Re: [PATCH 2/2] dt-bindings: soc: bcm: Convert brcm, bcm2835-vchiq to json-schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rob,

Am 17.10.21 um 17:29 schrieb Rob Herring:
> On Sun, 17 Oct 2021 15:06:36 +0200, Stefan Wahren wrote:
>> This converts the VCHIQ bindings to YAML format.
>>
>> Signed-off-by: Stefan Wahren <stefan.wahren@xxxxxxxx>
>> ---
>>  .../bindings/soc/bcm/brcm,bcm2835-vchiq.txt        | 17 --------
>>  .../bindings/soc/bcm/brcm,bcm2835-vchiq.yaml       | 47 ++++++++++++++++++++++
>>  2 files changed, 47 insertions(+), 17 deletions(-)
>>  delete mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt
>>  create mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.yaml
>>
> Running 'make dtbs_check' with the schema in this patch gives the
> following warnings. Consider if they are expected or the schema is
> incorrect. These may not be new warnings.
>
> Note that it is not yet a requirement to have 0 warnings for dtbs_check.
> This will change in the future.
>
> Full log is available here: https://patchwork.ozlabs.org/patch/1542230
>
>
> mailbox@7e00b840: compatible: Additional items are not allowed ('brcm,bcm2835-vchiq' was unexpected)
> 	arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-a-plus.dt.yaml
> 	arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dt.yaml
> 	arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dt.yaml
> 	arch/arm64/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dt.yaml
> 	arch/arm/boot/dts/bcm2836-rpi-2-b.dt.yaml
> 	arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dt.yaml
> 	arch/arm/boot/dts/bcm2837-rpi-3-b.dt.yaml
> 	arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dt.yaml
> 	arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dt.yaml
>
> mailbox@7e00b840: compatible: ['brcm,bcm2836-vchiq', 'brcm,bcm2835-vchiq'] is too long
> 	arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-a-plus.dt.yaml
> 	arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dt.yaml
> 	arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dt.yaml
> 	arch/arm64/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dt.yaml
> 	arch/arm/boot/dts/bcm2836-rpi-2-b.dt.yaml
> 	arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dt.yaml
> 	arch/arm/boot/dts/bcm2837-rpi-3-b.dt.yaml
> 	arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dt.yaml
> 	arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dt.yaml

i'm confused patch 1/2 ( "ARM: dts: bcm283x: Drop fallback compatible
for vchiq" ) of this series should prevent this warning. Was it applied
before running dtbs_check?

Best regards

>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel




[Index of Archives]     [Linux Driver Development]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux