[PATCH v2 1/3] staging/rtl8192u: Avoid CamelCase in names of variables

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Avoid CameCase in the names of all local variables inside the function
rtl8192_phy_SwChnlStepByStep().

Signed-off-by: Len Baker <len.baker@xxxxxxx>
---
 drivers/staging/rtl8192u/r819xU_phy.c | 95 +++++++++++++--------------
 1 file changed, 47 insertions(+), 48 deletions(-)

diff --git a/drivers/staging/rtl8192u/r819xU_phy.c b/drivers/staging/rtl8192u/r819xU_phy.c
index 37b82553412e..6a67708cdd89 100644
--- a/drivers/staging/rtl8192u/r819xU_phy.c
+++ b/drivers/staging/rtl8192u/r819xU_phy.c
@@ -1185,30 +1185,30 @@ static u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel,
 				       u8 *stage, u8 *step, u32 *delay)
 {
 	struct r8192_priv *priv = ieee80211_priv(dev);
-	struct sw_chnl_cmd   *PreCommonCmd;
-	u32		   PreCommonCmdCnt;
-	struct sw_chnl_cmd   *PostCommonCmd;
-	u32		   PostCommonCmdCnt;
-	struct sw_chnl_cmd   *RfDependCmd;
-	u32		   RfDependCmdCnt;
-	struct sw_chnl_cmd  *CurrentCmd = NULL;
-	u8		   e_rfpath;
-	bool		   ret;
-
-	PreCommonCmd = kzalloc(sizeof(*PreCommonCmd) * MAX_PRECMD_CNT, GFP_KERNEL);
-	if (!PreCommonCmd)
+	struct sw_chnl_cmd *pre_cmd;
+	u32 pre_cmd_cnt;
+	struct sw_chnl_cmd *post_cmd;
+	u32 post_cmd_cnt;
+	struct sw_chnl_cmd *rf_cmd;
+	u32 rf_cmd_cnt;
+	struct sw_chnl_cmd *current_cmd = NULL;
+	u8 e_rfpath;
+	bool ret;
+
+	pre_cmd = kzalloc(sizeof(*pre_cmd) * MAX_PRECMD_CNT, GFP_KERNEL);
+	if (!pre_cmd)
 		return false;

-	PostCommonCmd = kzalloc(sizeof(*PostCommonCmd) * MAX_POSTCMD_CNT, GFP_KERNEL);
-	if (!PostCommonCmd) {
-		kfree(PreCommonCmd);
+	post_cmd = kzalloc(sizeof(*post_cmd) * MAX_POSTCMD_CNT, GFP_KERNEL);
+	if (!post_cmd) {
+		kfree(pre_cmd);
 		return false;
 	}

-	RfDependCmd = kzalloc(sizeof(*RfDependCmd) * MAX_RFDEPENDCMD_CNT, GFP_KERNEL);
-	if (!RfDependCmd) {
-		kfree(PreCommonCmd);
-		kfree(PostCommonCmd);
+	rf_cmd = kzalloc(sizeof(*rf_cmd) * MAX_RFDEPENDCMD_CNT, GFP_KERNEL);
+	if (!rf_cmd) {
+		kfree(pre_cmd);
+		kfree(post_cmd);
 		return false;
 	}

@@ -1225,21 +1225,20 @@ static u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel,
 	/* FIXME: need to check whether channel is legal or not here */

 	/* <1> Fill up pre common command. */
-	PreCommonCmdCnt = 0;
-	rtl8192_phy_SetSwChnlCmdArray(PreCommonCmd, PreCommonCmdCnt++,
+	pre_cmd_cnt = 0;
+	rtl8192_phy_SetSwChnlCmdArray(pre_cmd, pre_cmd_cnt++,
 				      MAX_PRECMD_CNT, CMD_ID_SET_TX_PWR_LEVEL,
 				      0, 0, 0);
-	rtl8192_phy_SetSwChnlCmdArray(PreCommonCmd, PreCommonCmdCnt++,
+	rtl8192_phy_SetSwChnlCmdArray(pre_cmd, pre_cmd_cnt++,
 				      MAX_PRECMD_CNT, CMD_ID_END, 0, 0, 0);

 	/* <2> Fill up post common command. */
-	PostCommonCmdCnt = 0;
-
-	rtl8192_phy_SetSwChnlCmdArray(PostCommonCmd, PostCommonCmdCnt++,
+	post_cmd_cnt = 0;
+	rtl8192_phy_SetSwChnlCmdArray(post_cmd, post_cmd_cnt++,
 				      MAX_POSTCMD_CNT, CMD_ID_END, 0, 0, 0);

 	/* <3> Fill up RF dependent command. */
-	RfDependCmdCnt = 0;
+	rf_cmd_cnt = 0;
 	switch (priv->rf_chip) {
 	case RF_8225:
 		if (!(channel >= 1 && channel <= 14)) {
@@ -1249,13 +1248,13 @@ static u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel,
 			ret = true;
 			goto out;
 		}
-		rtl8192_phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++,
+		rtl8192_phy_SetSwChnlCmdArray(rf_cmd, rf_cmd_cnt++,
 					      MAX_RFDEPENDCMD_CNT,
 					      CMD_ID_RF_WRITE_REG,
 					      rZebra1_Channel,
 					      RF_CHANNEL_TABLE_ZEBRA[channel],
 					      10);
-		rtl8192_phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++,
+		rtl8192_phy_SetSwChnlCmdArray(rf_cmd, rf_cmd_cnt++,
 					      MAX_RFDEPENDCMD_CNT,
 					      CMD_ID_END, 0, 0, 0);
 		break;
@@ -1269,11 +1268,11 @@ static u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel,
 			ret = true;
 			goto out;
 		}
-		rtl8192_phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++,
+		rtl8192_phy_SetSwChnlCmdArray(rf_cmd, rf_cmd_cnt++,
 					      MAX_RFDEPENDCMD_CNT,
 					      CMD_ID_RF_WRITE_REG,
 					      rZebra1_Channel, channel, 10);
-		rtl8192_phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++,
+		rtl8192_phy_SetSwChnlCmdArray(rf_cmd, rf_cmd_cnt++,
 					      MAX_RFDEPENDCMD_CNT,
 					      CMD_ID_END, 0, 0, 0);
 		break;
@@ -1290,19 +1289,19 @@ static u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel,
 	do {
 		switch (*stage) {
 		case 0:
-			CurrentCmd = &PreCommonCmd[*step];
+			current_cmd = &pre_cmd[*step];
 			break;
 		case 1:
-			CurrentCmd = &RfDependCmd[*step];
+			current_cmd = &rf_cmd[*step];
 			break;
 		case 2:
-			CurrentCmd = &PostCommonCmd[*step];
+			current_cmd = &post_cmd[*step];
 			break;
 		}

-		if (CurrentCmd->cmd_id == CMD_ID_END) {
+		if (current_cmd->cmd_id == CMD_ID_END) {
 			if ((*stage) == 2) {
-				(*delay) = CurrentCmd->ms_delay;
+				*delay = current_cmd->ms_delay;
 				ret = true;
 				goto out;
 			}
@@ -1311,31 +1310,31 @@ static u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel,
 			continue;
 		}

-		switch (CurrentCmd->cmd_id) {
+		switch (current_cmd->cmd_id) {
 		case CMD_ID_SET_TX_PWR_LEVEL:
 			if (priv->card_8192_version == VERSION_819XU_A)
 				/* consider it later! */
 				rtl8192_SetTxPowerLevel(dev, channel);
 			break;
 		case CMD_ID_WRITE_PORT_ULONG:
-			write_nic_dword(dev, CurrentCmd->para_1,
-					CurrentCmd->para_2);
+			write_nic_dword(dev, current_cmd->para_1,
+					current_cmd->para_2);
 			break;
 		case CMD_ID_WRITE_PORT_USHORT:
-			write_nic_word(dev, CurrentCmd->para_1,
-				       (u16)CurrentCmd->para_2);
+			write_nic_word(dev, current_cmd->para_1,
+				       (u16)current_cmd->para_2);
 			break;
 		case CMD_ID_WRITE_PORT_UCHAR:
-			write_nic_byte(dev, CurrentCmd->para_1,
-				       (u8)CurrentCmd->para_2);
+			write_nic_byte(dev, current_cmd->para_1,
+				       (u8)current_cmd->para_2);
 			break;
 		case CMD_ID_RF_WRITE_REG:
 			for (e_rfpath = 0; e_rfpath < RF90_PATH_MAX; e_rfpath++) {
 				rtl8192_phy_SetRFReg(dev,
 						     (enum rf90_radio_path_e)e_rfpath,
-						     CurrentCmd->para_1,
+						     current_cmd->para_1,
 						     bZebra1_ChannelNum,
-						     CurrentCmd->para_2);
+						     current_cmd->para_2);
 			}
 			break;
 		default:
@@ -1345,14 +1344,14 @@ static u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel,
 		break;
 	} while (true);

-	(*delay) = CurrentCmd->ms_delay;
+	*delay = current_cmd->ms_delay;
 	(*step)++;
 	ret = false;

 out:
-	kfree(PreCommonCmd);
-	kfree(PostCommonCmd);
-	kfree(RfDependCmd);
+	kfree(pre_cmd);
+	kfree(post_cmd);
+	kfree(rf_cmd);

 	return ret;
 }
--
2.25.1





[Index of Archives]     [Linux Driver Development]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux