Re: [PATCH v7 11/11] media: hantro: Support NV12 on the G2 core

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jernej,

W dniu 14.10.2021 o 19:42, Jernej Škrabec pisze:
Hi Andrzej!

Dne sreda, 29. september 2021 ob 18:04:39 CEST je Andrzej Pietrasiewicz
napisal(a):
The G2 decoder block produces NV12 4x4 tiled format (NV12_4L4).
Enable the G2 post-processor block, in order to produce regular NV12.

The logic in hantro_postproc.c is leveraged to take care of allocating
the extra buffers and configure the post-processor, which is
significantly simpler than the one on the G1.

Quick summary of discussion on LibreELEC Slack:
When using NV12 format on Allwinner H6 variant of G2 (needs some driver
changes), I get frames out of order. If I use native NV12 tiled format, frames
are ordered correctly.

Currently I'm not sure if this is issue with my changes or is this general
issue.

I would be grateful if anyone can test frame order with and without
postprocessing enabled on imx8. Take some dynamic video with a lot of short
scenes. It's pretty obvious when frames are out of order.


I checked on imx8 and cannot observe any such artifacts.

Andrzej

However, given that frames themself are correctly decoded and without
postprocessing in right order, that shouldn't block merging previous patches.
I tried few different videos and frames were all decoded correctly.

Best regards,
Jernej


Signed-off-by: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxx>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxxxx>
---
  .../staging/media/hantro/hantro_g2_vp9_dec.c  |  6 ++--
  drivers/staging/media/hantro/hantro_hw.h      |  1 +
  .../staging/media/hantro/hantro_postproc.c    | 31 +++++++++++++++++++
  drivers/staging/media/hantro/imx8m_vpu_hw.c   | 11 +++++++
  4 files changed, 46 insertions(+), 3 deletions(-)

diff --git a/drivers/staging/media/hantro/hantro_g2_vp9_dec.c b/drivers/
staging/media/hantro/hantro_g2_vp9_dec.c
index 7f827b9f0133..1a26be72c878 100644
--- a/drivers/staging/media/hantro/hantro_g2_vp9_dec.c
+++ b/drivers/staging/media/hantro/hantro_g2_vp9_dec.c
@@ -152,7 +152,7 @@ static void config_output(struct hantro_ctx *ctx,
  	hantro_reg_write(ctx->dev, &g2_out_dis, 0);
  	hantro_reg_write(ctx->dev, &g2_output_format, 0);
- luma_addr = vb2_dma_contig_plane_dma_addr(&dst->base.vb.vb2_buf,
0);
+	luma_addr = hantro_get_dec_buf_addr(ctx, &dst->base.vb.vb2_buf);
  	hantro_write_addr(ctx->dev, G2_OUT_LUMA_ADDR, luma_addr);
chroma_addr = luma_addr + chroma_offset(ctx, dec_params);
@@ -191,7 +191,7 @@ static void config_ref(struct hantro_ctx *ctx,
  	hantro_reg_write(ctx->dev, &ref_reg->hor_scale, (refw << 14) /
dst->vp9.width);
  	hantro_reg_write(ctx->dev, &ref_reg->ver_scale, (refh << 14) /
dst->vp9.height);
- luma_addr = vb2_dma_contig_plane_dma_addr(&buf->base.vb.vb2_buf,
0);
+	luma_addr = hantro_get_dec_buf_addr(ctx, &buf->base.vb.vb2_buf);
  	hantro_write_addr(ctx->dev, ref_reg->y_base, luma_addr);
chroma_addr = luma_addr + chroma_offset(ctx, dec_params);
@@ -236,7 +236,7 @@ static void config_ref_registers(struct hantro_ctx *ctx,
  	config_ref(ctx, dst, &ref_regs[1], dec_params, dec_params-
golden_frame_ts);
  	config_ref(ctx, dst, &ref_regs[2], dec_params, dec_params-
alt_frame_ts);
- mv_addr = vb2_dma_contig_plane_dma_addr(&mv_ref->base.vb.vb2_buf,
0) +
+	mv_addr = hantro_get_dec_buf_addr(ctx, &mv_ref->base.vb.vb2_buf) +
  		  mv_offset(ctx, dec_params);
  	hantro_write_addr(ctx->dev, G2_REF_MV_ADDR(0), mv_addr);
diff --git a/drivers/staging/media/hantro/hantro_hw.h b/drivers/staging/
media/hantro/hantro_hw.h
index 2961d399fd60..3d4a5dc1e6d5 100644
--- a/drivers/staging/media/hantro/hantro_hw.h
+++ b/drivers/staging/media/hantro/hantro_hw.h
@@ -274,6 +274,7 @@ extern const struct hantro_variant rk3399_vpu_variant;
  extern const struct hantro_variant sama5d4_vdec_variant;
extern const struct hantro_postproc_ops hantro_g1_postproc_ops;
+extern const struct hantro_postproc_ops hantro_g2_postproc_ops;
extern const u32 hantro_vp8_dec_mc_filter[8][6]; diff --git a/drivers/staging/media/hantro/hantro_postproc.c b/drivers/
staging/media/hantro/hantro_postproc.c
index 4549aec08feb..79a66d001738 100644
--- a/drivers/staging/media/hantro/hantro_postproc.c
+++ b/drivers/staging/media/hantro/hantro_postproc.c
@@ -11,6 +11,7 @@
  #include "hantro.h"
  #include "hantro_hw.h"
  #include "hantro_g1_regs.h"
+#include "hantro_g2_regs.h"
#define HANTRO_PP_REG_WRITE(vpu, reg_name, val) \
  { \
@@ -99,6 +100,21 @@ static void hantro_postproc_g1_enable(struct hantro_ctx
*ctx)
  	HANTRO_PP_REG_WRITE(vpu, display_width, ctx->dst_fmt.width);
  }
+static void hantro_postproc_g2_enable(struct hantro_ctx *ctx)
+{
+	struct hantro_dev *vpu = ctx->dev;
+	struct vb2_v4l2_buffer *dst_buf;
+	size_t chroma_offset = ctx->dst_fmt.width * ctx->dst_fmt.height;
+	dma_addr_t dst_dma;
+
+	dst_buf = hantro_get_dst_buf(ctx);
+	dst_dma = vb2_dma_contig_plane_dma_addr(&dst_buf->vb2_buf, 0);
+
+	hantro_write_addr(vpu, G2_RS_OUT_LUMA_ADDR, dst_dma);
+	hantro_write_addr(vpu, G2_RS_OUT_CHROMA_ADDR, dst_dma +
chroma_offset);
+	hantro_reg_write(vpu, &g2_out_rs_e, 1);
+}
+
  void hantro_postproc_free(struct hantro_ctx *ctx)
  {
  	struct hantro_dev *vpu = ctx->dev;
@@ -127,6 +143,9 @@ int hantro_postproc_alloc(struct hantro_ctx *ctx)
  	if (ctx->vpu_src_fmt->fourcc == V4L2_PIX_FMT_H264_SLICE)
  		buf_size += hantro_h264_mv_size(ctx->dst_fmt.width,
  						ctx-
dst_fmt.height);
+	else if (ctx->vpu_src_fmt->fourcc == V4L2_PIX_FMT_VP9_FRAME)
+		buf_size += hantro_vp9_mv_size(ctx->dst_fmt.width,
+					       ctx-
dst_fmt.height);
for (i = 0; i < num_buffers; ++i) {
  		struct hantro_aux_buf *priv = &ctx->postproc.dec_q[i];
@@ -152,6 +171,13 @@ static void hantro_postproc_g1_disable(struct
hantro_ctx *ctx)
  	HANTRO_PP_REG_WRITE_S(vpu, pipeline_en, 0x0);
  }
+static void hantro_postproc_g2_disable(struct hantro_ctx *ctx)
+{
+	struct hantro_dev *vpu = ctx->dev;
+
+	hantro_reg_write(vpu, &g2_out_rs_e, 0);
+}
+
  void hantro_postproc_disable(struct hantro_ctx *ctx)
  {
  	struct hantro_dev *vpu = ctx->dev;
@@ -172,3 +198,8 @@ const struct hantro_postproc_ops hantro_g1_postproc_ops
= {
  	.enable = hantro_postproc_g1_enable,
  	.disable = hantro_postproc_g1_disable,
  };
+
+const struct hantro_postproc_ops hantro_g2_postproc_ops = {
+	.enable = hantro_postproc_g2_enable,
+	.disable = hantro_postproc_g2_disable,
+};
diff --git a/drivers/staging/media/hantro/imx8m_vpu_hw.c b/drivers/staging/
media/hantro/imx8m_vpu_hw.c
index 455a107ffb02..1a43f6fceef9 100644
--- a/drivers/staging/media/hantro/imx8m_vpu_hw.c
+++ b/drivers/staging/media/hantro/imx8m_vpu_hw.c
@@ -132,6 +132,14 @@ static const struct hantro_fmt imx8m_vpu_dec_fmts[] = {
  	},
  };
+static const struct hantro_fmt imx8m_vpu_g2_postproc_fmts[] = {
+	{
+		.fourcc = V4L2_PIX_FMT_NV12,
+		.codec_mode = HANTRO_MODE_NONE,
+		.postprocessed = true,
+	},
+};
+
  static const struct hantro_fmt imx8m_vpu_g2_dec_fmts[] = {
  	{
  		.fourcc = V4L2_PIX_FMT_NV12_4L4,
@@ -301,6 +309,9 @@ const struct hantro_variant imx8mq_vpu_g2_variant = {
  	.dec_offset = 0x0,
  	.dec_fmts = imx8m_vpu_g2_dec_fmts,
  	.num_dec_fmts = ARRAY_SIZE(imx8m_vpu_g2_dec_fmts),
+	.postproc_fmts = imx8m_vpu_g2_postproc_fmts,
+	.num_postproc_fmts = ARRAY_SIZE(imx8m_vpu_g2_postproc_fmts),
+	.postproc_ops = &hantro_g2_postproc_ops,
  	.codec = HANTRO_HEVC_DECODER | HANTRO_VP9_DECODER,
  	.codec_ops = imx8mq_vpu_g2_codec_ops,
  	.init = imx8mq_vpu_hw_init,
--
2.17.1









[Index of Archives]     [Linux Driver Development]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux