Remove all DBG_88E calls from hal/rtl8188e_cmd.c as this macro is
unnecessary, and many of these calls are dubious in terms of necessity.
Removing all calls will ultimately allow the removal of the macro
itself.
Signed-off-by: Phillip Potter <phil@xxxxxxxxxxxxxxxx>
---
drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c | 42 +++-----------------
1 file changed, 6 insertions(+), 36 deletions(-)
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c b/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c
index d6c83e4fb105..19c8976c2e01 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c
@@ -55,11 +55,8 @@ static s32 FillH2CCmd_88E(struct adapter *adapt, u8 ElementID, u32 CmdLen, u8 *p
u32 h2c_cmd_ex = 0;
s32 ret = _FAIL;
- if (!adapt->bFWReady) {
- DBG_88E("%s(): return H2C cmd because fw is not ready\n",
- __func__);
+ if (!adapt->bFWReady)
return ret;
- }
if (!pCmdBuffer)
goto exit;
@@ -71,10 +68,8 @@ static s32 FillH2CCmd_88E(struct adapter *adapt, u8 ElementID, u32 CmdLen, u8 *p
/* pay attention to if race condition happened in H2C cmd setting. */
h2c_box_num = adapt->HalData->LastHMEBoxNum;
- if (!_is_fw_read_cmd_down(adapt, h2c_box_num)) {
- DBG_88E(" fw read cmd failed...\n");
+ if (!_is_fw_read_cmd_down(adapt, h2c_box_num))
goto exit;
- }
*(u8 *)(&h2c_cmd) = ElementID;
@@ -134,9 +129,6 @@ void rtw_hal_add_ra_tid(struct adapter *pAdapter, u32 bitmap, u8 arg, u8 rssi_le
bitmap &= 0x0fffffff;
- DBG_88E("%s=> mac_id:%d, raid:%d, ra_bitmap=0x%x, shortGIrate=0x%02x\n",
- __func__, macid, raid, bitmap, shortGIrate);
-
ODM_RA_UpdateRateInfo_8188E(odmpriv, macid, raid, bitmap, shortGIrate);
}
@@ -146,9 +138,6 @@ void rtl8188e_set_FwPwrMode_cmd(struct adapter *adapt, u8 Mode)
struct pwrctrl_priv *pwrpriv = &adapt->pwrctrlpriv;
u8 RLBM = 0; /* 0:Min, 1:Max, 2:User define */
- DBG_88E("%s: Mode=%d SmartPS=%d UAPSD=%d\n", __func__,
- Mode, pwrpriv->smart_ps, adapt->registrypriv.uapsd_enable);
-
switch (Mode) {
case PS_MODE_ACTIVE:
H2CSetPwrMode.Mode = 0;
@@ -194,7 +183,6 @@ void rtl8188e_set_FwMediaStatus_cmd(struct adapter *adapt, __le16 mstatus_rpt)
opmode = (u8)mst_rpt;
macid = (u8)(mst_rpt >> 8);
- DBG_88E("### %s: MStatus=%x MACID=%d\n", __func__, opmode, macid);
FillH2CCmd_88E(adapt, H2C_COM_MEDIA_STATUS_RPT, sizeof(mst_rpt), (u8 *)&mst_rpt);
}
@@ -275,10 +263,8 @@ static void ConstructBeacon(struct adapter *adapt, u8 *pframe, u32 *pLength)
_ConstructBeacon:
- if ((pktlen + TXDESC_SIZE) > 512) {
- DBG_88E("beacon frame too large\n");
+ if ((pktlen + TXDESC_SIZE) > 512)
return;
- }
*pLength = pktlen;
}
@@ -440,12 +426,9 @@ static void SetFwRsvdPagePkt(struct adapter *adapt, bool bDLFinished)
struct rsvdpage_loc RsvdPageLoc;
struct wlan_bssid_ex *pnetwork;
- DBG_88E("%s\n", __func__);
ReservedPagePacket = kzalloc(1000, GFP_KERNEL);
- if (!ReservedPagePacket) {
- DBG_88E("%s: alloc ReservedPagePacket fail!\n", __func__);
+ if (!ReservedPagePacket)
return;
- }
pxmitpriv = &adapt->xmitpriv;
pmlmeext = &adapt->mlmeextpriv;
@@ -523,7 +506,6 @@ static void SetFwRsvdPagePkt(struct adapter *adapt, bool bDLFinished)
rtw_hal_mgnt_xmit(adapt, pmgntframe);
- DBG_88E("%s: Set RSVD page location to Fw\n", __func__);
FillH2CCmd_88E(adapt, H2C_COM_RSVD_PAGE, sizeof(RsvdPageLoc), (u8 *)&RsvdPageLoc);
exit:
@@ -540,8 +522,6 @@ void rtl8188e_set_FwJoinBssReport_cmd(struct adapter *adapt, u8 mstatus)
u8 DLBcnCount = 0;
u32 poll = 0;
- DBG_88E("%s mstatus(%x)\n", __func__, mstatus);
-
if (mstatus == 1) {
/* We should set AID, correct TSF, HW seq enable before set JoinBssReport to Fw in 88/92C. */
/* Suggested by filen. Added by tynli. */
@@ -558,10 +538,8 @@ void rtl8188e_set_FwJoinBssReport_cmd(struct adapter *adapt, u8 mstatus)
usb_write8(adapt, REG_BCN_CTRL, usb_read8(adapt, REG_BCN_CTRL) & (~BIT(3)));
usb_write8(adapt, REG_BCN_CTRL, usb_read8(adapt, REG_BCN_CTRL) | BIT(4));
- if (haldata->RegFwHwTxQCtrl & BIT(6)) {
- DBG_88E("HalDownloadRSVDPage(): There is an Adapter is sending beacon.\n");
+ if (haldata->RegFwHwTxQCtrl & BIT(6))
bSendBeacon = true;
- }
/* Set FWHW_TXQ_CTRL 0x422[6]=0 to tell Hw the packet is not a real beacon frame. */
usb_write8(adapt, REG_FWHW_TXQ_CTRL + 2, (haldata->RegFwHwTxQCtrl & (~BIT(6))));
@@ -584,12 +562,6 @@ void rtl8188e_set_FwJoinBssReport_cmd(struct adapter *adapt, u8 mstatus)
} while (!bcn_valid && (poll % 10) != 0 && !adapt->bSurpriseRemoved && !adapt->bDriverStopped);
} while (!bcn_valid && DLBcnCount <= 100 && !adapt->bSurpriseRemoved && !adapt->bDriverStopped);
- if (adapt->bSurpriseRemoved || adapt->bDriverStopped)
- ;
- else if (!bcn_valid)
- DBG_88E("%s: 1 Download RSVD page failed! DLBcnCount:%u, poll:%u\n", __func__, DLBcnCount, poll);
- else
- DBG_88E("%s: 1 Download RSVD success! DLBcnCount:%u, poll:%u\n", __func__, DLBcnCount, poll);
/* */
/* We just can send the reserved page twice during the time that Tx thread is stopped (e.g. pnpsetpower) */
/* because we need to free the Tx BCN Desc which is used by the first reserved page packet. */
@@ -612,10 +584,8 @@ void rtl8188e_set_FwJoinBssReport_cmd(struct adapter *adapt, u8 mstatus)
}
/* Update RSVD page location H2C to Fw. */
- if (bcn_valid) {
+ if (bcn_valid)
rtw_hal_set_hwreg(adapt, HW_VAR_BCN_VALID, NULL);
- DBG_88E("Set RSVD page location to Fw.\n");
- }
/* Do not enable HW DMA BCN or it will cause Pcie interface hang by timing issue. 2011.11.24. by tynli. */
/* Clear CR[8] or beacon packet will not be send to TxBuf anymore. */
--
2.30.2
