[PATCH v13 4/5] clk: clocking-wizard: Fix the reconfig for 5.2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The 5.2 the reconfig is triggered by writing 7 followed by
2 to the reconfig reg. Add the same. Also 6.0 is backward
compatible so it should be fine.

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
---
 drivers/clk/clk-xlnx-clock-wizard.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/clk-xlnx-clock-wizard.c b/drivers/clk/clk-xlnx-clock-wizard.c
index 1e0818eb0435..61c40e06e381 100644
--- a/drivers/clk/clk-xlnx-clock-wizard.c
+++ b/drivers/clk/clk-xlnx-clock-wizard.c
@@ -44,6 +44,8 @@
 #define WZRD_DR_INIT_REG_OFFSET		0x25C
 #define WZRD_DR_DIV_TO_PHASE_OFFSET	4
 #define WZRD_DR_BEGIN_DYNA_RECONF	0x03
+#define WZRD_DR_BEGIN_DYNA_RECONF_5_2	0x07
+#define WZRD_DR_BEGIN_DYNA_RECONF1_5_2	0x02
 
 #define WZRD_USEC_POLL		10
 #define WZRD_TIMEOUT_POLL		1000
@@ -165,7 +167,9 @@ static int clk_wzrd_dynamic_reconfig(struct clk_hw *hw, unsigned long rate,
 		goto err_reconfig;
 
 	/* Initiate reconfiguration */
-	writel(WZRD_DR_BEGIN_DYNA_RECONF,
+	writel(WZRD_DR_BEGIN_DYNA_RECONF_5_2,
+	       divider->base + WZRD_DR_INIT_REG_OFFSET);
+	writel(WZRD_DR_BEGIN_DYNA_RECONF1_5_2,
 	       divider->base + WZRD_DR_INIT_REG_OFFSET);
 
 	/* Check status register */
@@ -224,7 +228,7 @@ static int clk_wzrd_dynamic_reconfig_f(struct clk_hw *hw, unsigned long rate,
 	struct clk_wzrd_divider *divider = to_clk_wzrd_divider(hw);
 	void __iomem *div_addr = divider->base + divider->offset;
 
-	rate_div = ((parent_rate * 1000) / rate);
+	rate_div = DIV_ROUND_DOWN_ULL(parent_rate * 1000, rate);
 	clockout0_div = rate_div / 1000;
 
 	pre = DIV_ROUND_CLOSEST((parent_rate * 1000), rate);
@@ -246,7 +250,9 @@ static int clk_wzrd_dynamic_reconfig_f(struct clk_hw *hw, unsigned long rate,
 		return err;
 
 	/* Initiate reconfiguration */
-	writel(WZRD_DR_BEGIN_DYNA_RECONF,
+	writel(WZRD_DR_BEGIN_DYNA_RECONF_5_2,
+	       divider->base + WZRD_DR_INIT_REG_OFFSET);
+	writel(WZRD_DR_BEGIN_DYNA_RECONF1_5_2,
 	       divider->base + WZRD_DR_INIT_REG_OFFSET);
 
 	/* Check status register */
-- 
2.25.1





[Index of Archives]     [Linux Driver Development]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux