[PATCH] staging: pi433: remove unnecessary new line escape sequence characters

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



In this driver there were occurences of '\n'-ended strings when using
dev_dbg function which isn't required which most likely were leftovers
from a previous printk/pr_<level> implementation.

This patch removes the extraneous '\n' characters to make it consistent
with the other dev_dbg instances.

Signed-off-by: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@xxxxxxxxx>
---
Patch dependencies:

The following patches must be applied first given that changes are made
to the same set of files:

- https://lore.kernel.org/lkml/YfYdVokxsQ+Adl+T@xxxxxxxxxxxxxxx/
- https://lore.kernel.org/lkml/YfX+llwDWZZMz+NY@xxxxxxxxxxxxxxx/
---
 drivers/staging/pi433/pi433_if.c | 14 +++++++-------
 drivers/staging/pi433/rf69.c     | 16 ++++++++--------
 2 files changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/staging/pi433/pi433_if.c b/drivers/staging/pi433/pi433_if.c
index 02d4ccebf..db1b092e8 100644
--- a/drivers/staging/pi433/pi433_if.c
+++ b/drivers/staging/pi433/pi433_if.c
@@ -124,13 +124,13 @@ static irqreturn_t DIO0_irq_handler(int irq, void *dev_id)
 
 	if (device->irq_state[DIO0] == DIO_PACKET_SENT) {
 		device->free_in_fifo = FIFO_SIZE;
-		dev_dbg(device->dev, "DIO0 irq: Packet sent\n");
+		dev_dbg(device->dev, "DIO0 irq: Packet sent");
 		wake_up_interruptible(&device->fifo_wait_queue);
 	} else if (device->irq_state[DIO0] == DIO_RSSI_DIO0) {
-		dev_dbg(device->dev, "DIO0 irq: RSSI level over threshold\n");
+		dev_dbg(device->dev, "DIO0 irq: RSSI level over threshold");
 		wake_up_interruptible(&device->rx_wait_queue);
 	} else if (device->irq_state[DIO0] == DIO_PAYLOAD_READY) {
-		dev_dbg(device->dev, "DIO0 irq: Payload ready\n");
+		dev_dbg(device->dev, "DIO0 irq: Payload ready");
 		device->free_in_fifo = 0;
 		wake_up_interruptible(&device->fifo_wait_queue);
 	}
@@ -151,7 +151,7 @@ static irqreturn_t DIO1_irq_handler(int irq, void *dev_id)
 			device->free_in_fifo = FIFO_SIZE - FIFO_THRESHOLD - 1;
 	}
 	dev_dbg(device->dev,
-		"DIO1 irq: %d bytes free in fifo\n", device->free_in_fifo);
+		"DIO1 irq: %d bytes free in fifo", device->free_in_fifo);
 	wake_up_interruptible(&device->fifo_wait_queue);
 
 	return IRQ_HANDLED;
@@ -726,7 +726,7 @@ static int pi433_tx_thread(void *data)
 			retval = wait_event_interruptible(device->fifo_wait_queue,
 							  device->free_in_fifo > 0);
 			if (retval) {
-				dev_dbg(device->dev, "ABORT\n");
+				dev_dbg(device->dev, "ABORT");
 				goto abort;
 			}
 		}
@@ -1180,7 +1180,7 @@ static int pi433_probe(struct spi_device *spi)
 
 	retval = spi_setup(spi);
 	if (retval) {
-		dev_dbg(&spi->dev, "configuration of SPI interface failed!\n");
+		dev_dbg(&spi->dev, "configuration of SPI interface failed!");
 		return retval;
 	}
 
@@ -1283,7 +1283,7 @@ static int pi433_probe(struct spi_device *spi)
 		goto device_create_failed;
 	} else {
 		dev_dbg(device->dev,
-			"created device for major %d, minor %d\n",
+			"created device for major %d, minor %d",
 			MAJOR(pi433_dev),
 			device->minor);
 	}
diff --git a/drivers/staging/pi433/rf69.c b/drivers/staging/pi433/rf69.c
index 2ab3bf46e..9a8f93fd7 100644
--- a/drivers/staging/pi433/rf69.c
+++ b/drivers/staging/pi433/rf69.c
@@ -37,9 +37,9 @@ u8 rf69_read_reg(struct spi_device *spi, u8 addr)
 		 * that module is connected. Therefore no error
 		 * handling, just an optional error message...
 		 */
-		dev_dbg(&spi->dev, "read 0x%x FAILED\n", addr);
+		dev_dbg(&spi->dev, "read 0x%x FAILED", addr);
 	else
-		dev_dbg(&spi->dev, "read 0x%x from reg 0x%x\n", retval, addr);
+		dev_dbg(&spi->dev, "read 0x%x from reg 0x%x", retval, addr);
 #endif
 
 	return retval;
@@ -62,9 +62,9 @@ static int rf69_write_reg(struct spi_device *spi, u8 addr, u8 value)
 		 * that module is connected. Therefore no error
 		 * handling, just an optional error message...
 		 */
-		dev_dbg(&spi->dev, "write 0x%x to 0x%x FAILED\n", value, addr);
+		dev_dbg(&spi->dev, "write 0x%x to 0x%x FAILED", value, addr);
 	else
-		dev_dbg(&spi->dev, "wrote 0x%x to reg 0x%x\n", value, addr);
+		dev_dbg(&spi->dev, "wrote 0x%x to reg 0x%x", value, addr);
 #endif
 
 	return retval;
@@ -870,7 +870,7 @@ int rf69_read_fifo(struct spi_device *spi, u8 *buffer, unsigned int size)
 
 	if (size > FIFO_SIZE) {
 		dev_dbg(&spi->dev,
-			"read fifo: passed in buffer bigger then internal buffer\n");
+			"read fifo: passed in buffer bigger then internal buffer");
 		return -EMSGSIZE;
 	}
 
@@ -885,7 +885,7 @@ int rf69_read_fifo(struct spi_device *spi, u8 *buffer, unsigned int size)
 
 #ifdef DEBUG_FIFO_ACCESS
 	for (i = 0; i < size; i++)
-		dev_dbg(&spi->dev, "%d - 0x%x\n", i, local_buffer[i + 1]);
+		dev_dbg(&spi->dev, "%d - 0x%x", i, local_buffer[i + 1]);
 #endif
 
 	memcpy(buffer, &local_buffer[1], size);
@@ -902,7 +902,7 @@ int rf69_write_fifo(struct spi_device *spi, u8 *buffer, unsigned int size)
 
 	if (size > FIFO_SIZE) {
 		dev_dbg(&spi->dev,
-			"read fifo: passed in buffer bigger then internal buffer\n");
+			"read fifo: passed in buffer bigger then internal buffer");
 		return -EMSGSIZE;
 	}
 
@@ -911,7 +911,7 @@ int rf69_write_fifo(struct spi_device *spi, u8 *buffer, unsigned int size)
 
 #ifdef DEBUG_FIFO_ACCESS
 	for (i = 0; i < size; i++)
-		dev_dbg(&spi->dev, "0x%x\n", buffer[i]);
+		dev_dbg(&spi->dev, "0x%x", buffer[i]);
 #endif
 
 	return spi_write(spi, local_buffer, size + 1);
-- 
2.34.1





[Index of Archives]     [Linux Driver Development]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux