On Mon, Jun 21, 2021 at 09:49:00PM +0800, Coiby Xu wrote:
> @@ -524,8 +523,8 @@ static int qlge_set_routing_reg(struct qlge_adapter *qdev, u32 index, u32 mask,
> {
> value = RT_IDX_DST_DFLT_Q | /* dest */
> RT_IDX_TYPE_NICQ | /* type */
> - (RT_IDX_IP_CSUM_ERR_SLOT <<
> - RT_IDX_IDX_SHIFT); /* index */
> + (RT_IDX_IP_CSUM_ERR_SLOT
> + << RT_IDX_IDX_SHIFT); /* index */
The original is not great but the new indenting is definitely worse.
It might look nicer with the comments moved in the front? Why does
RT_IDX_IDX_SHIFT have two IDX strings?
/* value = dest | type | index; */
value = RT_IDX_DST_DFLT_Q |
RT_IDX_TYPE_NICQ |
(RT_IDX_IP_CSUM_ERR_SLOT << RT_IDX_IDX_SHIFT);
> break;
> }
> case RT_IDX_TU_CSUM_ERR: /* Pass up TCP/UDP CSUM error frames. */
> @@ -554,7 +553,8 @@ static int qlge_set_routing_reg(struct qlge_adapter *qdev, u32 index, u32 mask,
> {
> value = RT_IDX_DST_DFLT_Q | /* dest */
> RT_IDX_TYPE_NICQ | /* type */
> - (RT_IDX_MCAST_MATCH_SLOT << RT_IDX_IDX_SHIFT);/* index */
> + (RT_IDX_MCAST_MATCH_SLOT
> + << RT_IDX_IDX_SHIFT); /* index */
Original is better.
> break;
> }
> case RT_IDX_RSS_MATCH: /* Pass up matched RSS frames. */
> @@ -648,15 +648,15 @@ static int qlge_read_flash_word(struct qlge_adapter *qdev, int offset, __le32 *d
> {
> int status = 0;
> /* wait for reg to come ready */
> - status = qlge_wait_reg_rdy(qdev,
> - FLASH_ADDR, FLASH_ADDR_RDY, FLASH_ADDR_ERR);
> + status = qlge_wait_reg_rdy(qdev, FLASH_ADDR, FLASH_ADDR_RDY,
> + FLASH_ADDR_ERR);
> if (status)
> goto exit;
> /* set up for reg read */
> qlge_write32(qdev, FLASH_ADDR, FLASH_ADDR_R | offset);
> /* wait for reg to come ready */
> - status = qlge_wait_reg_rdy(qdev,
> - FLASH_ADDR, FLASH_ADDR_RDY, FLASH_ADDR_ERR);
> + status = qlge_wait_reg_rdy(qdev, FLASH_ADDR, FLASH_ADDR_RDY,
> + FLASH_ADDR_ERR);
> if (status)
> goto exit;
> /* This data is stored on flash as an array of
> @@ -792,8 +792,8 @@ static int qlge_write_xgmac_reg(struct qlge_adapter *qdev, u32 reg, u32 data)
> {
> int status;
> /* wait for reg to come ready */
> - status = qlge_wait_reg_rdy(qdev,
> - XGMAC_ADDR, XGMAC_ADDR_RDY, XGMAC_ADDR_XME);
> + status = qlge_wait_reg_rdy(qdev, XGMAC_ADDR, XGMAC_ADDR_RDY,
> + XGMAC_ADDR_XME);
> if (status)
> return status;
> /* write the data to the data reg */
> @@ -811,15 +811,15 @@ int qlge_read_xgmac_reg(struct qlge_adapter *qdev, u32 reg, u32 *data)
> {
> int status = 0;
> /* wait for reg to come ready */
> - status = qlge_wait_reg_rdy(qdev,
> - XGMAC_ADDR, XGMAC_ADDR_RDY, XGMAC_ADDR_XME);
> + status = qlge_wait_reg_rdy(qdev, XGMAC_ADDR, XGMAC_ADDR_RDY,
> + XGMAC_ADDR_XME);
Need a blank line after the declaration block.
> if (status)
> goto exit;
> /* set up for reg read */
> qlge_write32(qdev, XGMAC_ADDR, reg | XGMAC_ADDR_R);
> /* wait for reg to come ready */
> - status = qlge_wait_reg_rdy(qdev,
> - XGMAC_ADDR, XGMAC_ADDR_RDY, XGMAC_ADDR_XME);
> + status = qlge_wait_reg_rdy(qdev, XGMAC_ADDR, XGMAC_ADDR_RDY,
> + XGMAC_ADDR_XME);
> if (status)
> goto exit;
> /* get the data */
regards,
dan carpenter
