Function 'mt7621_pcie_enable_port' is calculating an offset
to write some port related registers. Instead of doing that
just make use of already existent 'pcie_write_port' function
and use virtualy mapped base address with registers. This
increase readability and allow us to remove also two defitions
not used else where.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
---
drivers/staging/mt7621-pci/pci-mt7621.c | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)
diff --git a/drivers/staging/mt7621-pci/pci-mt7621.c b/drivers/staging/mt7621-pci/pci-mt7621.c
index fe9a5bb95d5b..b0b5700cbfec 100644
--- a/drivers/staging/mt7621-pci/pci-mt7621.c
+++ b/drivers/staging/mt7621-pci/pci-mt7621.c
@@ -44,9 +44,6 @@
#define RALINK_PCI_IOBASE 0x002C
/* PCIe RC control registers */
-#define MT7621_PCIE_OFFSET 0x2000
-#define MT7621_NEXT_PORT 0x1000
-
#define RALINK_PCI_ID 0x0030
#define RALINK_PCI_CLASS 0x0034
#define RALINK_PCI_SUBID 0x0038
@@ -491,7 +488,6 @@ static void mt7621_pcie_enable_port(struct mt7621_pcie_port *port)
{
struct mt7621_pcie *pcie = port->pcie;
u32 slot = port->slot;
- u32 offset = MT7621_PCIE_OFFSET + (slot * MT7621_NEXT_PORT);
u32 val;
/* enable pcie interrupt */
@@ -500,12 +496,12 @@ static void mt7621_pcie_enable_port(struct mt7621_pcie_port *port)
pcie_write(pcie, val, RALINK_PCI_PCIMSK_ADDR);
/* map 2G DDR region */
- pcie_write(pcie, PCIE_BAR_MAP_MAX | PCIE_BAR_ENABLE,
- offset + PCI_BASE_ADDRESS_0);
+ pcie_port_write(port, PCIE_BAR_MAP_MAX | PCIE_BAR_ENABLE,
+ PCI_BASE_ADDRESS_0);
/* configure class code and revision ID */
- pcie_write(pcie, PCIE_CLASS_CODE | PCIE_REVISION_ID,
- offset + RALINK_PCI_CLASS);
+ pcie_port_write(port, PCIE_CLASS_CODE | PCIE_REVISION_ID,
+ RALINK_PCI_CLASS);
/* configure RC FTS number to 250 when it leaves L0s */
val = read_config(pcie, slot, PCIE_FTS_NUM);
--
2.25.1
