Binding documentation for compatible 'mediatek,mt7621-sysc' has been updated
to be used as a reset provider. Align reset related bits and system controller
node with binding documentation along the dtsi file.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
---
drivers/staging/mt7621-dts/mt7621.dtsi | 27 ++++++++++++--------------
1 file changed, 12 insertions(+), 15 deletions(-)
diff --git a/drivers/staging/mt7621-dts/mt7621.dtsi b/drivers/staging/mt7621-dts/mt7621.dtsi
index 719ef28171f4..72b99d8b4647 100644
--- a/drivers/staging/mt7621-dts/mt7621.dtsi
+++ b/drivers/staging/mt7621-dts/mt7621.dtsi
@@ -1,6 +1,7 @@
#include <dt-bindings/interrupt-controller/mips-gic.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/mt7621-clk.h>
+#include <dt-bindings/reset/mt7621-reset.h>
/ {
#address-cells = <1>;
@@ -59,6 +60,7 @@ sysc: syscon@0 {
compatible = "mediatek,mt7621-sysc", "syscon";
reg = <0x0 0x100>;
#clock-cells = <1>;
+ #reset-cells = <1>;
ralink,memctl = <&memc>;
clock-output-names = "xtal", "cpu", "bus",
"50m", "125m", "150m",
@@ -88,7 +90,7 @@ i2c: i2c@900 {
clocks = <&sysc MT7621_CLK_I2C>;
clock-names = "i2c";
- resets = <&rstctrl 16>;
+ resets = <&sysc MT7621_RST_I2C>;
reset-names = "i2c";
#address-cells = <1>;
@@ -106,7 +108,7 @@ i2s: i2s@a00 {
clocks = <&sysc MT7621_CLK_I2S>;
clock-names = "i2s";
- resets = <&rstctrl 17>;
+ resets = <&sysc MT7621_RST_I2S>;
reset-names = "i2s";
interrupt-parent = <&gic>;
@@ -151,7 +153,7 @@ spi0: spi@b00 {
clocks = <&sysc MT7621_CLK_SPI>;
clock-names = "spi";
- resets = <&rstctrl 18>;
+ resets = <&sysc MT7621_RST_SPI>;
reset-names = "spi";
#address-cells = <1>;
@@ -167,7 +169,7 @@ gdma: gdma@2800 {
clocks = <&sysc MT7621_CLK_GDMA>;
clock-names = "gdma";
- resets = <&rstctrl 14>;
+ resets = <&sysc MT7621_RST_GDMA>;
reset-names = "dma";
interrupt-parent = <&gic>;
@@ -186,7 +188,7 @@ hsdma: hsdma@7000 {
clocks = <&sysc MT7621_CLK_HSDMA>;
clock-names = "hsdma";
- resets = <&rstctrl 5>;
+ resets = <&sysc MT7621_RST_HSDMA>;
reset-names = "hsdma";
interrupt-parent = <&gic>;
@@ -286,11 +288,6 @@ pinmux {
};
};
- rstctrl: rstctrl {
- compatible = "ralink,rt2880-reset";
- #reset-cells = <1>;
- };
-
sdhci: sdhci@1E130000 {
status = "disabled";
@@ -383,7 +380,7 @@ ethernet: ethernet@1e100000 {
#address-cells = <1>;
#size-cells = <0>;
- resets = <&rstctrl 6 &rstctrl 23>;
+ resets = <&sysc MT7621_CLK_FE &sysc MT7621_CLK_ETH>;
reset-names = "fe", "eth";
interrupt-parent = <&gic>;
@@ -428,7 +425,7 @@ switch0: switch0@0 {
#size-cells = <0>;
reg = <0>;
mediatek,mcm;
- resets = <&rstctrl 2>;
+ resets = <&sysc MT7621_RST_MCM>;
reset-names = "mcm";
interrupt-controller;
#interrupt-cells = <1>;
@@ -514,7 +511,7 @@ pcie@0,0 {
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>;
- resets = <&rstctrl 24>;
+ resets = <&sysc MT7621_RST_PCIE0>;
clocks = <&sysc MT7621_CLK_PCIE0>;
phys = <&pcie0_phy 1>;
phy-names = "pcie-phy0";
@@ -529,7 +526,7 @@ pcie@1,0 {
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>;
- resets = <&rstctrl 25>;
+ resets = <&sysc MT7621_RST_PCIE1>;
clocks = <&sysc MT7621_CLK_PCIE1>;
phys = <&pcie0_phy 1>;
phy-names = "pcie-phy1";
@@ -544,7 +541,7 @@ pcie@2,0 {
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
- resets = <&rstctrl 26>;
+ resets = <&sysc MT7621_RST_PCIE2>;
clocks = <&sysc MT7621_CLK_PCIE2>;
phys = <&pcie2_phy 0>;
phy-names = "pcie-phy2";
--
2.33.0
