Add support for the BGR888_1X24 image formats.
No existing media bus codes describe exactly the way data is transferred
on the CSI-2 bus. This is not a new issue, the CSI-2 YUV422 8-bit format
is described by MEDIA_BUS_FMT_UYVY8_1X16 which is an arbitrary
convention and not an exact match. Use the MEDIA_BUS_FMT_BGR888_1X24 to
follow the same convention, based on the order in which bits are
transmitted over the CSI-2 bus.
Signed-off-by: Jacopo Mondi <jacopo@xxxxxxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
drivers/media/platform/imx/imx-mipi-csis.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/media/platform/imx/imx-mipi-csis.c b/drivers/media/platform/imx/imx-mipi-csis.c
index 46055b5f8412..a05ab151bebc 100644
--- a/drivers/media/platform/imx/imx-mipi-csis.c
+++ b/drivers/media/platform/imx/imx-mipi-csis.c
@@ -365,6 +365,10 @@ static const struct csis_pix_format mipi_csis_formats[] = {
.code = MEDIA_BUS_FMT_RGB565_1X16,
.data_type = MIPI_CSI2_DATA_TYPE_RGB565,
.width = 16,
+ }, {
+ .code = MEDIA_BUS_FMT_BGR888_1X24,
+ .data_type = MIPI_CSI2_DATA_TYPE_RGB888,
+ .width = 24,
},
/* RAW (Bayer and greyscale) formats. */
{
--
2.35.0
