The IS_HARDWARE_TYPE_8188* macros are not needed because the driver
is for RTL8188EU chips, remove them.
Signed-off-by: Michael Straube <straube.linux@xxxxxxxxx>
---
drivers/staging/r8188eu/hal/rtl8188e_mp.c | 20 +++++++++-----------
drivers/staging/r8188eu/include/hal_intf.h | 11 -----------
2 files changed, 9 insertions(+), 22 deletions(-)
diff --git a/drivers/staging/r8188eu/hal/rtl8188e_mp.c b/drivers/staging/r8188eu/hal/rtl8188e_mp.c
index ee0c96890cf3..eb9e32dfcbe7 100644
--- a/drivers/staging/r8188eu/hal/rtl8188e_mp.c
+++ b/drivers/staging/r8188eu/hal/rtl8188e_mp.c
@@ -506,12 +506,11 @@ void Hal_SetSingleToneTx(struct adapter *pAdapter, u8 bStart)
if (bStart) {
/* Start Single Tone. */
/* <20120326, Kordan> To amplify the power of tone for Xtal calibration. (asked by Edlu) */
- if (IS_HARDWARE_TYPE_8188E(pAdapter)) {
- reg58 = PHY_QueryRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask);
- reg58 &= 0xFFFFFFF0;
- reg58 += 2;
- PHY_SetRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask, reg58);
- }
+ reg58 = PHY_QueryRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask);
+ reg58 &= 0xFFFFFFF0;
+ reg58 += 2;
+ PHY_SetRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask, reg58);
+
PHY_SetBBReg(pAdapter, rFPGA0_RFMOD, bCCKEn, 0x0);
PHY_SetBBReg(pAdapter, rFPGA0_RFMOD, bOFDMEn, 0x0);
@@ -528,11 +527,10 @@ void Hal_SetSingleToneTx(struct adapter *pAdapter, u8 bStart)
/* Stop Single Tone. */
/* <20120326, Kordan> To amplify the power of tone for Xtal calibration. (asked by Edlu) */
/* <20120326, Kordan> Only in single tone mode. (asked by Edlu) */
- if (IS_HARDWARE_TYPE_8188E(pAdapter)) {
- reg58 = PHY_QueryRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask);
- reg58 &= 0xFFFFFFF0;
- PHY_SetRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask, reg58);
- }
+ reg58 = PHY_QueryRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask);
+ reg58 &= 0xFFFFFFF0;
+ PHY_SetRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask, reg58);
+
write_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn, 0x1);
write_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn, 0x1);
diff --git a/drivers/staging/r8188eu/include/hal_intf.h b/drivers/staging/r8188eu/include/hal_intf.h
index bbdbbf9697b1..117a98e5444e 100644
--- a/drivers/staging/r8188eu/include/hal_intf.h
+++ b/drivers/staging/r8188eu/include/hal_intf.h
@@ -283,17 +283,6 @@ enum hardware_type {
HARDWARE_TYPE_MAX,
};
-/* RTL8188E Series */
-#define IS_HARDWARE_TYPE_8188EE(_Adapter) \
-(((struct adapter *)_Adapter)->HardwareType == HARDWARE_TYPE_RTL8188EE)
-#define IS_HARDWARE_TYPE_8188EU(_Adapter) \
-(((struct adapter *)_Adapter)->HardwareType == HARDWARE_TYPE_RTL8188EU)
-#define IS_HARDWARE_TYPE_8188ES(_Adapter) \
-(((struct adapter *)_Adapter)->HardwareType == HARDWARE_TYPE_RTL8188ES)
-#define IS_HARDWARE_TYPE_8188E(_Adapter) \
-(IS_HARDWARE_TYPE_8188EE(_Adapter) || IS_HARDWARE_TYPE_8188EU(_Adapter) || \
- IS_HARDWARE_TYPE_8188ES(_Adapter))
-
#define GET_EEPROM_EFUSE_PRIV(adapter) (&adapter->eeprompriv)
#define is_boot_from_eeprom(adapter) (adapter->eeprompriv.EepromOrEfuse)
--
2.33.0
