[PATCH 1/2] staging: r8188eu: Use usb_control_msg_recv/send() in usbctrl_vendorreq()

["Fabio M. De Francesco" <fmdefrancesco@xxxxxxxxx>]

Replace usb_control_msg() with the new usb_control_msg_recv() and
usb_control_msg_send() API of USB Core in usbctrl_vendorreq().

Suggested-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@xxxxxxxxx>
---

Thanks to Pavel Skripkin <paskripkin@xxxxxxxxx> for his review of the
RFC patch.
 
drivers/staging/r8188eu/hal/usb_ops_linux.c | 25 ++++++++++-----------
1 file changed, 12 insertions(+), 13 deletions(-)

diff --git a/drivers/staging/r8188eu/hal/usb_ops_linux.c b/drivers/staging/r8188eu/hal/usb_ops_linux.c
index a93d5cfe4635..6f51660b967a 100644
--- a/drivers/staging/r8188eu/hal/usb_ops_linux.c
+++ b/drivers/staging/r8188eu/hal/usb_ops_linux.c
@@ -15,9 +15,8 @@ static int usbctrl_vendorreq(struct intf_hdl *pintfhdl, u16 value, void *pdata,
 	struct adapter	*adapt = pintfhdl->padapter;
 	struct dvobj_priv  *dvobjpriv = adapter_to_dvobj(adapt);
 	struct usb_device *udev = dvobjpriv->pusbdev;
-	unsigned int pipe;
+	u8 pipe;
 	int status = 0;
-	u8 reqtype;
 	u8 *pIo_buf;
 	int vendorreq_times = 0;
 
@@ -44,22 +43,22 @@ static int usbctrl_vendorreq(struct intf_hdl *pintfhdl, u16 value, void *pdata,
 	}
 
 	while (++vendorreq_times <= MAX_USBCTRL_VENDORREQ_TIMES) {
-		memset(pIo_buf, 0, len);
-
 		if (requesttype == 0x01) {
-			pipe = usb_rcvctrlpipe(udev, 0);/* read_in */
-			reqtype =  REALTEK_USB_VENQT_READ;
+			status = usb_control_msg_recv(udev, pipe, REALTEK_USB_VENQT_CMD_REQ,
+						      REALTEK_USB_VENQT_READ, value,
+						      REALTEK_USB_VENQT_CMD_IDX,
+						      pIo_buf, len, RTW_USB_CONTROL_MSG_TIMEOUT,
+						      GFP_KERNEL);
 		} else {
-			pipe = usb_sndctrlpipe(udev, 0);/* write_out */
-			reqtype =  REALTEK_USB_VENQT_WRITE;
 			memcpy(pIo_buf, pdata, len);
+			status = usb_control_msg_send(udev, pipe, REALTEK_USB_VENQT_CMD_REQ,
+						      REALTEK_USB_VENQT_WRITE, value,
+						      REALTEK_USB_VENQT_CMD_IDX,
+						      pIo_buf, len, RTW_USB_CONTROL_MSG_TIMEOUT,
+						      GFP_KERNEL);
 		}
 
-		status = usb_control_msg(udev, pipe, REALTEK_USB_VENQT_CMD_REQ,
-					 reqtype, value, REALTEK_USB_VENQT_CMD_IDX,
-					 pIo_buf, len, RTW_USB_CONTROL_MSG_TIMEOUT);
-
-		if (status == len) {   /*  Success this control transfer. */
+		if (!status) {   /*  Success this control transfer. */
 			rtw_reset_continual_urb_error(dvobjpriv);
 			if (requesttype == 0x01)
 				memcpy(pdata, pIo_buf,  len);
-- 
2.32.0