[PATCH v2] media: hantro: Auto generate the AXI ID to avoid conflicts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The AXI ID is an AXI bus configuration for improve bus performance. 
If read and write operations use different ID the operations can be paralleled,
whereas when they have the same ID the operations will be serialized. 
Right now, the write ID is fixed to 0 but we can set it to 0xff to get auto
generated ID to avoid possible conflicts.

This change has no functional changes, but seems reasonable to let the
hardware to autogenerate the ID instead of hardcoding in software.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
---
changes in version 2:
- Add a macro with comment about the value.
- Make VP8 and H264 codecs use the macro.
- fluster tests on the both codecs show no regressions.
  ./fluster.py run -ts VP8-TEST-VECTORS -d GStreamer-VP8-V4L2SL-Gst1.0
  ./fluster.py run -ts JVT-AVC_V1 -d GStreamer-H.264-V4L2SL-Gst1.0
- The both codec write other bits in the same configuration register
  so the simplest solution is to use the macro in the both cases.

 drivers/staging/media/hantro/hantro_g1_h264_dec.c | 2 +-
 drivers/staging/media/hantro/hantro_g1_regs.h     | 2 ++
 drivers/staging/media/hantro/hantro_g1_vp8_dec.c  | 3 ++-
 3 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/media/hantro/hantro_g1_h264_dec.c b/drivers/staging/media/hantro/hantro_g1_h264_dec.c
index 236ce24ca00c..f49dbfb8a843 100644
--- a/drivers/staging/media/hantro/hantro_g1_h264_dec.c
+++ b/drivers/staging/media/hantro/hantro_g1_h264_dec.c
@@ -29,7 +29,7 @@ static void set_params(struct hantro_ctx *ctx, struct vb2_v4l2_buffer *src_buf)
 	u32 reg;
 
 	/* Decoder control register 0. */
-	reg = G1_REG_DEC_CTRL0_DEC_AXI_WR_ID(0x0);
+	reg = G1_REG_DEC_CTRL0_DEC_AXI_AUTO;
 	if (sps->flags & V4L2_H264_SPS_FLAG_MB_ADAPTIVE_FRAME_FIELD)
 		reg |= G1_REG_DEC_CTRL0_SEQ_MBAFF_E;
 	if (sps->profile_idc > 66) {
diff --git a/drivers/staging/media/hantro/hantro_g1_regs.h b/drivers/staging/media/hantro/hantro_g1_regs.h
index c1756e3d5391..c623b3b0be18 100644
--- a/drivers/staging/media/hantro/hantro_g1_regs.h
+++ b/drivers/staging/media/hantro/hantro_g1_regs.h
@@ -68,6 +68,8 @@
 #define     G1_REG_DEC_CTRL0_PICORD_COUNT_E		BIT(9)
 #define     G1_REG_DEC_CTRL0_DEC_AHB_HLOCK_E		BIT(8)
 #define     G1_REG_DEC_CTRL0_DEC_AXI_WR_ID(x)		(((x) & 0xff) << 0)
+/* Setting AXI ID to 0xff to get auto generated ID to avoid possible conflicts */
+#define     G1_REG_DEC_CTRL0_DEC_AXI_AUTO		G1_REG_DEC_CTRL0_DEC_AXI_WR_ID(0xff)
 #define G1_REG_DEC_CTRL1				0x010
 #define     G1_REG_DEC_CTRL1_PIC_MB_WIDTH(x)		(((x) & 0x1ff) << 23)
 #define     G1_REG_DEC_CTRL1_MB_WIDTH_OFF(x)		(((x) & 0xf) << 19)
diff --git a/drivers/staging/media/hantro/hantro_g1_vp8_dec.c b/drivers/staging/media/hantro/hantro_g1_vp8_dec.c
index 6180b23e7d94..851eb67f19f5 100644
--- a/drivers/staging/media/hantro/hantro_g1_vp8_dec.c
+++ b/drivers/staging/media/hantro/hantro_g1_vp8_dec.c
@@ -463,7 +463,8 @@ int hantro_g1_vp8_dec_run(struct hantro_ctx *ctx)
 	      G1_REG_CONFIG_DEC_MAX_BURST(16);
 	vdpu_write_relaxed(vpu, reg, G1_REG_CONFIG);
 
-	reg = G1_REG_DEC_CTRL0_DEC_MODE(10);
+	reg = G1_REG_DEC_CTRL0_DEC_MODE(10) |
+	      G1_REG_DEC_CTRL0_DEC_AXI_AUTO;
 	if (!V4L2_VP8_FRAME_IS_KEY_FRAME(hdr))
 		reg |= G1_REG_DEC_CTRL0_PIC_INTER_E;
 	if (!(hdr->flags & V4L2_VP8_FRAME_FLAG_MB_NO_SKIP_COEFF))
-- 
2.30.2





[Index of Archives]     [Linux Driver Development]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux