Remove the power cut mask from the steps of the power transitions.
The power cut mask is not used, all values are allowed for all steps.
Signed-off-by: Martin Kaiser <martin@xxxxxxxxx>
---
drivers/staging/r8188eu/hal/HalPwrSeqCmd.c | 5 +-
drivers/staging/r8188eu/hal/usb_halinit.c | 6 +-
.../staging/r8188eu/include/Hal8188EPwrSeq.h | 72 +++++++++----------
.../staging/r8188eu/include/HalPwrSeqCmd.h | 17 +----
4 files changed, 42 insertions(+), 58 deletions(-)
diff --git a/drivers/staging/r8188eu/hal/HalPwrSeqCmd.c b/drivers/staging/r8188eu/hal/HalPwrSeqCmd.c
index 0fd11aca7ac7..f64b5352f043 100644
--- a/drivers/staging/r8188eu/hal/HalPwrSeqCmd.c
+++ b/drivers/staging/r8188eu/hal/HalPwrSeqCmd.c
@@ -25,7 +25,7 @@ Major Change History:
* Assumption:
* We should follow specific format which was released from HW SD.
*/
-u8 HalPwrSeqCmdParsing(struct adapter *padapter, u8 cut_vers, u8 fab_vers,
+u8 HalPwrSeqCmdParsing(struct adapter *padapter, u8 fab_vers,
u8 ifacetype, struct wl_pwr_cfg pwrseqcmd[])
{
struct wl_pwr_cfg pwrcfgcmd = {0};
@@ -39,9 +39,8 @@ u8 HalPwrSeqCmdParsing(struct adapter *padapter, u8 cut_vers, u8 fab_vers,
do {
pwrcfgcmd = pwrseqcmd[aryidx];
- /* 2 Only Handle the command whose FAB, CUT, and Interface are matched */
+ /* 2 Only Handle the command whose FAB and Interface are matched */
if ((GET_PWR_CFG_FAB_MASK(pwrcfgcmd) & fab_vers) &&
- (GET_PWR_CFG_CUT_MASK(pwrcfgcmd) & cut_vers) &&
(GET_PWR_CFG_INTF_MASK(pwrcfgcmd) & ifacetype)) {
switch (GET_PWR_CFG_CMD(pwrcfgcmd)) {
case PWR_CMD_WRITE:
diff --git a/drivers/staging/r8188eu/hal/usb_halinit.c b/drivers/staging/r8188eu/hal/usb_halinit.c
index 40227078c4b6..528a53d3e61e 100644
--- a/drivers/staging/r8188eu/hal/usb_halinit.c
+++ b/drivers/staging/r8188eu/hal/usb_halinit.c
@@ -78,7 +78,7 @@ u32 rtl8188eu_InitPowerOn(struct adapter *adapt)
if (haldata->bMacPwrCtrlOn)
return _SUCCESS;
- if (!HalPwrSeqCmdParsing(adapt, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, Rtl8188E_NIC_PWR_ON_FLOW)) {
+ if (!HalPwrSeqCmdParsing(adapt, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, Rtl8188E_NIC_PWR_ON_FLOW)) {
DBG_88E(KERN_ERR "%s: run power on flow fail\n", __func__);
return _FAIL;
}
@@ -824,7 +824,7 @@ static void CardDisableRTL8188EU(struct adapter *Adapter)
rtw_write8(Adapter, REG_CR, 0x0);
/* Run LPS WL RFOFF flow */
- HalPwrSeqCmdParsing(Adapter, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, Rtl8188E_NIC_LPS_ENTER_FLOW);
+ HalPwrSeqCmdParsing(Adapter, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, Rtl8188E_NIC_LPS_ENTER_FLOW);
/* 2. 0x1F[7:0] = 0 turn off RF */
@@ -845,7 +845,7 @@ static void CardDisableRTL8188EU(struct adapter *Adapter)
rtw_write8(Adapter, REG_32K_CTRL, val8 & (~BIT(0)));
/* Card disable power action flow */
- HalPwrSeqCmdParsing(Adapter, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, Rtl8188E_NIC_DISABLE_FLOW);
+ HalPwrSeqCmdParsing(Adapter, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, Rtl8188E_NIC_DISABLE_FLOW);
/* Reset MCU IO Wrapper */
val8 = rtw_read8(Adapter, REG_RSV_CTRL + 1);
diff --git a/drivers/staging/r8188eu/include/Hal8188EPwrSeq.h b/drivers/staging/r8188eu/include/Hal8188EPwrSeq.h
index d36a2ab2ec7b..c1da4a4bf9c9 100644
--- a/drivers/staging/r8188eu/include/Hal8188EPwrSeq.h
+++ b/drivers/staging/r8188eu/include/Hal8188EPwrSeq.h
@@ -8,55 +8,55 @@
#define RTL8188E_TRANS_CARDEMU_TO_ACT \
/* format */ \
- /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
- {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), BIT(1)},/* wait till 0x04[17] = 1 power ready*/ \
- {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0)|BIT(1), 0}, /* 0x02[1:0] = 0 reset BB*/ \
- {0x0026, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)}, /*0x24[23] = 2b'01 schmit trigger */ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0}, /* 0x04[15] = 0 disable HWPDN (control by DRV)*/\
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4)|BIT(3), 0}, /*0x04[12:11] = 2b'00 disable WL suspend*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), BIT(0)}, /*0x04[8] = 1 polling until return 0*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(0), 0}, /*wait till 0x04[8] = 0*/ \
- {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, /*LDO normal mode*/ \
- {0x0074, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, /*SDIO Driving*/ \
+ /* { offset, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
+ {0x0006, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), BIT(1)},/* wait till 0x04[17] = 1 power ready*/ \
+ {0x0002, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0)|BIT(1), 0}, /* 0x02[1:0] = 0 reset BB*/ \
+ {0x0026, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)}, /*0x24[23] = 2b'01 schmit trigger */ \
+ {0x0005, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0}, /* 0x04[15] = 0 disable HWPDN (control by DRV)*/\
+ {0x0005, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4)|BIT(3), 0}, /*0x04[12:11] = 2b'00 disable WL suspend*/ \
+ {0x0005, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), BIT(0)}, /*0x04[8] = 1 polling until return 0*/ \
+ {0x0005, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(0), 0}, /*wait till 0x04[8] = 0*/ \
+ {0x0023, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, /*LDO normal mode*/ \
+ {0x0074, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, /*SDIO Driving*/ \
#define RTL8188E_TRANS_ACT_TO_CARDEMU \
/* format */ \
- /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
- {0x001F, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0},/*0x1F[7:0] = 0 turn off RF*/ \
- {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, /*LDO Sleep mode*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)}, /*0x04[9] = 1 turn off MAC by HW state machine*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), 0}, /*wait till 0x04[9] = 0 polling until return 0 to disable*/ \
+ /* { offset, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
+ {0x001F, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0},/*0x1F[7:0] = 0 turn off RF*/ \
+ {0x0023, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, /*LDO Sleep mode*/ \
+ {0x0005, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)}, /*0x04[9] = 1 turn off MAC by HW state machine*/ \
+ {0x0005, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), 0}, /*wait till 0x04[9] = 0 polling until return 0 to disable*/ \
#define RTL8188E_TRANS_CARDEMU_TO_CARDDIS \
/* format */ \
- /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
- {0x0026, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)}, /*0x24[23] = 2b'01 schmit trigger */ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3)}, /*0x04[12:11] = 2b'01 enable WL suspend*/ \
- {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, /* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */ \
- {0x0041, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, /*Clear SIC_EN register 0x40[12] = 1'b0 */ \
- {0xfe10, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, /*Set USB suspend enable local register 0xfe10[4]=1 */ \
- {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), BIT(0)}, /*Set SDIO suspend local register*/ \
- {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), 0}, /*wait power state to suspend*/
+ /* { offset, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
+ {0x0026, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)}, /*0x24[23] = 2b'01 schmit trigger */ \
+ {0x0005, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3)}, /*0x04[12:11] = 2b'01 enable WL suspend*/ \
+ {0x0007, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, /* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */ \
+ {0x0041, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, /*Clear SIC_EN register 0x40[12] = 1'b0 */ \
+ {0xfe10, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, /*Set USB suspend enable local register 0xfe10[4]=1 */ \
+ {0x0086, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), BIT(0)}, /*Set SDIO suspend local register*/ \
+ {0x0086, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), 0}, /*wait power state to suspend*/
/* This is used by driver for LPSRadioOff Procedure, not for FW LPS Step */
#define RTL8188E_TRANS_ACT_TO_LPS \
/* format */ \
- /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here */ \
- {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x7F},/*Tx Pause*/ \
- {0x05F8, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},/*Should be zero if no packet is transmitting*/ \
- {0x05F9, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},/*Should be zero if no packet is transmitting*/ \
- {0x05FA, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},/*Should be zero if no packet is transmitting*/ \
- {0x05FB, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},/*Should be zero if no packet is transmitting*/ \
- {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0},/*CCK and OFDM are disabled,and clock are gated*/ \
- {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_US},/*Delay 1us*/ \
- {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x3F},/*Reset MAC TRX*/ \
- {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), 0},/*check if removed later*/ \
- {0x0553, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(5), BIT(5)},/*Respond TxOK to scheduler*/ \
+ /* { offset, fab_msk|interface_msk, base|cmd, msk, value }, comments here */ \
+ {0x0522, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x7F},/*Tx Pause*/ \
+ {0x05F8, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},/*Should be zero if no packet is transmitting*/ \
+ {0x05F9, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},/*Should be zero if no packet is transmitting*/ \
+ {0x05FA, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},/*Should be zero if no packet is transmitting*/ \
+ {0x05FB, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},/*Should be zero if no packet is transmitting*/ \
+ {0x0002, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0},/*CCK and OFDM are disabled,and clock are gated*/ \
+ {0x0002, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_US},/*Delay 1us*/ \
+ {0x0100, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x3F},/*Reset MAC TRX*/ \
+ {0x0101, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), 0},/*check if removed later*/ \
+ {0x0553, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(5), BIT(5)},/*Respond TxOK to scheduler*/ \
#define RTL8188E_TRANS_END \
/* format */ \
- /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
- {0xFFFF, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,0, PWR_CMD_END, 0, 0}, /* */
+ /* { offset, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/ \
+ {0xFFFF, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,0, PWR_CMD_END, 0, 0}, /* */
extern struct wl_pwr_cfg rtl8188E_power_on_flow[];
extern struct wl_pwr_cfg rtl8188E_card_disable_flow[];
diff --git a/drivers/staging/r8188eu/include/HalPwrSeqCmd.h b/drivers/staging/r8188eu/include/HalPwrSeqCmd.h
index fe7ac910beb8..f82860bd0e83 100644
--- a/drivers/staging/r8188eu/include/HalPwrSeqCmd.h
+++ b/drivers/staging/r8188eu/include/HalPwrSeqCmd.h
@@ -65,19 +65,6 @@
#define PWR_FAB_UMC_MSK BIT(1)
#define PWR_FAB_ALL_MSK (BIT(0)|BIT(1)|BIT(2)|BIT(3))
-/*---------------------------------------------*/
-/* 3 The value of cut_msk: 8 bits */
-/*---------------------------------------------*/
-#define PWR_CUT_TESTCHIP_MSK BIT(0)
-#define PWR_CUT_A_MSK BIT(1)
-#define PWR_CUT_B_MSK BIT(2)
-#define PWR_CUT_C_MSK BIT(3)
-#define PWR_CUT_D_MSK BIT(4)
-#define PWR_CUT_E_MSK BIT(5)
-#define PWR_CUT_F_MSK BIT(6)
-#define PWR_CUT_G_MSK BIT(7)
-#define PWR_CUT_ALL_MSK 0xFF
-
enum pwrseq_cmd_delat_unit {
PWRSEQ_DELAY_US,
PWRSEQ_DELAY_MS,
@@ -85,7 +72,6 @@ enum pwrseq_cmd_delat_unit {
struct wl_pwr_cfg {
u16 offset;
- u8 cut_msk;
u8 fab_msk:4;
u8 interface_msk:4;
u8 base:4;
@@ -95,7 +81,6 @@ struct wl_pwr_cfg {
};
#define GET_PWR_CFG_OFFSET(__PWR_CMD) __PWR_CMD.offset
-#define GET_PWR_CFG_CUT_MASK(__PWR_CMD) __PWR_CMD.cut_msk
#define GET_PWR_CFG_FAB_MASK(__PWR_CMD) __PWR_CMD.fab_msk
#define GET_PWR_CFG_INTF_MASK(__PWR_CMD) __PWR_CMD.interface_msk
#define GET_PWR_CFG_BASE(__PWR_CMD) __PWR_CMD.base
@@ -104,7 +89,7 @@ struct wl_pwr_cfg {
#define GET_PWR_CFG_VALUE(__PWR_CMD) __PWR_CMD.value
/* Prototype of protected function. */
-u8 HalPwrSeqCmdParsing(struct adapter *padapter, u8 CutVersion, u8 FabVersion,
+u8 HalPwrSeqCmdParsing(struct adapter *padapter, u8 FabVersion,
u8 InterfaceType, struct wl_pwr_cfg PwrCfgCmd[]);
#endif
--
2.20.1
