Use the new CDC control-line and serial-state defines.
Signed-off-by: Johan Hovold <johan@xxxxxxxxxx>
---
drivers/usb/gadget/function/f_acm.c | 20 +++++---------------
1 file changed, 5 insertions(+), 15 deletions(-)
diff --git a/drivers/usb/gadget/function/f_acm.c b/drivers/usb/gadget/function/f_acm.c
index 411eb489e0ff..cb523f118f04 100644
--- a/drivers/usb/gadget/function/f_acm.c
+++ b/drivers/usb/gadget/function/f_acm.c
@@ -57,18 +57,8 @@ struct f_acm {
/* SetControlLineState request -- CDC 1.1 section 6.2.14 (INPUT) */
u16 port_handshake_bits;
-#define ACM_CTRL_RTS (1 << 1) /* unused with full duplex */
-#define ACM_CTRL_DTR (1 << 0) /* host is ready for data r/w */
-
/* SerialState notification -- CDC 1.1 section 6.3.5 (OUTPUT) */
u16 serial_state;
-#define ACM_CTRL_OVERRUN (1 << 6)
-#define ACM_CTRL_PARITY (1 << 5)
-#define ACM_CTRL_FRAMING (1 << 4)
-#define ACM_CTRL_RI (1 << 3)
-#define ACM_CTRL_BRK (1 << 2)
-#define ACM_CTRL_DSR (1 << 1)
-#define ACM_CTRL_DCD (1 << 0)
};
static inline struct f_acm *func_to_acm(struct usb_function *f)
@@ -387,7 +377,7 @@ static int acm_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
value = 0;
/* FIXME we should not allow data to flow until the
- * host sets the ACM_CTRL_DTR bit; and when it clears
+ * host sets the USB_CDC_CTRL_DTR bit; and when it clears
* that bit, we should return to that no-flow state.
*/
acm->port_handshake_bits = w_value;
@@ -585,7 +575,7 @@ static void acm_connect(struct gserial *port)
{
struct f_acm *acm = port_to_acm(port);
- acm->serial_state |= ACM_CTRL_DSR | ACM_CTRL_DCD;
+ acm->serial_state |= USB_CDC_SERIAL_STATE_DSR | USB_CDC_SERIAL_STATE_DCD;
acm_notify_serial_state(acm);
}
@@ -593,7 +583,7 @@ static void acm_disconnect(struct gserial *port)
{
struct f_acm *acm = port_to_acm(port);
- acm->serial_state &= ~(ACM_CTRL_DSR | ACM_CTRL_DCD);
+ acm->serial_state &= ~(USB_CDC_SERIAL_STATE_DSR | USB_CDC_SERIAL_STATE_DCD);
acm_notify_serial_state(acm);
}
@@ -603,9 +593,9 @@ static int acm_send_break(struct gserial *port, int duration)
u16 state;
state = acm->serial_state;
- state &= ~ACM_CTRL_BRK;
+ state &= ~USB_CDC_SERIAL_STATE_BREAK;
if (duration)
- state |= ACM_CTRL_BRK;
+ state |= USB_CDC_SERIAL_STATE_BREAK;
acm->serial_state = state;
return acm_notify_serial_state(acm);
--
2.35.1
