Re: [PATCH v2 15/23] media: rkvdec: h264: Validate and use pic width and height in mbs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Le mardi 05 avril 2022 à 11:44 -0400, Nicolas Dufresne a écrit :
> Le samedi 02 avril 2022 à 08:32 -0300, Ezequiel Garcia a écrit :
> > Hi Nicolas,
> > 
> > On Thu, Mar 31, 2022 at 03:37:17PM -0400, Nicolas Dufresne wrote:
> > > From: Jonas Karlman <jonas@xxxxxxxxx>
> > > 
> > > The width and height in macroblocks is currently configured based on OUTPUT
> > > buffer resolution, this works for frame pictures but can cause issues for
> > > field pictures.
> > > 
> > > When frame_mbs_only_flag is 0 the height in mbs should be height of
> > > the field instead of height of frame.
> > > 
> > > Validate pic_width_in_mbs_minus1 and pic_height_in_map_units_minus1
> > > against OUTPUT buffer resolution and use these values to configure HW.
> > > 
> > > Signed-off-by: Jonas Karlman <jonas@xxxxxxxxx>
> > > Signed-off-by: Nicolas Dufresne <nicolas.dufresne@xxxxxxxxxxxxx>
> > > Reviewed-by: Sebastian Fricke <sebastian.fricke@xxxxxxxxxxxxx>
> > > ---
> > >  drivers/staging/media/rkvdec/rkvdec-h264.c |  4 ++--
> > >  drivers/staging/media/rkvdec/rkvdec.c      | 10 ++++++++++
> > >  2 files changed, 12 insertions(+), 2 deletions(-)
> > > 
> > > diff --git a/drivers/staging/media/rkvdec/rkvdec-h264.c b/drivers/staging/media/rkvdec/rkvdec-h264.c
> > > index 8d44a884a52e..a42cf19bcc6d 100644
> > > --- a/drivers/staging/media/rkvdec/rkvdec-h264.c
> > > +++ b/drivers/staging/media/rkvdec/rkvdec-h264.c
> > > @@ -672,8 +672,8 @@ static void assemble_hw_pps(struct rkvdec_ctx *ctx,
> > >  		  LOG2_MAX_PIC_ORDER_CNT_LSB_MINUS4);
> > >  	WRITE_PPS(!!(sps->flags & V4L2_H264_SPS_FLAG_DELTA_PIC_ORDER_ALWAYS_ZERO),
> > >  		  DELTA_PIC_ORDER_ALWAYS_ZERO_FLAG);
> > > -	WRITE_PPS(DIV_ROUND_UP(ctx->coded_fmt.fmt.pix_mp.width, 16), PIC_WIDTH_IN_MBS);
> > > -	WRITE_PPS(DIV_ROUND_UP(ctx->coded_fmt.fmt.pix_mp.height, 16), PIC_HEIGHT_IN_MBS);
> > 
> > Please add a comment so we don't forget why we use the bitstream
> > fields here.
> 
> And perhaps I should clarify that only the height will vary. It remains nice if
> we can decode smaller images into larger image/format, that will be needed to
> handle the sub-layers in SVC (these are not to be displayed, so we don't care
> much about the output stride and all). So that is also an improvement.
> 
> > 
> > > +	WRITE_PPS(sps->pic_width_in_mbs_minus1 + 1, PIC_WIDTH_IN_MBS);
> > > +	WRITE_PPS(sps->pic_height_in_map_units_minus1 + 1, PIC_HEIGHT_IN_MBS);
> > >  	WRITE_PPS(!!(sps->flags & V4L2_H264_SPS_FLAG_FRAME_MBS_ONLY),
> > >  		  FRAME_MBS_ONLY_FLAG);
> > >  	WRITE_PPS(!!(sps->flags & V4L2_H264_SPS_FLAG_MB_ADAPTIVE_FRAME_FIELD),
> > > diff --git a/drivers/staging/media/rkvdec/rkvdec.c b/drivers/staging/media/rkvdec/rkvdec.c
> > > index 2df8cf4883e2..1b805710e195 100644
> > > --- a/drivers/staging/media/rkvdec/rkvdec.c
> > > +++ b/drivers/staging/media/rkvdec/rkvdec.c
> > > @@ -29,8 +29,11 @@
> > >  
> > >  static int rkvdec_try_ctrl(struct v4l2_ctrl *ctrl)
> > >  {
> > > +	struct rkvdec_ctx *ctx = container_of(ctrl->handler, struct rkvdec_ctx, ctrl_hdl);
> > > +
> > >  	if (ctrl->id == V4L2_CID_STATELESS_H264_SPS) {
> > >  		const struct v4l2_ctrl_h264_sps *sps = ctrl->p_new.p_h264_sps;
> > > +		unsigned int width, height;
> > >  		/*
> > >  		 * TODO: The hardware supports 10-bit and 4:2:2 profiles,
> > >  		 * but it's currently broken in the driver.
> > > @@ -45,6 +48,13 @@ static int rkvdec_try_ctrl(struct v4l2_ctrl *ctrl)
> > >  		if (sps->bit_depth_luma_minus8 != 0)
> > >  			/* Only 8-bit is supported */
> > >  			return -EINVAL;
> > > +
> > > +		width = (sps->pic_width_in_mbs_minus1 + 1) * 16;
> > > +		height = (sps->pic_height_in_map_units_minus1 + 1) * 16;
> > > +
> > 
> > Let's please add a comment here, clarifying it's legal to check
> > the coded format (OUTPUT queue format) at .try_ctrl time,
> > because the stateless decoder specification [1] mandates
> > S_FMT on the OUTPUT queue, before passing the SPS/PPS controls.
> 
> Indeed, though I come to see some flaw in the validation. First, the height
> formula shall be base on formula 7-18 from the spec:
> 
>   FrameHeightInMbs = ( 2 − frame_mbs_only_flag ) * PicHeightInMapUnits
> 
> So would be
> 
> +		height = (sps->pic_height_in_map_units_minus1 + 1) * 16;
> +		if (sps->flags & V4L2_H264_SPS_FLAG_FRAME_MBS_ONLY)
> +			height *= 2;

Oops, I meant:


+		if (!(sps->flags & V4L2_H264_SPS_FLAG_FRAME_MBS_ONLY))
+			height *= 2;


> 
> As this driver do interleaved interlaced buffer, not alternate. Finally, we
> should validate this again at STREAMON, since userland may have simply omitted
> to set the SPS at all. I'll try to improve this and drop the review tag to
> ensure this get fully reviewed again.
> 
> > 
> > [1] https://www.kernel.org/doc/html/latest/userspace-api/media/v4l/dev-stateless-decoder.html
> > 
> > > +		if (width > ctx->coded_fmt.fmt.pix_mp.width ||
> > > +		    height > ctx->coded_fmt.fmt.pix_mp.height)
> > 
> > Can you add a debug message or error message?
> > These silent errors tend to get super hard to track.
> > 
> > With these changes:
> > 
> > Reviewed-by: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxxxxxxxxx>
> > 
> > Thanks,
> > Ezequiel
> 






[Index of Archives]     [Linux Driver Development]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux