Re: [PATCH v8 14/17] media: hantro: Stop using Hantro dedicated control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Le mardi 14 juin 2022 à 18:46 +0200, Benjamin Gaignard a écrit :
> Le 14/06/2022 à 18:23, Nicolas Dufresne a écrit :
> > Le mardi 14 juin 2022 à 17:47 +0200, Hans Verkuil a écrit :
> > > On 6/14/22 17:43, Nicolas Dufresne wrote:
> > > > Le mardi 14 juin 2022 à 15:58 +0200, Hans Verkuil a écrit :
> > > > > On 6/14/22 10:36, Benjamin Gaignard wrote:
> > > > > > The number of bits to skip in the slice header can be computed
> > > > > > in the driver by using sps, pps and decode_params information.
> > > > > > This allow to remove Hantro dedicated control.
> > > > > allow -> makes it possible
> > > > > 
> > > > > > Signed-off-by: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
> > > > > > ---
> > > > > >   drivers/staging/media/hantro/hantro_drv.c     | 36 -----------
> > > > > >   .../staging/media/hantro/hantro_g2_hevc_dec.c | 62 ++++++++++++++++++-
> > > > > >   include/media/hevc-ctrls.h                    | 13 ----
> > > > > >   3 files changed, 61 insertions(+), 50 deletions(-)
> > > > > > 
> > > > > > diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c
> > > > > > index 536c8c374952..5aac3a090480 100644
> > > > > > --- a/drivers/staging/media/hantro/hantro_drv.c
> > > > > > +++ b/drivers/staging/media/hantro/hantro_drv.c
> > > > > > @@ -304,26 +304,6 @@ static int hantro_jpeg_s_ctrl(struct v4l2_ctrl *ctrl)
> > > > > >   	return 0;
> > > > > >   }
> > > > > >   
> > > > > > -static int hantro_hevc_s_ctrl(struct v4l2_ctrl *ctrl)
> > > > > > -{
> > > > > > -	struct hantro_ctx *ctx;
> > > > > > -
> > > > > > -	ctx = container_of(ctrl->handler,
> > > > > > -			   struct hantro_ctx, ctrl_handler);
> > > > > > -
> > > > > > -	vpu_debug(1, "s_ctrl: id = %d, val = %d\n", ctrl->id, ctrl->val);
> > > > > > -
> > > > > > -	switch (ctrl->id) {
> > > > > > -	case V4L2_CID_HANTRO_HEVC_SLICE_HEADER_SKIP:
> > > > > > -		ctx->hevc_dec.ctrls.hevc_hdr_skip_length = ctrl->val;
> > > > > > -		break;
> > > > > > -	default:
> > > > > > -		return -EINVAL;
> > > > > > -	}
> > > > > > -
> > > > > > -	return 0;
> > > > > > -}
> > > > > > -
> > > > > >   static const struct v4l2_ctrl_ops hantro_ctrl_ops = {
> > > > > >   	.try_ctrl = hantro_try_ctrl,
> > > > > >   };
> > > > > > @@ -332,10 +312,6 @@ static const struct v4l2_ctrl_ops hantro_jpeg_ctrl_ops = {
> > > > > >   	.s_ctrl = hantro_jpeg_s_ctrl,
> > > > > >   };
> > > > > >   
> > > > > > -static const struct v4l2_ctrl_ops hantro_hevc_ctrl_ops = {
> > > > > > -	.s_ctrl = hantro_hevc_s_ctrl,
> > > > > > -};
> > > > > > -
> > > > > >   #define HANTRO_JPEG_ACTIVE_MARKERS	(V4L2_JPEG_ACTIVE_MARKER_APP0 | \
> > > > > >   					 V4L2_JPEG_ACTIVE_MARKER_COM | \
> > > > > >   					 V4L2_JPEG_ACTIVE_MARKER_DQT | \
> > > > > > @@ -487,18 +463,6 @@ static const struct hantro_ctrl controls[] = {
> > > > > >   		.cfg = {
> > > > > >   			.id = V4L2_CID_STATELESS_HEVC_SCALING_MATRIX,
> > > > > >   		},
> > > > > > -	}, {
> > > > > > -		.codec = HANTRO_HEVC_DECODER,
> > > > > > -		.cfg = {
> > > > > > -			.id = V4L2_CID_HANTRO_HEVC_SLICE_HEADER_SKIP,
> > > > > > -			.name = "Hantro HEVC slice header skip bytes",
> > > > > > -			.type = V4L2_CTRL_TYPE_INTEGER,
> > > > > > -			.min = 0,
> > > > > > -			.def = 0,
> > > > > > -			.max = 0x100,
> > > > > > -			.step = 1,
> > > > > > -			.ops = &hantro_hevc_ctrl_ops,
> > > > > > -		},
> > > > > >   	}, {
> > > > > >   		.codec = HANTRO_VP9_DECODER,
> > > > > >   		.cfg = {
> > > > > > diff --git a/drivers/staging/media/hantro/hantro_g2_hevc_dec.c b/drivers/staging/media/hantro/hantro_g2_hevc_dec.c
> > > > > > index d28653d04d20..3be8d6e60bf0 100644
> > > > > > --- a/drivers/staging/media/hantro/hantro_g2_hevc_dec.c
> > > > > > +++ b/drivers/staging/media/hantro/hantro_g2_hevc_dec.c
> > > > > > @@ -117,6 +117,66 @@ static void prepare_tile_info_buffer(struct hantro_ctx *ctx)
> > > > > >   		vpu_debug(1, "%s: no chroma!\n", __func__);
> > > > > >   }
> > > > > >   
> > > > > > +static unsigned int ceil_log2(unsigned int v)
> > > > > > +{
> > > > > > +	/* Compute Ceil(Log2(v))
> > > > > > +	 * Derived from branchless code for integer log2(v) from:
> > > > > > +	 * <http://graphics.stanford.edu/~seander/bithacks.html#IntegerLog>
> > > > > > +	 */
> > > > > > +	unsigned int r, shift;
> > > > > > +
> > > > > > +	v--;
> > > > > > +	r = (v > 0xFFFF) << 4;
> > > > > > +	v >>= r;
> > > > > > +	shift = (v > 0xFF) << 3;
> > > > > > +	v >>= shift;
> > > > > > +	r |= shift;
> > > > > > +	shift = (v > 0xF) << 2;
> > > > > > +	v >>= shift;
> > > > > > +	r |= shift;
> > > > > > +	shift = (v > 0x3) << 1;
> > > > > > +	v >>= shift;
> > > > > > +	r |= shift;
> > > > > > +	r |= (v >> 1);
> > > > > > +
> > > > > > +	return r + 1;
> > > > > > +}
> > > > > Isn't this identical to fls(v - 1)? See also lib/math/reciprocal_div.c
> > > > > where this is used.
> > > > Thanks for pointing this out, I was wondering if there was an equivalent, and
> > > > never knew there was a relation between log2() and the "last set bit". Not sure
> > > > about the -1 here though, can you extend ?
> > > Based on how lib/math/reciprocal_div.c did it. Also, the ceil_log2 function
> > > starts with v--, while fls doesn't. That said, it's wise to verify that that
> > > is correct.
> > Just for the reference, from lib/math/reciprocal_div.c:
> > 
> > 	/* ceil(log2(d)) */
> > 	l = fls(d - 1);
> > 
> > Perhaps fls() return position starting from 1 rather then 0 ?
> 
> I have compare the results of ceil_log2(d) vs fls(d-1)
> for values between 2 (because sps->num_short_term_ref_pic_sets > 1) and 16 (the maximum number of frames)
> they are always the same so I will remove ceil_log2() and use fls().

I've also check on my side few samples, and it indeed seems to be exactly the
same.

> 
> Regards,
> Benjamin
> 
> > 
> > Nicolas
> > 
> > > Regards,
> > > 
> > > 	Hans
> > > 
> > > > > Regards,
> > > > > 
> > > > > 	Hans
> > > > > 
> > > > > > +
> > > > > > +static int compute_header_skip_lenght(struct hantro_ctx *ctx)
> > > > > > +{
> > > > > > +	const struct hantro_hevc_dec_ctrls *ctrls = &ctx->hevc_dec.ctrls;
> > > > > > +	const struct v4l2_ctrl_hevc_decode_params *decode_params = ctrls->decode_params;
> > > > > > +	const struct v4l2_ctrl_hevc_sps *sps = ctrls->sps;
> > > > > > +	const struct v4l2_ctrl_hevc_pps *pps = ctrls->pps;
> > > > > > +	int skip = 0;
> > > > > > +
> > > > > > +	if (pps->flags & V4L2_HEVC_PPS_FLAG_OUTPUT_FLAG_PRESENT)
> > > > > > +		/* size of pic_output_flag */
> > > > > > +		skip++;
> > > > > > +
> > > > > > +	if (sps->flags & V4L2_HEVC_SPS_FLAG_SEPARATE_COLOUR_PLANE)
> > > > > > +		/* size of pic_order_cnt_lsb */
> > > > > > +		skip += 2;
> > > > > > +
> > > > > > +	if (!(decode_params->flags & V4L2_HEVC_DECODE_PARAM_FLAG_IDR_PIC)) {
> > > > > > +		/* size of pic_order_cnt_lsb */
> > > > > > +		skip += sps->log2_max_pic_order_cnt_lsb_minus4 + 4;
> > > > > > +
> > > > > > +		/* size of short_term_ref_pic_set_sps_flag */
> > > > > > +		skip++;
> > > > > > +
> > > > > > +		if (decode_params->short_term_ref_pic_set_size)
> > > > > > +			/* size of st_ref_pic_set( num_short_term_ref_pic_sets ) */
> > > > > > +			skip += decode_params->short_term_ref_pic_set_size;
> > > > > > +		else if (sps->num_short_term_ref_pic_sets > 1)
> > > > > > +			skip += ceil_log2(sps->num_short_term_ref_pic_sets);
> > > > > > +
> > > > > > +		skip += decode_params->long_term_ref_pic_set_size;
> > > > > > +	}
> > > > > > +
> > > > > > +	return skip;
> > > > > > +}
> > > > > > +
> > > > > >   static void set_params(struct hantro_ctx *ctx)
> > > > > >   {
> > > > > >   	const struct hantro_hevc_dec_ctrls *ctrls = &ctx->hevc_dec.ctrls;
> > > > > > @@ -134,7 +194,7 @@ static void set_params(struct hantro_ctx *ctx)
> > > > > >   
> > > > > >   	hantro_reg_write(vpu, &g2_output_8_bits, 0);
> > > > > >   
> > > > > > -	hantro_reg_write(vpu, &g2_hdr_skip_length, ctrls->hevc_hdr_skip_length);
> > > > > > +	hantro_reg_write(vpu, &g2_hdr_skip_length, compute_header_skip_lenght(ctx));
> > > > > >   
> > > > > >   	min_log2_cb_size = sps->log2_min_luma_coding_block_size_minus3 + 3;
> > > > > >   	max_log2_ctb_size = min_log2_cb_size + sps->log2_diff_max_min_luma_coding_block_size;
> > > > > > diff --git a/include/media/hevc-ctrls.h b/include/media/hevc-ctrls.h
> > > > > > index d6cb3779d190..efc0412ac41e 100644
> > > > > > --- a/include/media/hevc-ctrls.h
> > > > > > +++ b/include/media/hevc-ctrls.h
> > > > > > @@ -467,17 +467,4 @@ struct v4l2_ctrl_hevc_scaling_matrix {
> > > > > >   	__u8	scaling_list_dc_coef_32x32[2];
> > > > > >   };
> > > > > >   
> > > > > > -/*  MPEG-class control IDs specific to the Hantro driver as defined by V4L2 */
> > > > > > -#define V4L2_CID_CODEC_HANTRO_BASE				(V4L2_CTRL_CLASS_CODEC | 0x1200)
> > > > > > -/*
> > > > > > - * V4L2_CID_HANTRO_HEVC_SLICE_HEADER_SKIP -
> > > > > > - * the number of data (in bits) to skip in the
> > > > > > - * slice segment header.
> > > > > > - * If non-IDR, the bits to be skipped go from syntax element "pic_output_flag"
> > > > > > - * to before syntax element "slice_temporal_mvp_enabled_flag".
> > > > > > - * If IDR, the skipped bits are just "pic_output_flag"
> > > > > > - * (separate_colour_plane_flag is not supported).
> > > > > > - */
> > > > > > -#define V4L2_CID_HANTRO_HEVC_SLICE_HEADER_SKIP	(V4L2_CID_CODEC_HANTRO_BASE + 0)
> > > > > > -
> > > > > >   #endif






[Index of Archives]     [Linux Driver Development]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux