Hi Martin, On Mon, Jul 26, 2021 at 10:21:14AM +0200, Martin Kepplinger wrote: > hi, > > This patch series adds a driver for the i.MX8MQ CSI MIPI receiver / controller. > > It includes the driver, the dt-bindings and the DT addition to the SoC dtsi. > I test it using libcamera. Thanks to Laurent who helped a lot. I'm happy for > any feedback, No more feedback from me :-) I'll take patches 1/3 and 2/3 in my tree and send a pull request. Shawn, could you please review 3/3 ? > revision history > ---------------- > v9: (thank you Laurent) > * improve getting the esc clock rate for hs_settle > > v8: (thank you Laurent) > * calculate hs_settle for any clk rate and mode > * add reviewed-by tag > https://lore.kernel.org/linux-media/20210723101217.1954805-1-martin.kepplinger@xxxxxxx/T/ > > v7: (thank you Laurent and Rob) > * fix the binding example (include the reset driver) > * use pm_runtime_resume_and_get() > * fix some logic in init_cfg() > * add some useful code comments and fix minor bits found by Laurent in v6 > https://lore.kernel.org/linux-media/20210716102244.581182-1-martin.kepplinger@xxxxxxx/T/#t > > v6: (thank you Laurent and Rob) > * add reviewed-by tag to binding > * statically allocate clk_bulk_data > * fix how the hs_settle value is applied > * remove s_power calls > * remove the link_setup() callback implementation and make the link immutable > * more cleanups according to Laurents' review from v5 > https://lore.kernel.org/linux-media/20210714111931.324485-1-martin.kepplinger@xxxxxxx/ > > v5: (thank you Laurent) > * fix reset usage by using the already supported reset controller driver > * remove clko2 (totally unrelated clock / had been included by accident) > * rename pxl clock to ui > https://lore.kernel.org/linux-media/20210618095753.114557-1-martin.kepplinger@xxxxxxx/ > > v4: (thank you Rob and Marco) > * create fsl,mipi-phy-gpr custom dt property instead of confusing "phy" > * add imx8mq-specific compatibile to imx8mq.dtsi for future use > https://lore.kernel.org/linux-media/20210614121522.2944593-1-martin.kepplinger@xxxxxxx/ > > v3: (thank you, Rob and Laurent) > among minor other things according to v2 review, changes include: > * better describe the clocks > * rename DT property "phy-reset" to "reset" and "phy-gpr" to "phy" > https://lore.kernel.org/linux-media/20210608104128.1616028-1-martin.kepplinger@xxxxxxx/T/#t > > v2: (thank you, Dan and Guido) > among fixes according to v1 reviews, changes include: > * remove status property from dt-bindings example > * define a few bits in order to have less magic values > * use "imx8mq_mipi_csi_" as local function prefix > * read DT properties only during probe() > * remove dead code (log_status) > * add imx8mq_mipi_csi_release_icc() > * fix imx8mq_mipi_csi_init_icc() > https://lore.kernel.org/linux-media/20210531112326.90094-1-martin.kepplinger@xxxxxxx/ > > v1: > https://lore.kernel.org/linux-media/20210527075407.3180744-1-martin.kepplinger@xxxxxxx/T/#t > > > Martin Kepplinger (3): > dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and > controller > media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller > arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions > > .../bindings/media/nxp,imx8mq-mipi-csi2.yaml | 174 ++++ > arch/arm64/boot/dts/freescale/imx8mq.dtsi | 104 ++ > drivers/staging/media/imx/Makefile | 1 + > drivers/staging/media/imx/imx8mq-mipi-csi2.c | 976 ++++++++++++++++++ > 4 files changed, 1255 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml > create mode 100644 drivers/staging/media/imx/imx8mq-mipi-csi2.c -- Regards, Laurent Pinchart
