Re: [PATCH 0/6] RkVDEC HEVC driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Sebastian,

thanks a lot for your work on upstreaming this driver.

See some general comments below.

Implement the HEVC codec variation for the RkVDEC driver. Currently only
the RK3399 is supported, but it is possible to enable the RK3288 as it
also supports this codec.

Based on top of the media tree @ef7fcbbb9eabbe86d2287484bf366dd1821cc6b8
and the HEVC uABI MR by Benjamin Gaignard.
(https://patchwork.linuxtv.org/project/linux-media/list/?series=8360)

Tested with the GStreamer V4L2 HEVC plugin:
(https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1079)

Current Fluster score:
`Ran 131/147 tests successfully               in 278.568 secs`
with
`python3 fluster.py run -d GStreamer-H.265-V4L2SL-Gst1.0 -ts JCT-VC-HEVC_V1 -j1`

failed conformance tests:
- DBLK_D_VIXS_2 (Success on Hantro G2)
- DSLICE_A_HHI_5 (Success on Hantro G2)
- EXT_A_ericsson_4 (Success on Hantro G2)
- PICSIZE_A_Bossen_1 (Hardware limitation)
- PICSIZE_B_Bossen_1 (Hardware limitation)
- PICSIZE_C_Bossen_1 (Hardware limitation)
- PICSIZE_D_Bossen_1 (Hardware limitation)
- PPS_A_qualcomm_7 (Success on Hantro G2)
- SAODBLK_A_MainConcept_4 (Success on Hantro G2)
- SAODBLK_B_MainConcept_4 (Success on Hantro G2)
- SLIST_B_Sony_9 (Success on Hantro G2)
- SLIST_D_Sony_9 (Success on Hantro G2)
- TSUNEQBD_A_MAIN10_Technicolor_2 (Success on Hantro G2)
- VPSSPSPPS_A_MainConcept_1 (Success on Hantro G2)
- WPP_D_ericsson_MAIN10_2 (Fail on Hantro G2)
- WPP_D_ericsson_MAIN_2 (Fail on Hantro G2)

Not tested with FFMpeg so far.

Known issues:
- Unable to reliably decode multiple videos concurrently
- The SAODBLK_* tests timeout if the timeout time in fluster is lower than 120
- Currently the uv_virstride is calculated in a manner that is hardcoded
for the two available formats NV12 and NV15. (@config_registers)

Notable design decisions:
- I opted for a bitfield to represent the PPS memory blob as it is the
perfect tool for that job. It describes the memory layout with any
additional required documentation, is easy to read and a native language
tool for that job
- The RPS memory blob is created using a bitmap implementation, which
uses a common Kernel API to avoid reinventing the wheel and to keep the
code clean.
- I deliberatly opted against the macro solution used in H264, which
declares Macros in mid function and declares the fields of the memory
blob as macros as well. And I would be glad to refactor the H264 code if
desired by the maintainer to use common Kernel APIs and native language
elements.

I fully disagree here: That way the code is much less read-/understandable - your are putting  bits at some random hardcoded positions with not relation to the codec/hardware and expect everyone to read and understand that huge docblock - the code should be more self-explaining and we should at least try to get rid of those hardcoded positions which, btw, will differ for newer versions of that hardware block.

I'm also not sure what makes you call that a "blob": It's configuration of the hardware which in that case isn't put in registers, but in memory.

- The giant static array of cabac values is moved to a separate c file,
I did so because a separate .h file would be incorrect as it doesn't
expose anything of any value for any other file than the rkvdec-hevc.c
file. Other options were:
   - Calculating the values instead of storing the results (doesn't seem
   to be worth it)

I'm not sure "not worth it" should be argument for not doing doing anything in general; especially not if it can explain the relation between the standard and this driver.

Looking at  tables of ITU-T Rec. H.265 "9.3.2.2 Initialization process for context variables" and comparing to the first elements of that huge array: It should be doable.

   - Supply them via firmware (Adding firmware makes the whole software
   way more complicated and the usage of the driver less obvious)

Ignored Checkpatch warnings (as it fits to the current style of the file):
```
WARNING: line length of 162 exceeds 100 columns
#115: FILE: drivers/media/v4l2-core/v4l2-common.c:265:
+               { .format = V4L2_PIX_FMT_NV15,    .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 5, 5, 0, 0 }, .hdiv = 2, .vdiv = 2,

ERROR: trailing statements should be on next line
#128: FILE: drivers/media/v4l2-core/v4l2-ioctl.c:1305:
+       case V4L2_PIX_FMT_NV15:         descr = "10-bit Y/CbCr 4:2:0 (Packed)"; break;
```

v4l2-compliance test:
```
Total for rkvdec device /dev/video3: 46, Succeeded: 46, Failed: 0, Warnings: 0
```

kselftest module run for the bitmap changes:
```
$ sudo insmod /usr/lib/modules/5.19.0-rc3-finalseries/kernel/lib/test_bitmap.ko
[   71.751716] test_bitmap: parselist: 14: input is '0-2047:128/256' OK, Time: 1750
[   71.751787] test_bitmap: bitmap_print_to_pagebuf: input is '0-32767
[   71.751787] ', Time: 6708
[   71.760373] test_bitmap: set_value: 6/6 tests correct
```

Jonas Karlman (2):
   media: v4l2: Add NV15 pixel format
   media: v4l2-common: Add helpers to calculate bytesperline and
     sizeimage

Sebastian Fricke (4):
   bitops: bitmap helper to set variable length values
   staging: media: rkvdec: Add valid pixel format check
   staging: media: rkvdec: Enable S_CTRL IOCTL
   staging: media: rkvdec: Add HEVC backend

  .../media/v4l/pixfmt-yuv-planar.rst           |   53 +
  drivers/media/v4l2-core/v4l2-common.c         |   79 +-
  drivers/media/v4l2-core/v4l2-ioctl.c          |    1 +
  drivers/staging/media/rkvdec/Makefile         |    2 +-
  drivers/staging/media/rkvdec/TODO             |   22 +-
  .../staging/media/rkvdec/rkvdec-hevc-data.c   | 1844 +++++++++++++++++
  drivers/staging/media/rkvdec/rkvdec-hevc.c    |  859 ++++++++
  drivers/staging/media/rkvdec/rkvdec-regs.h    |    1 +
  drivers/staging/media/rkvdec/rkvdec.c         |  182 +-
  drivers/staging/media/rkvdec/rkvdec.h         |    3 +
  include/linux/bitmap.h                        |   39 +
  include/uapi/linux/videodev2.h                |    1 +
  lib/test_bitmap.c                             |   47 +
  13 files changed, 3066 insertions(+), 67 deletions(-)
  create mode 100644 drivers/staging/media/rkvdec/rkvdec-hevc-data.c
  create mode 100644 drivers/staging/media/rkvdec/rkvdec-hevc.c

Regards,

Alex





[Index of Archives]     [Linux Driver Development]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux