Re: [PATCH 1/4] dt-bindings: mt7621-pci: PCIe binding documentation for MT7621 SoCs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rob,

On Sat, May 15, 2021 at 2:40 PM Sergio Paracuellos
<sergio.paracuellos@xxxxxxxxx> wrote:
>
> Add device tree binding documentation for PCIe in MT7621 SoCs.
>
> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
> ---
>  .../bindings/pci/mediatek,mt7621-pci.yaml     | 149 ++++++++++++++++++
>  1 file changed, 149 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/mediatek,mt7621-pci.yaml
>
> diff --git a/Documentation/devicetree/bindings/pci/mediatek,mt7621-pci.yaml b/Documentation/devicetree/bindings/pci/mediatek,mt7621-pci.yaml
> new file mode 100644
> index 000000000000..7f5f9d583032
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/mediatek,mt7621-pci.yaml
> @@ -0,0 +1,149 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/mediatek,mt7621-pci.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MediaTek MT7621 PCIe controller
> +
> +maintainers:
> +  - Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
> +
> +description: |+
> +  MediaTek MT7621 PCIe subsys supports single Root complex (RC)
> +  with 3 Root Ports. Each Root Ports supports a Gen1 1-lane Link
> +
> +allOf:
> +  - $ref: /schemas/pci/pci-bus.yaml#
> +
> +properties:
> +  compatible:
> +    const: mediatek,mt7621-pci
> +
> +  reg:
> +    items:
> +      - description: host-pci bridge registers
> +      - description: pcie port 0 RC control registers
> +      - description: pcie port 1 RC control registers
> +      - description: pcie port 2 RC control registers
> +
> +  ranges:
> +    maxItems: 2
> +
> +  resets:
> +    items:
> +      - description: pcie port 0 reset.
> +      - description: pcie port 1 reset.
> +      - description: pcie port 2 reset.
> +
> +  reset-names:
> +    items:
> +      - const: pcie0
> +      - const: pcie1
> +      - const: pcie2
> +
> +  clocks:
> +    items:
> +      - description: pcie port 0 clock.
> +      - description: pcie port 1 clock.
> +      - description: pcie port 2 clock.
> +
> +  clock-names:
> +    items:
> +      - const: pcie0
> +      - const: pcie1
> +      - const: pcie2
> +
> +  phys:
> +    items:
> +      - description: Dual-ported phy for pcie port 0 and 1.
> +      - description: Phy for pcie port 2.
> +
> +  phy-names:
> +    items:
> +      - const: pcie-phy0
> +      - const: pcie-phy2
> +
> +required:
> +  - compatible
> +  - reg
> +  - ranges
> +  - "#interrupt-cells"
> +  - interrupt-map-mask
> +  - interrupt-map
> +  - resets
> +  - reset-names
> +  - clocks
> +  - clock-names
> +  - phys
> +  - phy-names
> +  - reset-gpios
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/interrupt-controller/mips-gic.h>
> +
> +    pcie: pcie@1e140000 {
> +        compatible = "mediatek,mt7621-pci";
> +        reg = <0x1e140000 0x100>,
> +              <0x1e142000 0x100>,
> +              <0x1e143000 0x100>,
> +              <0x1e144000 0x100>;
> +
> +        #address-cells = <3>;
> +        #size-cells = <2>;
> +        pinctrl-names = "default";
> +        pinctrl-0 = <&pcie_pins>;
> +        device_type = "pci";
> +        ranges = <0x02000000 0 0x00000000 0x60000000 0 0x10000000>,  /* pci memory */
> +                 <0x01000000 0 0x00000000 0x1e160000 0 0x00010000>;  /* io space */
> +        #interrupt-cells = <1>;
> +        interrupt-map-mask = <0xF800 0 0 0>;
> +        interrupt-map = <0x0000 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>,
> +                        <0x0800 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>,
> +                        <0x1000 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
> +        resets = <&rstctrl 24>, <&rstctrl 25>, <&rstctrl 26>;
> +        reset-names = "pcie0", "pcie1", "pcie2";
> +        clocks = <&clkctrl 24>, <&clkctrl 25>, <&clkctrl 26>;
> +        clock-names = "pcie0", "pcie1", "pcie2";
> +        phys = <&pcie0_phy 1>, <&pcie2_phy 0>;
> +        phy-names = "pcie-phy0", "pcie-phy2";
> +        reset-gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
> +
> +        pcie@0,0 {
> +            reg = <0x0000 0 0 0 0>;
> +            #address-cells = <3>;
> +            #size-cells = <2>;
> +            device_type = "pci";
> +            #interrupt-cells = <1>;
> +            interrupt-map-mask = <0 0 0 0>;
> +            interrupt-map = <0 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>;
> +            ranges;
> +        };
> +
> +        pcie@1,0 {
> +            reg = <0x0800 0 0 0 0>;
> +            #address-cells = <3>;
> +            #size-cells = <2>;
> +            device_type = "pci";
> +            #interrupt-cells = <1>;
> +            interrupt-map-mask = <0 0 0 0>;
> +            interrupt-map = <0 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>;
> +            ranges;
> +        };
> +
> +        pcie@2,0 {
> +            reg = <0x1000 0 0 0 0>;
> +            #address-cells = <3>;
> +            #size-cells = <2>;
> +            device_type = "pci";
> +            #interrupt-cells = <1>;
> +            interrupt-map-mask = <0 0 0 0>;
> +            interrupt-map = <0 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
> +            ranges;
> +        };
> +    };
> +...
> --
> 2.25.1
>

Any comments on this binding? It's been a while in devicetree
patchwork review list without comments.

Thanks in advance for your time.

Best regards,
     Sergio Paracuellos




[Index of Archives]     [Linux Driver Development]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux