From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
This adds the necessary bits to drive the VPU blk-ctrl on the i.MX8MQ, to
avoid putting more of this functionality into the decoder driver.
Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
diff --git a/drivers/soc/imx/imx8m-blk-ctrl.c b/drivers/soc/imx/imx8m-blk-ctrl.c
index 519b3651d1d9..a7c12e8fa89b 100644
--- a/drivers/soc/imx/imx8m-blk-ctrl.c
+++ b/drivers/soc/imx/imx8m-blk-ctrl.c
@@ -14,6 +14,7 @@
#include <linux/clk.h>
#include <dt-bindings/power/imx8mm-power.h>
+#include <dt-bindings/power/imx8mq-power.h>
#define BLK_SFT_RSTN 0x0
#define BLK_CLK_EN 0x4
@@ -498,6 +499,68 @@ static const struct imx8m_blk_ctrl_data imx8mm_disp_blk_ctl_dev_data = {
.num_domains = ARRAY_SIZE(imx8mm_disp_blk_ctl_domain_data),
};
+static int imx8mq_vpu_power_notifier(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct imx8m_blk_ctrl *bc = container_of(nb, struct imx8m_blk_ctrl,
+ power_nb);
+
+ if (action != GENPD_NOTIFY_ON && action != GENPD_NOTIFY_PRE_OFF)
+ return NOTIFY_OK;
+
+ /*
+ * The ADB in the VPUMIX domain has no separate reset and clock
+ * enable bits, but is ungated and reset together with the VPUs. The
+ * reset and clock enable inputs to the ADB is a logical OR of the
+ * VPU bits. In order to set the G2 fuse bits, the G2 clock must
+ * also be enabled.
+ */
+ regmap_set_bits(bc->regmap, BLK_SFT_RSTN, BIT(0) | BIT(1));
+ regmap_set_bits(bc->regmap, BLK_CLK_EN, BIT(0) | BIT(1));
+
+ if (action == GENPD_NOTIFY_ON) {
+ /*
+ * On power up we have no software backchannel to the GPC to
+ * wait for the ADB handshake to happen, so we just delay for a
+ * bit. On power down the GPC driver waits for the handshake.
+ */
+ udelay(5);
+
+ /* set "fuse" bits to enable the VPUs */
+ regmap_set_bits(bc->regmap, 0x8, 0xffffffff);
+ regmap_set_bits(bc->regmap, 0xc, 0xffffffff);
+ regmap_set_bits(bc->regmap, 0x10, 0xffffffff);
+ }
+
+ return NOTIFY_OK;
+}
+
+static const struct imx8m_blk_ctrl_domain_data imx8mq_vpu_blk_ctl_domain_data[] = {
+ [IMX8MQ_VPUBLK_PD_G1] = {
+ .name = "vpublk-g1",
+ .clk_names = (const char *[]){ "g1", },
+ .num_clks = 1,
+ .gpc_name = "g1",
+ .rst_mask = BIT(1),
+ .clk_mask = BIT(1),
+ },
+ [IMX8MQ_VPUBLK_PD_G2] = {
+ .name = "vpublk-g2",
+ .clk_names = (const char *[]){ "g2", },
+ .num_clks = 1,
+ .gpc_name = "g2",
+ .rst_mask = BIT(0),
+ .clk_mask = BIT(0),
+ },
+};
+
+static const struct imx8m_blk_ctrl_data imx8mq_vpu_blk_ctl_dev_data = {
+ .max_reg = 0x14,
+ .power_notifier_fn = imx8mq_vpu_power_notifier,
+ .domains = imx8mq_vpu_blk_ctl_domain_data,
+ .num_domains = ARRAY_SIZE(imx8mq_vpu_blk_ctl_domain_data),
+};
+
static const struct of_device_id imx8m_blk_ctrl_of_match[] = {
{
.compatible = "fsl,imx8mm-vpu-blk-ctrl",
@@ -505,7 +568,10 @@ static const struct of_device_id imx8m_blk_ctrl_of_match[] = {
}, {
.compatible = "fsl,imx8mm-disp-blk-ctrl",
.data = &imx8mm_disp_blk_ctl_dev_data
- } ,{
+ }, {
+ .compatible = "fsl,imx8mq-vpu-blk-ctrl",
+ .data = &imx8mq_vpu_blk_ctl_dev_data
+ }, {
/* Sentinel */
}
};
--
2.32.0
