Re: [PATCH v2 05/66] dt-bindings: sun6i-a31-mipi-dphy: Add optional direction property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Feb 05, 2022 at 07:53:28PM +0100, Paul Kocialkowski wrote:
> The Allwinner A31 MIPI D-PHY block supports both tx and rx directions,
> although each instance of the block is meant to be used in one
> direction only. There will typically be one instance for MIPI DSI and
> one for MIPI CSI-2 (it seems unlikely to ever see a shared instance).
> 
> Describe the direction with a new allwinner,direction property.
> For backwards compatibility, the property is optional and tx mode
> should be assumed by default.
> 
> Signed-off-by: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx>
> ---
>  .../bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml  | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml
> index d0b541a461f3..22636c9fdab8 100644
> --- a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml
> +++ b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml
> @@ -37,6 +37,18 @@ properties:
>    resets:
>      maxItems: 1
>  
> +  allwinner,direction:
> +    $ref: '/schemas/types.yaml#/definitions/string'
> +    description: |
> +      Direction of the D-PHY:
> +      - "rx" for receiving (e.g. when used with MIPI CSI-2);
> +      - "tx" for transmitting (e.g. when used with MIPI DSI).
> +
> +    enum:
> +      - tx
> +      - rx
> +    default: tx

Can you the phy mode to imply the direction?

Rob




[Index of Archives]     [Linux Driver Development]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux