Remove some unused constants and variables that are left over from
previous cleanup patches.
Suggested-by: Martin Kaiser <martin@xxxxxxxxx>
Signed-off-by: Michael Straube <straube.linux@xxxxxxxxx>
---
drivers/staging/r8188eu/hal/odm.c | 8 --------
drivers/staging/r8188eu/hal/odm_HWConfig.c | 3 ---
drivers/staging/r8188eu/include/odm.h | 17 -----------------
3 files changed, 28 deletions(-)
diff --git a/drivers/staging/r8188eu/hal/odm.c b/drivers/staging/r8188eu/hal/odm.c
index 0987ff3e382a..fc425d359b15 100644
--- a/drivers/staging/r8188eu/hal/odm.c
+++ b/drivers/staging/r8188eu/hal/odm.c
@@ -979,14 +979,6 @@ void ODM_TXPowerTrackingCheck(struct odm_dm_struct *pDM_Odm)
}
}
-/* antenna mapping info */
-/* 1: right-side antenna */
-/* 2/0: left-side antenna */
-/* PDM_SWAT_Table->CCK_Ant1_Cnt /OFDM_Ant1_Cnt: for right-side antenna: Ant:1 RxDefaultAnt1 */
-/* PDM_SWAT_Table->CCK_Ant2_Cnt /OFDM_Ant2_Cnt: for left-side antenna: Ant:0 RxDefaultAnt2 */
-/* We select left antenna as default antenna in initial process, modify it as needed */
-/* */
-
void odm_InitHybridAntDiv(struct odm_dm_struct *pDM_Odm)
{
if (!(pDM_Odm->SupportAbility & ODM_BB_ANT_DIV))
diff --git a/drivers/staging/r8188eu/hal/odm_HWConfig.c b/drivers/staging/r8188eu/hal/odm_HWConfig.c
index 3d639b2720b2..af28af6f66d7 100644
--- a/drivers/staging/r8188eu/hal/odm_HWConfig.c
+++ b/drivers/staging/r8188eu/hal/odm_HWConfig.c
@@ -58,7 +58,6 @@ static void odm_RxPhyStatus92CSeries_Parsing(struct odm_dm_struct *dm_odm,
struct odm_per_pkt_info *pPktinfo,
struct adapter *adapt)
{
- struct sw_ant_switch *pDM_SWAT_Table = &dm_odm->DM_SWAT_Table;
u8 i, Max_spatial_stream;
s8 rx_pwr[4], rx_pwr_all = 0;
u8 EVM, PWDB_ALL = 0, PWDB_ALL_BT;
@@ -224,8 +223,6 @@ static void odm_RxPhyStatus92CSeries_Parsing(struct odm_dm_struct *dm_odm,
pPhyInfo->SignalStrength = (u8)(odm_SignalScaleMapping(dm_odm, total_rssi /= rf_rx_num));
}
- /* For 92C/92D HW (Hybrid) Antenna Diversity */
- pDM_SWAT_Table->antsel = pPhyStaRpt->ant_sel;
/* For 88E HW Antenna Diversity */
dm_odm->DM_FatTable.antsel_rx_keep_0 = pPhyStaRpt->ant_sel;
dm_odm->DM_FatTable.antsel_rx_keep_1 = pPhyStaRpt->ant_sel_b;
diff --git a/drivers/staging/r8188eu/include/odm.h b/drivers/staging/r8188eu/include/odm.h
index 841603b341bd..f1ea9fa89a26 100644
--- a/drivers/staging/r8188eu/include/odm.h
+++ b/drivers/staging/r8188eu/include/odm.h
@@ -111,12 +111,6 @@ struct rx_hpc {
#define ODM_ASSOCIATE_ENTRY_NUM 32 /* Max size of AsocEntry[]. */
-/* This indicates two different steps. */
-/* Using SWAW_STEP_PEAK, driver needs to switch antenna and listen to
- * the signal on the air. */
-
-#define SWAW_STEP_PEAK 0
-
struct sw_ant_switch {
u8 try_flag;
s32 PreRSSI;
@@ -131,8 +125,6 @@ struct sw_ant_switch {
/* Before link Antenna Switch check */
u8 SWAS_NoLink_State;
u32 SWAS_NoLink_BK_Reg860;
- bool ANTA_ON; /* To indicate Ant A is or not */
- bool ANTB_ON; /* To indicate Ant B is on or not */
s32 RSSI_sum_A;
s32 RSSI_sum_B;
@@ -146,16 +138,8 @@ struct sw_ant_switch {
u64 RXByteCnt_B;
u8 TrafficLoad;
struct timer_list SwAntennaSwitchTimer;
- /* Hybrid Antenna Diversity */
- u32 CCK_Ant1_Cnt[ODM_ASSOCIATE_ENTRY_NUM];
- u32 CCK_Ant2_Cnt[ODM_ASSOCIATE_ENTRY_NUM];
- u32 OFDM_Ant1_Cnt[ODM_ASSOCIATE_ENTRY_NUM];
- u32 OFDM_Ant2_Cnt[ODM_ASSOCIATE_ENTRY_NUM];
- u32 RSSI_Ant1_Sum[ODM_ASSOCIATE_ENTRY_NUM];
- u32 RSSI_Ant2_Sum[ODM_ASSOCIATE_ENTRY_NUM];
u8 TxAnt[ODM_ASSOCIATE_ENTRY_NUM];
u8 TargetSTA;
- u8 antsel;
u8 RxIdleAnt;
};
@@ -574,7 +558,6 @@ enum ant_div_type {
CGCS_RX_HW_ANTDIV = 0x02,
FIXED_HW_ANTDIV = 0x03,
CG_TRX_SMART_ANTDIV = 0x04,
- CGCS_RX_SW_ANTDIV = 0x05,
};
/* Copy from SD4 defined structure. We use to support PHY DM integration. */
--
2.33.0
