Remove unused fields from struct hal_data_8188e.
Signed-off-by: Michael Straube <straube.linux@xxxxxxxxx>
---
v2: no changes
.../staging/r8188eu/include/rtl8188e_hal.h | 30 -------------------
1 file changed, 30 deletions(-)
diff --git a/drivers/staging/r8188eu/include/rtl8188e_hal.h b/drivers/staging/r8188eu/include/rtl8188e_hal.h
index 40b3db34b8f2..2ce42d647a34 100644
--- a/drivers/staging/r8188eu/include/rtl8188e_hal.h
+++ b/drivers/staging/r8188eu/include/rtl8188e_hal.h
@@ -175,15 +175,9 @@ struct hal_data_8188e {
u16 BasicRateSet;
- /* EEPROM setting. */
- u16 EEPROMSVID;
- u16 EEPROMSDID;
u8 EEPROMRegulatory;
-
u8 EEPROMThermalMeter;
- bool EepromOrEfuse;
-
u8 Index24G_CCK_Base[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
u8 Index24G_BW40_Base[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
/* If only one tx, only BW20 and OFDM are used. */
@@ -192,11 +186,6 @@ struct hal_data_8188e {
s8 BW20_24G_Diff[RF_PATH_MAX][MAX_TX_COUNT];
s8 BW40_24G_Diff[RF_PATH_MAX][MAX_TX_COUNT];
- u8 TxPwrLevelCck[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
- /* For HT 40MHZ pwr */
- u8 TxPwrLevelHT40_1S[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
- /* For HT 40MHZ pwr */
- u8 TxPwrLevelHT40_2S[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
/* HT 20<->40 Pwr diff */
u8 TxPwrHt20Diff[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
/* For HT<->legacy pwr diff */
@@ -205,7 +194,6 @@ struct hal_data_8188e {
u8 PwrGroupHT20[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
u8 PwrGroupHT40[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
- u8 LegacyHTTxPowerDiff;/* Legacy to HT rate power diff */
/* The current Tx Power Level */
u8 CurrentCckTxPwrIdx;
u8 CurrentOfdm24GTxPwrIdx;
@@ -213,21 +201,12 @@ struct hal_data_8188e {
u8 CurrentBW4024GTxPwrIdx;
/* Read/write are allow for following hardware information variables */
- u8 framesync;
- u32 framesyncC34;
- u8 framesyncMonitor;
- u8 DefaultInitialGain[4];
u8 pwrGroupCnt;
u32 MCSTxPowerLevelOriginalOffset[MAX_PG_GROUP][16];
- u32 CCKTxPowerLevelOriginalOffset;
u8 CrystalCap;
- u32 AntennaTxPath; /* Antenna path Tx */
- u32 AntennaRxPath; /* Antenna path Rx */
u8 ExternalPA;
- u8 b1x1RecvCombine; /* for 1T1R receive combining */
-
u32 AcParam_BE; /* Original parameter for BE, use for EDCA turbo. */
struct bb_reg_def PHYRegDef[2]; /* Radio A/B */
@@ -254,17 +233,9 @@ struct hal_data_8188e {
u8 FwRsvdPageStartOffset; /* Reserve page start offset except
* beacon in TxQ. */
- /* 2010/08/09 MH Add CU power down mode. */
- bool pwrdown;
-
u8 OutEpQueueSel;
u8 OutEpNumber;
- /* 2010/11/22 MH Add for slim combo debug mode selective. */
- /* This is used for fix the drawback of CU TSMC-A/UMC-A cut.
- * HW auto suspend ability. Close BT clock. */
- bool SlimComboDbg;
-
u16 EfuseUsedBytes;
struct P2P_PS_Offload_t p2p_ps_offload;
@@ -280,7 +251,6 @@ struct hal_data_8188e {
u8 C2hArray[16];
u8 UsbTxAggMode;
u8 UsbTxAggDescNum;
- u32 MaxUsbRxAggBlock;
enum usb_rx_agg_mode UsbRxAggMode;
u8 UsbRxAggBlockCount; /* USB Block count. Block size is
--
2.34.1
