Re: [PATCH v2 08/66] dt-bindings: media: Add Allwinner A31 MIPI CSI-2 bindings documentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Paul,

Thank you for the patch.

On Sat, Feb 05, 2022 at 07:53:31PM +0100, Paul Kocialkowski wrote:
> This introduces YAML bindings documentation for the Allwinner A31 MIPI
> CSI-2 controller.
> 
> Signed-off-by: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx>
> Reviewed-by: Maxime Ripard <mripard@xxxxxxxxxx>
> Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
> ---
>  .../media/allwinner,sun6i-a31-mipi-csi2.yaml  | 142 ++++++++++++++++++
>  1 file changed, 142 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
> new file mode 100644
> index 000000000000..09207904b6db
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
> @@ -0,0 +1,142 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/allwinner,sun6i-a31-mipi-csi2.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Allwinner A31 MIPI CSI-2 Device Tree Bindings
> +
> +maintainers:
> +  - Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx>
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - const: allwinner,sun6i-a31-mipi-csi2
> +      - items:
> +          - const: allwinner,sun8i-v3s-mipi-csi2
> +          - const: allwinner,sun6i-a31-mipi-csi2
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: Bus Clock
> +      - description: Module Clock
> +
> +  clock-names:
> +    items:
> +      - const: bus
> +      - const: mod
> +
> +  phys:
> +    maxItems: 1
> +    description: MIPI D-PHY
> +
> +  phy-names:
> +    items:
> +      - const: dphy
> +
> +  resets:
> +    maxItems: 1
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        description: Input port, connect to a MIPI CSI-2 sensor
> +
> +        properties:
> +          reg:
> +            const: 0
> +
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              data-lanes:
> +                minItems: 1
> +                maxItems: 4
> +
> +            required:
> +              - data-lanes
> +
> +        additionalProperties: false
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        description: Output port, connect to a CSI controller
> +
> +        properties:
> +          reg:
> +            const: 1
> +
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +        additionalProperties: false

The two ports should be required.

> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - phys
> +  - phy-names

And ports should be required here.

Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>

> +  - resets
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/sun8i-v3s-ccu.h>
> +    #include <dt-bindings/reset/sun8i-v3s-ccu.h>
> +
> +    mipi_csi2: csi@1cb1000 {
> +        compatible = "allwinner,sun8i-v3s-mipi-csi2",
> +                     "allwinner,sun6i-a31-mipi-csi2";
> +        reg = <0x01cb1000 0x1000>;
> +        interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
> +        clocks = <&ccu CLK_BUS_CSI>,
> +                 <&ccu CLK_CSI1_SCLK>;
> +        clock-names = "bus", "mod";
> +        resets = <&ccu RST_BUS_CSI>;
> +
> +        phys = <&dphy>;
> +        phy-names = "dphy";
> +
> +        ports {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            mipi_csi2_in: port@0 {
> +                reg = <0>;
> +
> +                mipi_csi2_in_ov5648: endpoint {
> +                    data-lanes = <1 2 3 4>;
> +
> +                    remote-endpoint = <&ov5648_out_mipi_csi2>;
> +                };
> +            };
> +
> +            mipi_csi2_out: port@1 {
> +                reg = <1>;
> +
> +                mipi_csi2_out_csi0: endpoint {
> +                    remote-endpoint = <&csi0_in_mipi_csi2>;
> +                };
> +            };
> +        };
> +    };
> +
> +...

-- 
Regards,

Laurent Pinchart




[Index of Archives]     [Linux Driver Development]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux