[PATCH v1 19/24] media: rkvdec-h264: Add field decoding support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This makes use of the new feature in the reference builder to program
up to 32 references when doing field decoding. It also signals the
parity (top of bottom) of the field to the hardware.

Signed-off-by: Nicolas Dufresne <nicolas.dufresne@xxxxxxxxxxxxx>
---
 drivers/staging/media/rkvdec/rkvdec-h264.c | 48 ++++++++++------------
 1 file changed, 21 insertions(+), 27 deletions(-)

diff --git a/drivers/staging/media/rkvdec/rkvdec-h264.c b/drivers/staging/media/rkvdec/rkvdec-h264.c
index ec52b195bbd7..891c48bf6a51 100644
--- a/drivers/staging/media/rkvdec/rkvdec-h264.c
+++ b/drivers/staging/media/rkvdec/rkvdec-h264.c
@@ -97,13 +97,10 @@ struct rkvdec_h264_priv_tbl {
 	u8 err_info[RKV_ERROR_INFO_SIZE];
 };
 
-#define RKVDEC_H264_DPB_SIZE 16
-
 struct rkvdec_h264_reflists {
 	struct v4l2_h264_reference p[V4L2_H264_REF_LIST_LEN];
 	struct v4l2_h264_reference b0[V4L2_H264_REF_LIST_LEN];
 	struct v4l2_h264_reference b1[V4L2_H264_REF_LIST_LEN];
-	u8 num_valid;
 };
 
 struct rkvdec_h264_run {
@@ -738,23 +735,26 @@ static void lookup_ref_buf_idx(struct rkvdec_ctx *ctx,
 		struct vb2_queue *cap_q = &m2m_ctx->cap_q_ctx.q;
 		int buf_idx = -1;
 
-		if (dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_ACTIVE)
+		if (dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_ACTIVE) {
 			buf_idx = vb2_find_timestamp(cap_q,
 						     dpb[i].reference_ts, 0);
+			if (buf_idx < 0)
+				pr_debug("No buffer for reference_ts %llu",
+					 dpb[i].reference_ts);
+		}
 
 		run->ref_buf_idx[i] = buf_idx;
 	}
 }
 
 static void assemble_hw_rps(struct rkvdec_ctx *ctx,
+			    struct v4l2_h264_reflist_builder *builder,
 			    struct rkvdec_h264_run *run)
 {
 	const struct v4l2_ctrl_h264_decode_params *dec_params = run->decode_params;
 	const struct v4l2_h264_dpb_entry *dpb = dec_params->dpb;
 	struct rkvdec_h264_ctx *h264_ctx = ctx->priv;
-	const struct v4l2_ctrl_h264_sps *sps = run->sps;
 	struct rkvdec_h264_priv_tbl *priv_tbl = h264_ctx->priv_tbl.cpu;
-	u32 max_frame_num = 1 << (sps->log2_max_frame_num_minus4 + 4);
 
 	u32 *hw_rps = priv_tbl->rps;
 	u32 i, j;
@@ -772,37 +772,36 @@ static void assemble_hw_rps(struct rkvdec_ctx *ctx,
 		if (!(dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_ACTIVE))
 			continue;
 
-		if (dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM ||
-		    dpb[i].frame_num <= dec_params->frame_num) {
-			p[i] = dpb[i].frame_num;
-			continue;
-		}
-
-		p[i] = dpb[i].frame_num - max_frame_num;
+		p[i] = builder->refs[i].frame_num;
 	}
 
 	for (j = 0; j < RKVDEC_NUM_REFLIST; j++) {
-		for (i = 0; i < h264_ctx->reflists.num_valid; i++) {
-			u8 dpb_valid = run->ref_buf_idx[i] >= 0;
-			u8 idx = 0;
+		for (i = 0; i < builder->num_valid; i++) {
+			struct v4l2_h264_reference *ref;
+			u8 dpb_valid;
+			u8 bottom;
 
 			switch (j) {
 			case 0:
-				idx = h264_ctx->reflists.p[i].index;
+				ref = &h264_ctx->reflists.p[i];
 				break;
 			case 1:
-				idx = h264_ctx->reflists.b0[i].index;
+				ref = &h264_ctx->reflists.b0[i];
 				break;
 			case 2:
-				idx = h264_ctx->reflists.b1[i].index;
+				ref = &h264_ctx->reflists.b1[i];
 				break;
 			}
 
-			if (idx >= ARRAY_SIZE(dec_params->dpb))
+			if (WARN_ON(ref->index >= ARRAY_SIZE(dec_params->dpb)))
 				continue;
 
+			dpb_valid = run->ref_buf_idx[ref->index] >= 0;
+			bottom = ref->fields == V4L2_H264_BOTTOM_FIELD_REF;
+
 			set_ps_field(hw_rps, DPB_INFO(i, j),
-				     idx | dpb_valid << 4);
+				     ref->index | dpb_valid << 4);
+			set_ps_field(hw_rps, BOTTOM_FLAG(i, j), bottom);
 		}
 	}
 }
@@ -990,10 +989,6 @@ static void config_registers(struct rkvdec_ctx *ctx,
 				       rkvdec->regs + RKVDEC_REG_H264_BASE_REFER15);
 	}
 
-	/*
-	 * Since support frame mode only
-	 * top_field_order_cnt is the same as bottom_field_order_cnt
-	 */
 	reg = RKVDEC_CUR_POC(dec_params->top_field_order_cnt);
 	writel_relaxed(reg, rkvdec->regs + RKVDEC_REG_CUR_POC0);
 
@@ -1109,7 +1104,6 @@ static int rkvdec_h264_run(struct rkvdec_ctx *ctx)
 	/* Build the P/B{0,1} ref lists. */
 	v4l2_h264_init_reflist_builder(&reflist_builder, run.decode_params,
 				       run.sps, run.decode_params->dpb);
-	h264_ctx->reflists.num_valid = reflist_builder.num_valid;
 	v4l2_h264_build_p_ref_list(&reflist_builder, h264_ctx->reflists.p);
 	v4l2_h264_build_b_ref_lists(&reflist_builder, h264_ctx->reflists.b0,
 				    h264_ctx->reflists.b1);
@@ -1117,7 +1111,7 @@ static int rkvdec_h264_run(struct rkvdec_ctx *ctx)
 	assemble_hw_scaling_list(ctx, &run);
 	assemble_hw_pps(ctx, &run);
 	lookup_ref_buf_idx(ctx, &run);
-	assemble_hw_rps(ctx, &run);
+	assemble_hw_rps(ctx, &reflist_builder, &run);
 	config_registers(ctx, &run);
 
 	rkvdec_run_postamble(ctx, &run.base);
-- 
2.34.1





[Index of Archives]     [Linux Driver Development]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux