The TrekStor SurfTab duo W1 10.1 has a hw bug where turning eldo2 back on
after having turned it off causes the CPLM3218 ambient-light-sensor on
the front camera sensor's I2C bus to crash, hanging the bus.
Add a DMI quirk table for systems on which to leave eldo2 on.
Note an alternative fix is to turn off the CPLM3218 ambient-light-sensor
as long as the camera sensor is being used, this is what Windows seems
to do as a workaround (based on analyzing the DSDT). But that is not
easy to do cleanly under Linux.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
.../media/atomisp/pci/atomisp_gmin_platform.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c
index 544e3e7b3aaf..7e47db82de07 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c
@@ -761,6 +761,21 @@ static int axp_regulator_set(struct device *dev, struct gmin_subdev *gs,
return 0;
}
+/*
+ * Some boards contain a hw-bug where turning eldo2 back on after having turned
+ * it off causes the CPLM3218 ambient-light-sensor on the image-sensor's I2C bus
+ * to crash, hanging the bus. Do not turn eldo2 off on these systems.
+ */
+static const struct dmi_system_id axp_leave_eldo2_on_ids[] = {
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TrekStor"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "SurfTab duo W1 10.1 (VT4)"),
+ },
+ },
+ { }
+};
+
static int axp_v1p8_on(struct device *dev, struct gmin_subdev *gs)
{
int ret;
@@ -790,6 +805,9 @@ static int axp_v1p8_off(struct device *dev, struct gmin_subdev *gs)
if (ret)
return ret;
+ if (dmi_check_system(axp_leave_eldo2_on_ids))
+ return 0;
+
ret = axp_regulator_set(dev, gs, gs->eldo2_sel_reg, gs->eldo2_1p8v,
ELDO_CTRL_REG, gs->eldo2_ctrl_shift, false);
return ret;
--
2.33.1
