Max bit rate is dependent on which modulation is used. Previous
validation routine only took into consideration min bit rate which can
lead a misconfiguration of the rf69 chip causing the packets not to be
sent/read.
This patch enhances that input check in set_bit_rate to account for
modulation values and their respective max bit rate
Signed-off-by: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@xxxxxxxxx>
---
drivers/staging/pi433/TODO | 2 ++
drivers/staging/pi433/rf69.c | 10 +++++++++-
2 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/staging/pi433/TODO b/drivers/staging/pi433/TODO
index 63a40bfcc67e..b9e6c01a02e0 100644
--- a/drivers/staging/pi433/TODO
+++ b/drivers/staging/pi433/TODO
@@ -3,3 +3,5 @@
* currently the code introduces new IOCTLs. I'm afraid this is a bad idea.
-> Replace this with another interface, hints are welcome!
* Some missing data (marked with ###) needs to be added in the documentation
+* Change (struct pi433_tx_cfg)->bit_rate to be a u32 so that we can support
+ bit rates up to 300kbps per the spec.
diff --git a/drivers/staging/pi433/rf69.c b/drivers/staging/pi433/rf69.c
index f4ac17adcd83..d60514a840c2 100644
--- a/drivers/staging/pi433/rf69.c
+++ b/drivers/staging/pi433/rf69.c
@@ -229,9 +229,17 @@ int rf69_set_bit_rate(struct spi_device *spi, u16 bit_rate)
u32 bit_rate_reg;
u8 msb;
u8 lsb;
+ enum modulation mod;
+
+ // check if modulation is configured
+ mod = rf69_get_modulation(spi);
+ if (mod == UNDEF) {
+ dev_dbg(&spi->dev, "setBitRate: modulation is undefined");
+ return -EINVAL;
+ }
// check input value
- if (bit_rate < 1200) {
+ if (bit_rate < 1200 || (mod == OOK && bit_rate > 32768)) {
dev_dbg(&spi->dev, "setBitRate: illegal input param");
return -EINVAL;
}
--
2.25.4
