Hi Philipp,
thanks for the patch.
On 22-08-18, Philipp Zabel wrote:
> Stop parsing upstream neighbors' device-tree endpoints to retrieve the
> media bus configuration. Instead use the get_mbus_config op and throw an
> error if the upstream subdevice does not implement it.
>
> Also drop the corresponding TODO entry and the now unused
> imx_media_get_pad_fwnode() function.
>
> Signed-off-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
feel free to add my:
Tested-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
> ---
> drivers/staging/media/imx/TODO | 12 --
> drivers/staging/media/imx/imx-media-csi.c | 122 +++++++++-----------
> drivers/staging/media/imx/imx-media-utils.c | 33 ------
> drivers/staging/media/imx/imx-media.h | 1 -
> 4 files changed, 56 insertions(+), 112 deletions(-)
>
> diff --git a/drivers/staging/media/imx/TODO b/drivers/staging/media/imx/TODO
> index 5d3a337c8702..62d0426445c2 100644
> --- a/drivers/staging/media/imx/TODO
> +++ b/drivers/staging/media/imx/TODO
> @@ -2,18 +2,6 @@
> - The Frame Interval Monitor could be exported to v4l2-core for
> general use.
>
> -- The CSI subdevice parses its nearest upstream neighbor's device-tree
> - bus config in order to setup the CSI. Laurent Pinchart argues that
> - instead the CSI subdev should call its neighbor's g_mbus_config op
> - (which should be propagated if necessary) to get this info. However
> - Hans Verkuil is planning to remove the g_mbus_config op. For now this
> - driver uses the parsed DT bus config method until this issue is
> - resolved.
> -
> - 2020-06: g_mbus has been removed in favour of the get_mbus_config pad
> - operation which should be used to avoid parsing the remote endpoint
> - configuration.
> -
> - This media driver supports inheriting V4L2 controls to the
> video capture devices, from the subdevices in the capture device's
> pipeline. The controls for each capture device are updated in the
> diff --git a/drivers/staging/media/imx/imx-media-csi.c b/drivers/staging/media/imx/imx-media-csi.c
> index a9377ea8379b..8b5682228d77 100644
> --- a/drivers/staging/media/imx/imx-media-csi.c
> +++ b/drivers/staging/media/imx/imx-media-csi.c
> @@ -97,8 +97,8 @@ struct csi_priv {
> /* the mipi virtual channel number at link validate */
> int vc_num;
>
> - /* the upstream endpoint CSI is receiving from */
> - struct v4l2_fwnode_endpoint upstream_ep;
> + /* media bus config of the upstream subdevice CSI is receiving from */
> + struct v4l2_mbus_config mbus_cfg;
>
> spinlock_t irqlock; /* protect eof_irq handler */
> struct timer_list eof_timeout_timer;
> @@ -125,14 +125,14 @@ static inline struct csi_priv *notifier_to_dev(struct v4l2_async_notifier *n)
> return container_of(n, struct csi_priv, notifier);
> }
>
> -static inline bool is_parallel_bus(struct v4l2_fwnode_endpoint *ep)
> +static inline bool is_parallel_bus(struct v4l2_mbus_config *mbus_cfg)
> {
> - return ep->bus_type != V4L2_MBUS_CSI2_DPHY;
> + return mbus_cfg->type != V4L2_MBUS_CSI2_DPHY;
> }
>
> -static inline bool is_parallel_16bit_bus(struct v4l2_fwnode_endpoint *ep)
> +static inline bool is_parallel_16bit_bus(struct v4l2_mbus_config *mbus_cfg)
> {
> - return is_parallel_bus(ep) && ep->bus.parallel.bus_width >= 16;
> + return is_parallel_bus(mbus_cfg) && mbus_cfg->bus.parallel.bus_width >= 16;
> }
>
> /*
> @@ -145,33 +145,31 @@ static inline bool is_parallel_16bit_bus(struct v4l2_fwnode_endpoint *ep)
> * - the CSI is receiving from an 8-bit parallel bus and the incoming
> * media bus format is other than UYVY8_2X8/YUYV8_2X8.
> */
> -static inline bool requires_passthrough(struct v4l2_fwnode_endpoint *ep,
> +static inline bool requires_passthrough(struct v4l2_mbus_config *mbus_cfg,
> struct v4l2_mbus_framefmt *infmt,
> const struct imx_media_pixfmt *incc)
> {
> - if (ep->bus_type == V4L2_MBUS_BT656) // including BT.1120
> + if (mbus_cfg->type == V4L2_MBUS_BT656) // including BT.1120
> return false;
>
> - return incc->bayer || is_parallel_16bit_bus(ep) ||
> - (is_parallel_bus(ep) &&
> + return incc->bayer || is_parallel_16bit_bus(mbus_cfg) ||
> + (is_parallel_bus(mbus_cfg) &&
> infmt->code != MEDIA_BUS_FMT_UYVY8_2X8 &&
> infmt->code != MEDIA_BUS_FMT_YUYV8_2X8);
> }
>
> /*
> - * Parses the fwnode endpoint from the source pad of the entity
> - * connected to this CSI. This will either be the entity directly
> - * upstream from the CSI-2 receiver, directly upstream from the
> - * video mux, or directly upstream from the CSI itself. The endpoint
> - * is needed to determine the bus type and bus config coming into
> - * the CSI.
> + * Queries the media bus config of the upstream entity that provides data to
> + * the CSI. This will either be the entity directly upstream from the CSI-2
> + * receiver, directly upstream from a video mux, or directly upstream from
> + * the CSI itself.
> */
> -static int csi_get_upstream_endpoint(struct csi_priv *priv,
> - struct v4l2_fwnode_endpoint *ep)
> +static int csi_get_upstream_mbus_config(struct csi_priv *priv,
> + struct v4l2_mbus_config *mbus_cfg)
> {
> - struct fwnode_handle *endpoint;
> - struct v4l2_subdev *sd;
> - struct media_pad *pad;
> + struct v4l2_subdev *sd, *remote_sd;
> + struct media_pad *remote_pad;
> + int ret;
>
> if (!IS_ENABLED(CONFIG_OF))
> return -ENXIO;
> @@ -206,19 +204,21 @@ static int csi_get_upstream_endpoint(struct csi_priv *priv,
> }
>
> /* get source pad of entity directly upstream from sd */
> - pad = imx_media_pipeline_pad(&sd->entity, 0, 0, true);
> - if (!pad)
> - return -ENODEV;
> -
> - endpoint = imx_media_get_pad_fwnode(pad);
> - if (IS_ERR(endpoint))
> - return PTR_ERR(endpoint);
> + remote_pad = media_entity_remote_pad_unique(&sd->entity,
> + MEDIA_PAD_FL_SOURCE);
> + if (IS_ERR(remote_pad))
> + return PTR_ERR(remote_pad);
>
> - v4l2_fwnode_endpoint_parse(endpoint, ep);
> + remote_sd = media_entity_to_v4l2_subdev(remote_pad->entity);
>
> - fwnode_handle_put(endpoint);
> + ret = v4l2_subdev_call(remote_sd, pad, get_mbus_config,
> + remote_pad->index, mbus_cfg);
> + if (ret == -ENOIOCTLCMD)
> + v4l2_err(&priv->sd,
> + "upstream entity %s does not implement get_mbus_config()\n",
> + remote_pad->entity->name);
>
> - return 0;
> + return ret;
> }
>
> static void csi_idmac_put_ipu_resources(struct csi_priv *priv)
> @@ -435,7 +435,7 @@ static int csi_idmac_setup_channel(struct csi_priv *priv)
> image.phys0 = phys[0];
> image.phys1 = phys[1];
>
> - passthrough = requires_passthrough(&priv->upstream_ep, infmt, incc);
> + passthrough = requires_passthrough(&priv->mbus_cfg, infmt, incc);
> passthrough_cycles = 1;
>
> /*
> @@ -708,7 +708,6 @@ static int csi_setup(struct csi_priv *priv)
> {
> struct v4l2_mbus_framefmt *infmt, *outfmt;
> const struct imx_media_pixfmt *incc;
> - struct v4l2_mbus_config mbus_cfg;
> struct v4l2_mbus_framefmt if_fmt;
> struct v4l2_rect crop;
>
> @@ -716,13 +715,6 @@ static int csi_setup(struct csi_priv *priv)
> incc = priv->cc[CSI_SINK_PAD];
> outfmt = &priv->format_mbus[priv->active_output_pad];
>
> - /* compose mbus_config from the upstream endpoint */
> - mbus_cfg.type = priv->upstream_ep.bus_type;
> - if (is_parallel_bus(&priv->upstream_ep))
> - mbus_cfg.bus.parallel = priv->upstream_ep.bus.parallel;
> - else
> - mbus_cfg.bus.mipi_csi2 = priv->upstream_ep.bus.mipi_csi2;
> -
> if_fmt = *infmt;
> crop = priv->crop;
>
> @@ -730,7 +722,7 @@ static int csi_setup(struct csi_priv *priv)
> * if cycles is set, we need to handle this over multiple cycles as
> * generic/bayer data
> */
> - if (is_parallel_bus(&priv->upstream_ep) && incc->cycles) {
> + if (is_parallel_bus(&priv->mbus_cfg) && incc->cycles) {
> if_fmt.width *= incc->cycles;
> crop.width *= incc->cycles;
> }
> @@ -741,7 +733,7 @@ static int csi_setup(struct csi_priv *priv)
> priv->crop.width == 2 * priv->compose.width,
> priv->crop.height == 2 * priv->compose.height);
>
> - ipu_csi_init_interface(priv->csi, &mbus_cfg, &if_fmt, outfmt);
> + ipu_csi_init_interface(priv->csi, &priv->mbus_cfg, &if_fmt, outfmt);
>
> ipu_csi_set_dest(priv->csi, priv->dest);
>
> @@ -769,7 +761,7 @@ static int csi_start(struct csi_priv *priv)
> return ret;
>
> /* Skip first few frames from a BT.656 source */
> - if (priv->upstream_ep.bus_type == V4L2_MBUS_BT656) {
> + if (priv->mbus_cfg.type == V4L2_MBUS_BT656) {
> u32 delay_usec, bad_frames = 20;
>
> delay_usec = DIV_ROUND_UP_ULL((u64)USEC_PER_SEC *
> @@ -1118,7 +1110,7 @@ static int csi_link_validate(struct v4l2_subdev *sd,
> struct v4l2_subdev_format *sink_fmt)
> {
> struct csi_priv *priv = v4l2_get_subdevdata(sd);
> - struct v4l2_fwnode_endpoint upstream_ep = { .bus_type = 0 };
> + struct v4l2_mbus_config mbus_cfg = { .type = 0 };
> bool is_csi2;
> int ret;
>
> @@ -1127,16 +1119,16 @@ static int csi_link_validate(struct v4l2_subdev *sd,
> if (ret)
> return ret;
>
> - ret = csi_get_upstream_endpoint(priv, &upstream_ep);
> + ret = csi_get_upstream_mbus_config(priv, &mbus_cfg);
> if (ret) {
> - v4l2_err(&priv->sd, "failed to find upstream endpoint\n");
> + v4l2_err(&priv->sd, "failed to find upstream media bus configuration\n");
> return ret;
> }
>
> mutex_lock(&priv->lock);
>
> - priv->upstream_ep = upstream_ep;
> - is_csi2 = !is_parallel_bus(&upstream_ep);
> + priv->mbus_cfg = mbus_cfg;
> + is_csi2 = !is_parallel_bus(&mbus_cfg);
> if (is_csi2) {
> /*
> * NOTE! It seems the virtual channels from the mipi csi-2
> @@ -1192,7 +1184,7 @@ static void csi_try_crop(struct csi_priv *priv,
> struct v4l2_rect *crop,
> struct v4l2_subdev_state *sd_state,
> struct v4l2_mbus_framefmt *infmt,
> - struct v4l2_fwnode_endpoint *upstream_ep)
> + struct v4l2_mbus_config *mbus_cfg)
> {
> u32 in_height;
>
> @@ -1216,7 +1208,7 @@ static void csi_try_crop(struct csi_priv *priv,
> * sync, so fix it to NTSC/PAL active lines. NTSC contains
> * 2 extra lines of active video that need to be cropped.
> */
> - if (upstream_ep->bus_type == V4L2_MBUS_BT656 &&
> + if (mbus_cfg->type == V4L2_MBUS_BT656 &&
> (V4L2_FIELD_HAS_BOTH(infmt->field) ||
> infmt->field == V4L2_FIELD_ALTERNATE)) {
> crop->height = in_height;
> @@ -1233,7 +1225,7 @@ static int csi_enum_mbus_code(struct v4l2_subdev *sd,
> struct v4l2_subdev_mbus_code_enum *code)
> {
> struct csi_priv *priv = v4l2_get_subdevdata(sd);
> - struct v4l2_fwnode_endpoint upstream_ep = { .bus_type = 0 };
> + struct v4l2_mbus_config mbus_cfg = { .type = 0 };
> const struct imx_media_pixfmt *incc;
> struct v4l2_mbus_framefmt *infmt;
> int ret = 0;
> @@ -1254,13 +1246,13 @@ static int csi_enum_mbus_code(struct v4l2_subdev *sd,
> break;
> case CSI_SRC_PAD_DIRECT:
> case CSI_SRC_PAD_IDMAC:
> - ret = csi_get_upstream_endpoint(priv, &upstream_ep);
> + ret = csi_get_upstream_mbus_config(priv, &mbus_cfg);
> if (ret) {
> v4l2_err(&priv->sd, "failed to find upstream endpoint\n");
> goto out;
> }
>
> - if (requires_passthrough(&upstream_ep, infmt, incc)) {
> + if (requires_passthrough(&mbus_cfg, infmt, incc)) {
> if (code->index != 0) {
> ret = -EINVAL;
> goto out;
> @@ -1430,7 +1422,7 @@ static void csi_try_field(struct csi_priv *priv,
> }
>
> static void csi_try_fmt(struct csi_priv *priv,
> - struct v4l2_fwnode_endpoint *upstream_ep,
> + struct v4l2_mbus_config *mbus_cfg,
> struct v4l2_subdev_state *sd_state,
> struct v4l2_subdev_format *sdformat,
> struct v4l2_rect *crop,
> @@ -1451,7 +1443,7 @@ static void csi_try_fmt(struct csi_priv *priv,
> sdformat->format.width = compose->width;
> sdformat->format.height = compose->height;
>
> - if (requires_passthrough(upstream_ep, infmt, incc)) {
> + if (requires_passthrough(mbus_cfg, infmt, incc)) {
> sdformat->format.code = infmt->code;
> *cc = incc;
> } else {
> @@ -1501,8 +1493,7 @@ static void csi_try_fmt(struct csi_priv *priv,
> crop->height = sdformat->format.height;
> if (sdformat->format.field == V4L2_FIELD_ALTERNATE)
> crop->height *= 2;
> - csi_try_crop(priv, crop, sd_state, &sdformat->format,
> - upstream_ep);
> + csi_try_crop(priv, crop, sd_state, &sdformat->format, mbus_cfg);
> compose->left = 0;
> compose->top = 0;
> compose->width = crop->width;
> @@ -1520,7 +1511,7 @@ static int csi_set_fmt(struct v4l2_subdev *sd,
> struct v4l2_subdev_format *sdformat)
> {
> struct csi_priv *priv = v4l2_get_subdevdata(sd);
> - struct v4l2_fwnode_endpoint upstream_ep = { .bus_type = 0 };
> + struct v4l2_mbus_config mbus_cfg = { .type = 0 };
> const struct imx_media_pixfmt *cc;
> struct v4l2_mbus_framefmt *fmt;
> struct v4l2_rect *crop, *compose;
> @@ -1529,7 +1520,7 @@ static int csi_set_fmt(struct v4l2_subdev *sd,
> if (sdformat->pad >= CSI_NUM_PADS)
> return -EINVAL;
>
> - ret = csi_get_upstream_endpoint(priv, &upstream_ep);
> + ret = csi_get_upstream_mbus_config(priv, &mbus_cfg);
> if (ret) {
> v4l2_err(&priv->sd, "failed to find upstream endpoint\n");
> return ret;
> @@ -1545,8 +1536,7 @@ static int csi_set_fmt(struct v4l2_subdev *sd,
> crop = __csi_get_crop(priv, sd_state, sdformat->which);
> compose = __csi_get_compose(priv, sd_state, sdformat->which);
>
> - csi_try_fmt(priv, &upstream_ep, sd_state, sdformat, crop, compose,
> - &cc);
> + csi_try_fmt(priv, &mbus_cfg, sd_state, sdformat, crop, compose, &cc);
>
> fmt = __csi_get_fmt(priv, sd_state, sdformat->pad, sdformat->which);
> *fmt = sdformat->format;
> @@ -1563,8 +1553,8 @@ static int csi_set_fmt(struct v4l2_subdev *sd,
> format.pad = pad;
> format.which = sdformat->which;
> format.format = sdformat->format;
> - csi_try_fmt(priv, &upstream_ep, sd_state, &format,
> - NULL, compose, &outcc);
> + csi_try_fmt(priv, &mbus_cfg, sd_state, &format, NULL,
> + compose, &outcc);
>
> outfmt = __csi_get_fmt(priv, sd_state, pad,
> sdformat->which);
> @@ -1652,7 +1642,7 @@ static int csi_set_selection(struct v4l2_subdev *sd,
> struct v4l2_subdev_selection *sel)
> {
> struct csi_priv *priv = v4l2_get_subdevdata(sd);
> - struct v4l2_fwnode_endpoint upstream_ep = { .bus_type = 0 };
> + struct v4l2_mbus_config mbus_cfg = { .type = 0 };
> struct v4l2_mbus_framefmt *infmt;
> struct v4l2_rect *crop, *compose;
> int pad, ret;
> @@ -1660,7 +1650,7 @@ static int csi_set_selection(struct v4l2_subdev *sd,
> if (sel->pad != CSI_SINK_PAD)
> return -EINVAL;
>
> - ret = csi_get_upstream_endpoint(priv, &upstream_ep);
> + ret = csi_get_upstream_mbus_config(priv, &mbus_cfg);
> if (ret) {
> v4l2_err(&priv->sd, "failed to find upstream endpoint\n");
> return ret;
> @@ -1691,7 +1681,7 @@ static int csi_set_selection(struct v4l2_subdev *sd,
> goto out;
> }
>
> - csi_try_crop(priv, &sel->r, sd_state, infmt, &upstream_ep);
> + csi_try_crop(priv, &sel->r, sd_state, infmt, &mbus_cfg);
>
> *crop = sel->r;
>
> diff --git a/drivers/staging/media/imx/imx-media-utils.c b/drivers/staging/media/imx/imx-media-utils.c
> index 294c808b2ebe..70dc89d6503b 100644
> --- a/drivers/staging/media/imx/imx-media-utils.c
> +++ b/drivers/staging/media/imx/imx-media-utils.c
> @@ -813,39 +813,6 @@ imx_media_pipeline_video_device(struct media_entity *start_entity,
> }
> EXPORT_SYMBOL_GPL(imx_media_pipeline_video_device);
>
> -/*
> - * Find a fwnode endpoint that maps to the given subdevice's pad.
> - * If there are multiple endpoints that map to the pad, only the
> - * first endpoint encountered is returned.
> - *
> - * On success the refcount of the returned fwnode endpoint is
> - * incremented.
> - */
> -struct fwnode_handle *imx_media_get_pad_fwnode(struct media_pad *pad)
> -{
> - struct fwnode_handle *endpoint;
> - struct v4l2_subdev *sd;
> -
> - if (!is_media_entity_v4l2_subdev(pad->entity))
> - return ERR_PTR(-ENODEV);
> -
> - sd = media_entity_to_v4l2_subdev(pad->entity);
> -
> - fwnode_graph_for_each_endpoint(dev_fwnode(sd->dev), endpoint) {
> - int pad_idx = media_entity_get_fwnode_pad(&sd->entity,
> - endpoint,
> - pad->flags);
> - if (pad_idx < 0)
> - continue;
> -
> - if (pad_idx == pad->index)
> - return endpoint;
> - }
> -
> - return ERR_PTR(-ENODEV);
> -}
> -EXPORT_SYMBOL_GPL(imx_media_get_pad_fwnode);
> -
> /*
> * Turn current pipeline streaming on/off starting from entity.
> */
> diff --git a/drivers/staging/media/imx/imx-media.h b/drivers/staging/media/imx/imx-media.h
> index 1aefbfde3486..573c97b7827a 100644
> --- a/drivers/staging/media/imx/imx-media.h
> +++ b/drivers/staging/media/imx/imx-media.h
> @@ -219,7 +219,6 @@ imx_media_pipeline_subdev(struct media_entity *start_entity, u32 grp_id,
> struct video_device *
> imx_media_pipeline_video_device(struct media_entity *start_entity,
> enum v4l2_buf_type buftype, bool upstream);
> -struct fwnode_handle *imx_media_get_pad_fwnode(struct media_pad *pad);
>
> struct imx_media_dma_buf {
> void *virt;
> --
> 2.30.2
>
>
