n");
-		ret = -EINVAL;
-		goto unlock_out;
-	}
-	vpfe_dev->current_subdev = sdinfo;
-	if (sd)
-		vpfe_dev->v4l2_dev.ctrl_handler = sd->ctrl_handler;
-	vpfe_dev->current_input = index;
-	vpfe_dev->std_index = 0;
-
-	/* set the bus/interface parameter for the sub device in ccdc */
-	ret = ccdc_dev->hw_ops.set_hw_if_params(&sdinfo->ccdc_if_params);
-	if (ret)
-		goto unlock_out;
-
-	/* set the default image parameters in the device */
-	ret = vpfe_config_image_format(vpfe_dev,
-				vpfe_standards[vpfe_dev->std_index].std_id);
-unlock_out:
-	mutex_unlock(&vpfe_dev->lock);
-	return ret;
-}
-
-static int vpfe_querystd(struct file *file, void *priv, v4l2_std_id *std_id)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-	struct vpfe_subdev_info *sdinfo;
-	int ret;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querystd\n");
-
-	ret = mutex_lock_interruptible(&vpfe_dev->lock);
-	sdinfo = vpfe_dev->current_subdev;
-	if (ret)
-		return ret;
-	/* Call querystd function of decoder device */
-	ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
-					 video, querystd, std_id);
-	mutex_unlock(&vpfe_dev->lock);
-	return ret;
-}
-
-static int vpfe_s_std(struct file *file, void *priv, v4l2_std_id std_id)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-	struct vpfe_subdev_info *sdinfo;
-	int ret;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_std\n");
-
-	/* Call decoder driver function to set the standard */
-	ret = mutex_lock_interruptible(&vpfe_dev->lock);
-	if (ret)
-		return ret;
-
-	sdinfo = vpfe_dev->current_subdev;
-	/* If streaming is started, return device busy error */
-	if (vpfe_dev->started) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "streaming is started\n");
-		ret = -EBUSY;
-		goto unlock_out;
-	}
-
-	ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
-					 video, s_std, std_id);
-	if (ret < 0) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "Failed to set standard\n");
-		goto unlock_out;
-	}
-	ret = vpfe_config_image_format(vpfe_dev, std_id);
-
-unlock_out:
-	mutex_unlock(&vpfe_dev->lock);
-	return ret;
-}
-
-static int vpfe_g_std(struct file *file, void *priv, v4l2_std_id *std_id)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_std\n");
-
-	*std_id = vpfe_standards[vpfe_dev->std_index].std_id;
-	return 0;
-}
-/*
- *  Videobuf operations
- */
-static int vpfe_videobuf_setup(struct videobuf_queue *vq,
-				unsigned int *count,
-				unsigned int *size)
-{
-	struct vpfe_fh *fh = vq->priv_data;
-	struct vpfe_device *vpfe_dev = fh->vpfe_dev;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_setup\n");
-	*size = vpfe_dev->fmt.fmt.pix.sizeimage;
-	if (vpfe_dev->memory == V4L2_MEMORY_MMAP &&
-		vpfe_dev->fmt.fmt.pix.sizeimage > config_params.device_bufsize)
-		*size = config_params.device_bufsize;
-
-	if (*count < config_params.min_numbuffers)
-		*count = config_params.min_numbuffers;
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
-		"count=%d, size=%d\n", *count, *size);
-	return 0;
-}
-
-static int vpfe_videobuf_prepare(struct videobuf_queue *vq,
-				struct videobuf_buffer *vb,
-				enum v4l2_field field)
-{
-	struct vpfe_fh *fh = vq->priv_data;
-	struct vpfe_device *vpfe_dev = fh->vpfe_dev;
-	unsigned long addr;
-	int ret;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_prepare\n");
-
-	/* If buffer is not initialized, initialize it */
-	if (VIDEOBUF_NEEDS_INIT == vb->state) {
-		vb->width = vpfe_dev->fmt.fmt.pix.width;
-		vb->height = vpfe_dev->fmt.fmt.pix.height;
-		vb->size = vpfe_dev->fmt.fmt.pix.sizeimage;
-		vb->field = field;
-
-		ret = videobuf_iolock(vq, vb, NULL);
-		if (ret < 0)
-			return ret;
-
-		addr = videobuf_to_dma_contig(vb);
-		/* Make sure user addresses are aligned to 32 bytes */
-		if (!ALIGN(addr, 32))
-			return -EINVAL;
-
-		vb->state = VIDEOBUF_PREPARED;
-	}
-	return 0;
-}
-
-static void vpfe_videobuf_queue(struct videobuf_queue *vq,
-				struct videobuf_buffer *vb)
-{
-	/* Get the file handle object and device object */
-	struct vpfe_fh *fh = vq->priv_data;
-	struct vpfe_device *vpfe_dev = fh->vpfe_dev;
-	unsigned long flags;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_queue\n");
-
-	/* add the buffer to the DMA queue */
-	spin_lock_irqsave(&vpfe_dev->dma_queue_lock, flags);
-	list_add_tail(&vb->queue, &vpfe_dev->dma_queue);
-	spin_unlock_irqrestore(&vpfe_dev->dma_queue_lock, flags);
-
-	/* Change state of the buffer */
-	vb->state = VIDEOBUF_QUEUED;
-}
-
-static void vpfe_videobuf_release(struct videobuf_queue *vq,
-				  struct videobuf_buffer *vb)
-{
-	struct vpfe_fh *fh = vq->priv_data;
-	struct vpfe_device *vpfe_dev = fh->vpfe_dev;
-	unsigned long flags;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_videobuf_release\n");
-
-	/*
-	 * We need to flush the buffer from the dma queue since
-	 * they are de-allocated
-	 */
-	spin_lock_irqsave(&vpfe_dev->dma_queue_lock, flags);
-	INIT_LIST_HEAD(&vpfe_dev->dma_queue);
-	spin_unlock_irqrestore(&vpfe_dev->dma_queue_lock, flags);
-	videobuf_dma_contig_free(vq, vb);
-	vb->state = VIDEOBUF_NEEDS_INIT;
-}
-
-static const struct videobuf_queue_ops vpfe_videobuf_qops = {
-	.buf_setup      = vpfe_videobuf_setup,
-	.buf_prepare    = vpfe_videobuf_prepare,
-	.buf_queue      = vpfe_videobuf_queue,
-	.buf_release    = vpfe_videobuf_release,
-};
-
-/*
- * vpfe_reqbufs. currently support REQBUF only once opening
- * the device.
- */
-static int vpfe_reqbufs(struct file *file, void *priv,
-			struct v4l2_requestbuffers *req_buf)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-	struct vpfe_fh *fh = file->private_data;
-	int ret;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_reqbufs\n");
-
-	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != req_buf->type) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buffer type\n");
-		return -EINVAL;
-	}
-
-	ret = mutex_lock_interruptible(&vpfe_dev->lock);
-	if (ret)
-		return ret;
-
-	if (vpfe_dev->io_usrs != 0) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "Only one IO user allowed\n");
-		ret = -EBUSY;
-		goto unlock_out;
-	}
-
-	vpfe_dev->memory = req_buf->memory;
-	videobuf_queue_dma_contig_init(&vpfe_dev->buffer_queue,
-				&vpfe_videobuf_qops,
-				vpfe_dev->pdev,
-				&vpfe_dev->irqlock,
-				req_buf->type,
-				vpfe_dev->fmt.fmt.pix.field,
-				sizeof(struct videobuf_buffer),
-				fh, NULL);
-
-	fh->io_allowed = 1;
-	vpfe_dev->io_usrs = 1;
-	INIT_LIST_HEAD(&vpfe_dev->dma_queue);
-	ret = videobuf_reqbufs(&vpfe_dev->buffer_queue, req_buf);
-unlock_out:
-	mutex_unlock(&vpfe_dev->lock);
-	return ret;
-}
-
-static int vpfe_querybuf(struct file *file, void *priv,
-			 struct v4l2_buffer *buf)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querybuf\n");
-
-	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf->type) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n");
-		return  -EINVAL;
-	}
-
-	if (vpfe_dev->memory != V4L2_MEMORY_MMAP) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid memory\n");
-		return -EINVAL;
-	}
-	/* Call videobuf_querybuf to get information */
-	return videobuf_querybuf(&vpfe_dev->buffer_queue, buf);
-}
-
-static int vpfe_qbuf(struct file *file, void *priv,
-		     struct v4l2_buffer *p)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-	struct vpfe_fh *fh = file->private_data;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_qbuf\n");
-
-	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != p->type) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n");
-		return -EINVAL;
-	}
-
-	/*
-	 * If this file handle is not allowed to do IO,
-	 * return error
-	 */
-	if (!fh->io_allowed) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n");
-		return -EACCES;
-	}
-	return videobuf_qbuf(&vpfe_dev->buffer_queue, p);
-}
-
-static int vpfe_dqbuf(struct file *file, void *priv,
-		      struct v4l2_buffer *buf)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_dqbuf\n");
-
-	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf->type) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n");
-		return -EINVAL;
-	}
-	return videobuf_dqbuf(&vpfe_dev->buffer_queue,
-				      buf, file->f_flags & O_NONBLOCK);
-}
-
-/*
- * vpfe_calculate_offsets : This function calculates buffers offset
- * for top and bottom field
- */
-static void vpfe_calculate_offsets(struct vpfe_device *vpfe_dev)
-{
-	struct v4l2_rect image_win;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_calculate_offsets\n");
-
-	ccdc_dev->hw_ops.get_image_window(&image_win);
-	vpfe_dev->field_off = image_win.height * image_win.width;
-}
-
-/* vpfe_start_ccdc_capture: start streaming in ccdc/isif */
-static void vpfe_start_ccdc_capture(struct vpfe_device *vpfe_dev)
-{
-	ccdc_dev->hw_ops.enable(1);
-	if (ccdc_dev->hw_ops.enable_out_to_sdram)
-		ccdc_dev->hw_ops.enable_out_to_sdram(1);
-	vpfe_dev->started = 1;
-}
-
-/*
- * vpfe_streamon. Assume the DMA queue is not empty.
- * application is expected to call QBUF before calling
- * this ioctl. If not, driver returns error
- */
-static int vpfe_streamon(struct file *file, void *priv,
-			 enum v4l2_buf_type buf_type)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-	struct vpfe_fh *fh = file->private_data;
-	struct vpfe_subdev_info *sdinfo;
-	unsigned long addr;
-	int ret;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_streamon\n");
-
-	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf_type) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n");
-		return -EINVAL;
-	}
-
-	/* If file handle is not allowed IO, return error */
-	if (!fh->io_allowed) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n");
-		return -EACCES;
-	}
-
-	sdinfo = vpfe_dev->current_subdev;
-	ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
-					video, s_stream, 1);
-
-	if (ret && (ret != -ENOIOCTLCMD)) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "stream on failed in subdev\n");
-		return -EINVAL;
-	}
-
-	/* If buffer queue is empty, return error */
-	if (list_empty(&vpfe_dev->buffer_queue.stream)) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "buffer queue is empty\n");
-		return -EIO;
-	}
-
-	/* Call videobuf_streamon to start streaming * in videobuf */
-	ret = videobuf_streamon(&vpfe_dev->buffer_queue);
-	if (ret)
-		return ret;
-
-
-	ret = mutex_lock_interruptible(&vpfe_dev->lock);
-	if (ret)
-		goto streamoff;
-	/* Get the next frame from the buffer queue */
-	vpfe_dev->next_frm = list_entry(vpfe_dev->dma_queue.next,
-					struct videobuf_buffer, queue);
-	vpfe_dev->cur_frm = vpfe_dev->next_frm;
-	/* Remove buffer from the buffer queue */
-	list_del(&vpfe_dev->cur_frm->queue);
-	/* Mark state of the current frame to active */
-	vpfe_dev->cur_frm->state = VIDEOBUF_ACTIVE;
-	/* Initialize field_id and started member */
-	vpfe_dev->field_id = 0;
-	addr = videobuf_to_dma_contig(vpfe_dev->cur_frm);
-
-	/* Calculate field offset */
-	vpfe_calculate_offsets(vpfe_dev);
-
-	if (vpfe_attach_irq(vpfe_dev) < 0) {
-		v4l2_err(&vpfe_dev->v4l2_dev,
-			 "Error in attaching interrupt handle\n");
-		ret = -EFAULT;
-		goto unlock_out;
-	}
-	if (ccdc_dev->hw_ops.configure() < 0) {
-		v4l2_err(&vpfe_dev->v4l2_dev,
-			 "Error in configuring ccdc\n");
-		ret = -EINVAL;
-		goto unlock_out;
-	}
-	ccdc_dev->hw_ops.setfbaddr((unsigned long)(addr));
-	vpfe_start_ccdc_capture(vpfe_dev);
-	mutex_unlock(&vpfe_dev->lock);
-	return ret;
-unlock_out:
-	mutex_unlock(&vpfe_dev->lock);
-streamoff:
-	videobuf_streamoff(&vpfe_dev->buffer_queue);
-	return ret;
-}
-
-static int vpfe_streamoff(struct file *file, void *priv,
-			  enum v4l2_buf_type buf_type)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-	struct vpfe_fh *fh = file->private_data;
-	struct vpfe_subdev_info *sdinfo;
-	int ret;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_streamoff\n");
-
-	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf_type) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n");
-		return -EINVAL;
-	}
-
-	/* If io is allowed for this file handle, return error */
-	if (!fh->io_allowed) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n");
-		return -EACCES;
-	}
-
-	/* If streaming is not started, return error */
-	if (!vpfe_dev->started) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "device started\n");
-		return -EINVAL;
-	}
-
-	ret = mutex_lock_interruptible(&vpfe_dev->lock);
-	if (ret)
-		return ret;
-
-	vpfe_stop_ccdc_capture(vpfe_dev);
-	vpfe_detach_irq(vpfe_dev);
-
-	sdinfo = vpfe_dev->current_subdev;
-	ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
-					video, s_stream, 0);
-
-	if (ret && (ret != -ENOIOCTLCMD))
-		v4l2_err(&vpfe_dev->v4l2_dev, "stream off failed in subdev\n");
-	ret = videobuf_streamoff(&vpfe_dev->buffer_queue);
-	mutex_unlock(&vpfe_dev->lock);
-	return ret;
-}
-
-static int vpfe_g_pixelaspect(struct file *file, void *priv,
-			      int type, struct v4l2_fract *f)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_pixelaspect\n");
-
-	if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-	/* If std_index is invalid, then just return (== 1:1 aspect) */
-	if (vpfe_dev->std_index >= ARRAY_SIZE(vpfe_standards))
-		return 0;
-
-	*f = vpfe_standards[vpfe_dev->std_index].pixelaspect;
-	return 0;
-}
-
-static int vpfe_g_selection(struct file *file, void *priv,
-			    struct v4l2_selection *sel)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_selection\n");
-
-	if (sel->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-
-	switch (sel->target) {
-	case V4L2_SEL_TGT_CROP:
-		sel->r = vpfe_dev->crop;
-		break;
-	case V4L2_SEL_TGT_CROP_DEFAULT:
-	case V4L2_SEL_TGT_CROP_BOUNDS:
-		sel->r.width = vpfe_standards[vpfe_dev->std_index].width;
-		sel->r.height = vpfe_standards[vpfe_dev->std_index].height;
-		break;
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static int vpfe_s_selection(struct file *file, void *priv,
-			    struct v4l2_selection *sel)
-{
-	struct vpfe_device *vpfe_dev = video_drvdata(file);
-	struct v4l2_rect rect = sel->r;
-	int ret;
-
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_selection\n");
-
-	if (sel->type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
-	    sel->target != V4L2_SEL_TGT_CROP)
-		return -EINVAL;
-
-	if (vpfe_dev->started) {
-		/* make sure streaming is not started */
-		v4l2_err(&vpfe_dev->v4l2_dev,
-			"Cannot change crop when streaming is ON\n");
-		return -EBUSY;
-	}
-
-	ret = mutex_lock_interruptible(&vpfe_dev->lock);
-	if (ret)
-		return ret;
-
-	if (rect.top < 0 || rect.left < 0) {
-		v4l2_err(&vpfe_dev->v4l2_dev,
-			"doesn't support negative values for top & left\n");
-		ret = -EINVAL;
-		goto unlock_out;
-	}
-
-	/* adjust the width to 16 pixel boundary */
-	rect.width = ((rect.width + 15) & ~0xf);
-
-	/* make sure parameters are valid */
-	if ((rect.left + rect.width >
-		vpfe_dev->std_info.active_pixels) ||
-	    (rect.top + rect.height >
-		vpfe_dev->std_info.active_lines)) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "Error in S_SELECTION params\n");
-		ret = -EINVAL;
-		goto unlock_out;
-	}
-	ccdc_dev->hw_ops.set_image_window(&rect);
-	vpfe_dev->fmt.fmt.pix.width = rect.width;
-	vpfe_dev->fmt.fmt.pix.height = rect.height;
-	vpfe_dev->fmt.fmt.pix.bytesperline =
-		ccdc_dev->hw_ops.get_line_length();
-	vpfe_dev->fmt.fmt.pix.sizeimage =
-		vpfe_dev->fmt.fmt.pix.bytesperline *
-		vpfe_dev->fmt.fmt.pix.height;
-	vpfe_dev->crop = rect;
-	sel->r = rect;
-unlock_out:
-	mutex_unlock(&vpfe_dev->lock);
-	return ret;
-}
-
-/* vpfe capture ioctl operations */
-static const struct v4l2_ioctl_ops vpfe_ioctl_ops = {
-	.vidioc_querycap	 = vpfe_querycap,
-	.vidioc_g_fmt_vid_cap    = vpfe_g_fmt_vid_cap,
-	.vidioc_enum_fmt_vid_cap = vpfe_enum_fmt_vid_cap,
-	.vidioc_s_fmt_vid_cap    = vpfe_s_fmt_vid_cap,
-	.vidioc_try_fmt_vid_cap  = vpfe_try_fmt_vid_cap,
-	.vidioc_enum_input	 = vpfe_enum_input,
-	.vidioc_g_input		 = vpfe_g_input,
-	.vidioc_s_input		 = vpfe_s_input,
-	.vidioc_querystd	 = vpfe_querystd,
-	.vidioc_s_std		 = vpfe_s_std,
-	.vidioc_g_std		 = vpfe_g_std,
-	.vidioc_reqbufs		 = vpfe_reqbufs,
-	.vidioc_querybuf	 = vpfe_querybuf,
-	.vidioc_qbuf		 = vpfe_qbuf,
-	.vidioc_dqbuf		 = vpfe_dqbuf,
-	.vidioc_streamon	 = vpfe_streamon,
-	.vidioc_streamoff	 = vpfe_streamoff,
-	.vidioc_g_pixelaspect	 = vpfe_g_pixelaspect,
-	.vidioc_g_selection	 = vpfe_g_selection,
-	.vidioc_s_selection	 = vpfe_s_selection,
-};
-
-static struct vpfe_device *vpfe_initialize(void)
-{
-	struct vpfe_device *vpfe_dev;
-
-	/* Default number of buffers should be 3 */
-	if ((numbuffers > 0) &&
-	    (numbuffers < config_params.min_numbuffers))
-		numbuffers = config_params.min_numbuffers;
-
-	/*
-	 * Set buffer size to min buffers size if invalid buffer size is
-	 * given
-	 */
-	if (bufsize < config_params.min_bufsize)
-		bufsize = config_params.min_bufsize;
-
-	config_params.numbuffers = numbuffers;
-
-	if (numbuffers)
-		config_params.device_bufsize = bufsize;
-
-	/* Allocate memory for device objects */
-	vpfe_dev = kzalloc(sizeof(*vpfe_dev), GFP_KERNEL);
-
-	return vpfe_dev;
-}
-
-/*
- * vpfe_probe : This function creates device entries by register
- * itself to the V4L2 driver and initializes fields of each
- * device objects
- */
-static int vpfe_probe(struct platform_device *pdev)
-{
-	struct vpfe_subdev_info *sdinfo;
-	struct vpfe_config *vpfe_cfg;
-	struct resource *res1;
-	struct vpfe_device *vpfe_dev;
-	struct i2c_adapter *i2c_adap;
-	struct video_device *vfd;
-	int ret, i, j;
-	int num_subdevs = 0;
-
-	/* Get the pointer to the device object */
-	vpfe_dev = vpfe_initialize();
-
-	if (!vpfe_dev) {
-		v4l2_err(pdev->dev.driver,
-			"Failed to allocate memory for vpfe_dev\n");
-		return -ENOMEM;
-	}
-
-	vpfe_dev->pdev = &pdev->dev;
-
-	if (!pdev->dev.platform_data) {
-		v4l2_err(pdev->dev.driver, "Unable to get vpfe config\n");
-		ret = -ENODEV;
-		goto probe_free_dev_mem;
-	}
-
-	vpfe_cfg = pdev->dev.platform_data;
-	vpfe_dev->cfg = vpfe_cfg;
-	if (!vpfe_cfg->ccdc || !vpfe_cfg->card_name || !vpfe_cfg->sub_devs) {
-		v4l2_err(pdev->dev.driver, "null ptr in vpfe_cfg\n");
-		ret = -ENOENT;
-		goto probe_free_dev_mem;
-	}
-
-	/* Allocate memory for ccdc configuration */
-	ccdc_cfg = kmalloc(sizeof(*ccdc_cfg), GFP_KERNEL);
-	if (!ccdc_cfg) {
-		ret = -ENOMEM;
-		goto probe_free_dev_mem;
-	}
-
-	mutex_lock(&ccdc_lock);
-
-	strscpy(ccdc_cfg->name, vpfe_cfg->ccdc, sizeof(ccdc_cfg->name));
-	/* Get VINT0 irq resource */
-	res1 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (!res1) {
-		v4l2_err(pdev->dev.driver,
-			 "Unable to get interrupt for VINT0\n");
-		ret = -ENODEV;
-		goto probe_free_ccdc_cfg_mem;
-	}
-	vpfe_dev->ccdc_irq0 = res1->start;
-
-	/* Get VINT1 irq resource */
-	res1 = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
-	if (!res1) {
-		v4l2_err(pdev->dev.driver,
-			 "Unable to get interrupt for VINT1\n");
-		ret = -ENODEV;
-		goto probe_free_ccdc_cfg_mem;
-	}
-	vpfe_dev->ccdc_irq1 = res1->start;
-
-	ret = request_irq(vpfe_dev->ccdc_irq0, vpfe_isr, 0,
-			  "vpfe_capture0", vpfe_dev);
-
-	if (0 != ret) {
-		v4l2_err(pdev->dev.driver, "Unable to request interrupt\n");
-		goto probe_free_ccdc_cfg_mem;
-	}
-
-	vfd = &vpfe_dev->video_dev;
-	/* Initialize field of video device */
-	vfd->release		= video_device_release_empty;
-	vfd->fops		= &vpfe_fops;
-	vfd->ioctl_ops		= &vpfe_ioctl_ops;
-	vfd->tvnorms		= 0;
-	vfd->v4l2_dev		= &vpfe_dev->v4l2_dev;
-	vfd->device_caps	= V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
-	snprintf(vfd->name, sizeof(vfd->name),
-		 "%s_V%d.%d.%d",
-		 CAPTURE_DRV_NAME,
-		 (VPFE_CAPTURE_VERSION_CODE >> 16) & 0xff,
-		 (VPFE_CAPTURE_VERSION_CODE >> 8) & 0xff,
-		 (VPFE_CAPTURE_VERSION_CODE) & 0xff);
-
-	ret = v4l2_device_register(&pdev->dev, &vpfe_dev->v4l2_dev);
-	if (ret) {
-		v4l2_err(pdev->dev.driver,
-			"Unable to register v4l2 device.\n");
-		goto probe_out_release_irq;
-	}
-	v4l2_info(&vpfe_dev->v4l2_dev, "v4l2 device registered\n");
-	spin_lock_init(&vpfe_dev->irqlock);
-	spin_lock_init(&vpfe_dev->dma_queue_lock);
-	mutex_init(&vpfe_dev->lock);
-
-	/* Initialize field of the device objects */
-	vpfe_dev->numbuffers = config_params.numbuffers;
-
-	/* register video device */
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
-		"trying to register vpfe device.\n");
-	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
-		"video_dev=%p\n", &vpfe_dev->video_dev);
-	vpfe_dev->fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	ret = video_register_device(&vpfe_dev->video_dev,
-				    VFL_TYPE_VIDEO, -1);
-
-	if (ret) {
-		v4l2_err(pdev->dev.driver,
-			"Unable to register video device.\n");
-		goto probe_out_v4l2_unregister;
-	}
-
-	v4l2_info(&vpfe_dev->v4l2_dev, "video device registered\n");
-	/* set the driver data in platform device */
-	platform_set_drvdata(pdev, vpfe_dev);
-	/* set driver private data */
-	video_set_drvdata(&vpfe_dev->video_dev, vpfe_dev);
-	i2c_adap = i2c_get_adapter(vpfe_cfg->i2c_adapter_id);
-	num_subdevs = vpfe_cfg->num_subdevs;
-	vpfe_dev->sd = kmalloc_array(num_subdevs,
-				     sizeof(*vpfe_dev->sd),
-				     GFP_KERNEL);
-	if (!vpfe_dev->sd) {
-		ret = -ENOMEM;
-		goto probe_out_video_unregister;
-	}
-
-	for (i = 0; i < num_subdevs; i++) {
-		struct v4l2_input *inps;
-
-		sdinfo = &vpfe_cfg->sub_devs[i];
-
-		/* Load up the subdevice */
-		vpfe_dev->sd[i] =
-			v4l2_i2c_new_subdev_board(&vpfe_dev->v4l2_dev,
-						  i2c_adap,
-						  &sdinfo->board_info,
-						  NULL);
-		if (vpfe_dev->sd[i]) {
-			v4l2_info(&vpfe_dev->v4l2_dev,
-				  "v4l2 sub device %s registered\n",
-				  sdinfo->name);
-			vpfe_dev->sd[i]->grp_id = sdinfo->grp_id;
-			/* update tvnorms from the sub devices */
-			for (j = 0; j < sdinfo->num_inputs; j++) {
-				inps = &sdinfo->inputs[j];
-				vfd->tvnorms |= inps->std;
-			}
-		} else {
-			v4l2_info(&vpfe_dev->v4l2_dev,
-				  "v4l2 sub device %s register fails\n",
-				  sdinfo->name);
-			ret = -ENXIO;
-			goto probe_sd_out;
-		}
-	}
-
-	/* set first sub device as current one */
-	vpfe_dev->current_subdev = &vpfe_cfg->sub_devs[0];
-	vpfe_dev->v4l2_dev.ctrl_handler = vpfe_dev->sd[0]->ctrl_handler;
-
-	/* We have at least one sub device to work with */
-	mutex_unlock(&ccdc_lock);
-	return 0;
-
-probe_sd_out:
-	kfree(vpfe_dev->sd);
-probe_out_video_unregister:
-	video_unregister_device(&vpfe_dev->video_dev);
-probe_out_v4l2_unregister:
-	v4l2_device_unregister(&vpfe_dev->v4l2_dev);
-probe_out_release_irq:
-	free_irq(vpfe_dev->ccdc_irq0, vpfe_dev);
-probe_free_ccdc_cfg_mem:
-	kfree(ccdc_cfg);
-	mutex_unlock(&ccdc_lock);
-probe_free_dev_mem:
-	kfree(vpfe_dev);
-	return ret;
-}
-
-/*
- * vpfe_remove : It un-register device from V4L2 driver
- */
-static int vpfe_remove(struct platform_device *pdev)
-{
-	struct vpfe_device *vpfe_dev = platform_get_drvdata(pdev);
-
-	v4l2_info(pdev->dev.driver, "vpfe_remove\n");
-
-	free_irq(vpfe_dev->ccdc_irq0, vpfe_dev);
-	kfree(vpfe_dev->sd);
-	v4l2_device_unregister(&vpfe_dev->v4l2_dev);
-	video_unregister_device(&vpfe_dev->video_dev);
-	kfree(vpfe_dev);
-	kfree(ccdc_cfg);
-	return 0;
-}
-
-static int vpfe_suspend(struct device *dev)
-{
-	return 0;
-}
-
-static int vpfe_resume(struct device *dev)
-{
-	return 0;
-}
-
-static const struct dev_pm_ops vpfe_dev_pm_ops = {
-	.suspend = vpfe_suspend,
-	.resume = vpfe_resume,
-};
-
-static struct platform_driver vpfe_driver = {
-	.driver = {
-		.name = CAPTURE_DRV_NAME,
-		.pm = &vpfe_dev_pm_ops,
-	},
-	.probe = vpfe_probe,
-	.remove = vpfe_remove,
-};
-
-module_platform_driver(vpfe_driver);
diff --git a/include/media/davinci/vpfe_capture.h b/include/media/davinci/vpfe_capture.h
deleted file mode 100644
index 4ad53031e2f7..000000000000
--- a/include/media/davinci/vpfe_capture.h
+++ /dev/null
@@ -1,177 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2008-2009 Texas Instruments Inc
- */
-
-#ifndef _VPFE_CAPTURE_H
-#define _VPFE_CAPTURE_H
-
-#ifdef __KERNEL__
-
-/* Header files */
-#include <media/v4l2-dev.h>
-#include <linux/videodev2.h>
-#include <linux/clk.h>
-#include <linux/i2c.h>
-#include <media/v4l2-fh.h>
-#include <media/v4l2-ioctl.h>
-#include <media/v4l2-device.h>
-#include <media/videobuf-dma-contig.h>
-#include <media/davinci/vpfe_types.h>
-
-#define VPFE_CAPTURE_NUM_DECODERS        5
-
-/* Macros */
-#define VPFE_MAJOR_RELEASE              0
-#define VPFE_MINOR_RELEASE              0
-#define VPFE_BUILD                      1
-#define VPFE_CAPTURE_VERSION_CODE       ((VPFE_MAJOR_RELEASE << 16) | \
-					(VPFE_MINOR_RELEASE << 8)  | \
-					VPFE_BUILD)
-
-#define CAPTURE_DRV_NAME		"vpfe-capture"
-
-struct vpfe_pixel_format {
-	u32 pixelformat;
-	/* bytes per pixel */
-	int bpp;
-};
-
-struct vpfe_std_info {
-	int active_pixels;
-	int active_lines;
-	/* current frame format */
-	int frame_format;
-};
-
-struct vpfe_route {
-	u32 input;
-	u32 output;
-};
-
-struct vpfe_subdev_info {
-	/* Sub device name */
-	char name[32];
-	/* Sub device group id */
-	int grp_id;
-	/* Number of inputs supported */
-	int num_inputs;
-	/* inputs available at the sub device */
-	struct v4l2_input *inputs;
-	/* Sub dev routing information for each input */
-	struct vpfe_route *routes;
-	/* check if sub dev supports routing */
-	int can_route;
-	/* ccdc bus/interface configuration */
-	struct vpfe_hw_if_param ccdc_if_params;
-	/* i2c subdevice board info */
-	struct i2c_board_info board_info;
-};
-
-struct vpfe_config {
-	/* Number of sub devices connected to vpfe */
-	int num_subdevs;
-	/* i2c bus adapter no */
-	int i2c_adapter_id;
-	/* information about each subdev */
-	struct vpfe_subdev_info *sub_devs;
-	/* evm card info */
-	char *card_name;
-	/* ccdc name */
-	char *ccdc;
-	/* vpfe clock */
-	struct clk *vpssclk;
-	struct clk *slaveclk;
-	/* Function for Clearing the interrupt */
-	void (*clr_intr)(int vdint);
-};
-
-struct vpfe_device {
-	/* V4l2 specific parameters */
-	/* Identifies video device for this channel */
-	struct video_device video_dev;
-	/* sub devices */
-	struct v4l2_subdev **sd;
-	/* vpfe cfg */
-	struct vpfe_config *cfg;
-	/* V4l2 device */
-	struct v4l2_device v4l2_dev;
-	/* parent device */
-	struct device *pdev;
-	/* number of open instances of the channel */
-	u32 usrs;
-	/* Indicates id of the field which is being displayed */
-	u32 field_id;
-	/* flag to indicate whether decoder is initialized */
-	u8 initialized;
-	/* current interface type */
-	struct vpfe_hw_if_param vpfe_if_params;
-	/* ptr to currently selected sub device */
-	struct vpfe_subdev_info *current_subdev;
-	/* current input at the sub device */
-	int current_input;
-	/* Keeps track of the information about the standard */
-	struct vpfe_std_info std_info;
-	/* std index into std table */
-	int std_index;
-	/* CCDC IRQs used when CCDC/ISIF output to SDRAM */
-	unsigned int ccdc_irq0;
-	unsigned int ccdc_irq1;
-	/* number of buffers in fbuffers */
-	u32 numbuffers;
-	/* List of buffer pointers for storing frames */
-	u8 *fbuffers[VIDEO_MAX_FRAME];
-	/* Pointer pointing to current v4l2_buffer */
-	struct videobuf_buffer *cur_frm;
-	/* Pointer pointing to next v4l2_buffer */
-	struct videobuf_buffer *next_frm;
-	/*
-	 * This field keeps track of type of buffer exchange mechanism
-	 * user has selected
-	 */
-	enum v4l2_memory memory;
-	/* Used to store pixel format */
-	struct v4l2_format fmt;
-	/*
-	 * used when IMP is chained to store the crop window which
-	 * is different from the image window
-	 */
-	struct v4l2_rect crop;
-	/* Buffer queue used in video-buf */
-	struct videobuf_queue buffer_queue;
-	/* Queue of filled frames */
-	struct list_head dma_queue;
-	/* Used in video-buf */
-	spinlock_t irqlock;
-	/* IRQ lock for DMA queue */
-	spinlock_t dma_queue_lock;
-	/* lock used to access this structure */
-	struct mutex lock;
-	/* number of users performing IO */
-	u32 io_usrs;
-	/* Indicates whether streaming started */
-	u8 started;
-	/*
-	 * offset where second field starts from the starting of the
-	 * buffer for field separated YCbCr formats
-	 */
-	u32 field_off;
-};
-
-/* File handle structure */
-struct vpfe_fh {
-	struct v4l2_fh fh;
-	struct vpfe_device *vpfe_dev;
-	/* Indicates whether this file handle is doing IO */
-	u8 io_allowed;
-};
-
-struct vpfe_config_params {
-	u8 min_numbuffers;
-	u8 numbuffers;
-	u32 min_bufsize;
-	u32 device_bufsize;
-};
-
-#endif				/* End of __KERNEL__ */
-#endif				/* _DAVINCI_VPFE_H */
-- 
2.29.2





[Index of Archives]     [Linux Driver Development]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux