Re: [PATCH 04/10] media: hantro: add support for Rockchip RK3066

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 2021-05-27 at 01:22 +0200, Alex Bee wrote:
> Hi Ezequiel,
> 
> thanks for your feedback.
> 
> Am 26.05.21 um 12:32 schrieb Ezequiel Garcia:
> > Hi Alex,
> > 
> > Thanks for the patch.
> > 
> > On Tue, 2021-05-25 at 17:22 +0200, Alex Bee wrote:
> > > RK3066's VPU IP block is the predecessor from what RK3288 has.
> > > The hardware differences are:
> > >    - supports decoding frame sizes up to 1920x1088 only
> > >    - doesn't have the 'G1_REG_SOFT_RESET' register
> > >      (requires another .reset callback for hantro_codec_ops,
> > >       since writing this register will result in non-working
> > >       IP block)
> > >    - has one ACLK/HCLK per vdpu/vepu
> > >    - ACLKs can be clocked up to 300 MHz only
> > >    - no MMU
> > >      (no changes required: CMA will be transparently used)
> > > 
> > > Add a new RK3066 variant which reflect this differences. This variant
> > > can be used for RK3188 as well.
> > > 
> > > Signed-off-by: Alex Bee <knaerzche@xxxxxxxxx>
> > > ---
> > >   drivers/staging/media/hantro/hantro_drv.c    |   1 +
> > >   drivers/staging/media/hantro/hantro_hw.h     |   1 +
> > >   drivers/staging/media/hantro/rk3288_vpu_hw.c | 116 +++++++++++++++++++
> > >   3 files changed, 118 insertions(+)
> > > 
> > > diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c
> > > index 2f6b01c7a6a0..38ea7b24036e 100644
> > > --- a/drivers/staging/media/hantro/hantro_drv.c
> > > +++ b/drivers/staging/media/hantro/hantro_drv.c
> > > @@ -489,6 +489,7 @@ static const struct of_device_id of_hantro_match[] = {
> > >          { .compatible = "rockchip,rk3399-vpu", .data = &rk3399_vpu_variant, },
> > >          { .compatible = "rockchip,rk3328-vpu", .data = &rk3328_vpu_variant, },
> > >          { .compatible = "rockchip,rk3288-vpu", .data = &rk3288_vpu_variant, },
> > > +       { .compatible = "rockchip,rk3066-vpu", .data = &rk3066_vpu_variant, },
> > >   #endif
> > >   #ifdef CONFIG_VIDEO_HANTRO_IMX8M
> > >          { .compatible = "nxp,imx8mq-vpu", .data = &imx8mq_vpu_variant, },
> > > diff --git a/drivers/staging/media/hantro/hantro_hw.h b/drivers/staging/media/hantro/hantro_hw.h
> > > index 3d8b53567f16..de2bc367a15a 100644
> > > --- a/drivers/staging/media/hantro/hantro_hw.h
> > > +++ b/drivers/staging/media/hantro/hantro_hw.h
> > > @@ -163,6 +163,7 @@ enum hantro_enc_fmt {
> > >   extern const struct hantro_variant rk3399_vpu_variant;
> > >   extern const struct hantro_variant rk3328_vpu_variant;
> > >   extern const struct hantro_variant rk3288_vpu_variant;
> > > +extern const struct hantro_variant rk3066_vpu_variant;
> > >   extern const struct hantro_variant imx8mq_vpu_variant;
> > >   extern const struct hantro_variant sama5d4_vdec_variant;
> > >   
> > > diff --git a/drivers/staging/media/hantro/rk3288_vpu_hw.c b/drivers/staging/media/hantro/rk3288_vpu_hw.c
> > > index fefd45269e52..29805c4bd92f 100644
> > > --- a/drivers/staging/media/hantro/rk3288_vpu_hw.c
> > > +++ b/drivers/staging/media/hantro/rk3288_vpu_hw.c
> > > @@ -10,8 +10,10 @@
> > >   
> > >   #include "hantro.h"
> > >   #include "hantro_jpeg.h"
> > > +#include "hantro_g1_regs.h"
> > >   #include "hantro_h1_regs.h"
> > >   
> > > +#define RK3066_ACLK_MAX_FREQ (300 * 1000 * 1000)
> > >   #define RK3288_ACLK_MAX_FREQ (400 * 1000 * 1000)
> > >   
> > >   /*
> > > @@ -62,6 +64,52 @@ static const struct hantro_fmt rk3288_vpu_postproc_fmts[] = {
> > >          },
> > >   };
> > >   
> > > +static const struct hantro_fmt rk3066_vpu_dec_fmts[] = {
> > > +       {
> > > +               .fourcc = V4L2_PIX_FMT_NV12,
> > > +               .codec_mode = HANTRO_MODE_NONE,
> > > +       },
> > > +       {
> > > +               .fourcc = V4L2_PIX_FMT_H264_SLICE,
> > > +               .codec_mode = HANTRO_MODE_H264_DEC,
> > > +               .max_depth = 2,
> > > +               .frmsize = {
> > > +                       .min_width = 48,
> > > +                       .max_width = 1920,
> > > +                       .step_width = MB_DIM,
> > > +                       .min_height = 48,
> > > +                       .max_height = 1088,
> > > +                       .step_height = MB_DIM,
> > > +               },
> > > +       },
> > > +       {
> > > +               .fourcc = V4L2_PIX_FMT_MPEG2_SLICE,
> > > +               .codec_mode = HANTRO_MODE_MPEG2_DEC,
> > > +               .max_depth = 2,
> > > +               .frmsize = {
> > > +                       .min_width = 48,
> > > +                       .max_width = 1920,
> > > +                       .step_width = MB_DIM,
> > > +                       .min_height = 48,
> > > +                       .max_height = 1088,
> > > +                       .step_height = MB_DIM,
> > > +               },
> > > +       },
> > > +       {
> > > +               .fourcc = V4L2_PIX_FMT_VP8_FRAME,
> > > +               .codec_mode = HANTRO_MODE_VP8_DEC,
> > > +               .max_depth = 2,
> > > +               .frmsize = {
> > > +                       .min_width = 48,
> > > +                       .max_width = 1920,
> > > +                       .step_width = MB_DIM,
> > > +                       .min_height = 48,
> > > +                       .max_height = 1088,
> > > +                       .step_height = MB_DIM,
> > > +               },
> > > +       },
> > > +};
> > > +
> > >   static const struct hantro_fmt rk3288_vpu_dec_fmts[] = {
> > >          {
> > >                  .fourcc = V4L2_PIX_FMT_NV12,
> > > @@ -126,6 +174,14 @@ static irqreturn_t rk3288_vepu_irq(int irq, void *dev_id)
> > >          return IRQ_HANDLED;
> > >   }
> > >   
> > > +static int rk3066_vpu_hw_init(struct hantro_dev *vpu)
> > > +{
> > > +       /* Bump ACLKs to max. possible freq. to improve performance. */
> > > +       clk_set_rate(vpu->clocks[0].clk, RK3066_ACLK_MAX_FREQ);
> > > +       clk_set_rate(vpu->clocks[0].clk, RK3066_ACLK_MAX_FREQ);
> > > +       return 0;
> > > +}
> > > +
> > >   static int rk3288_vpu_hw_init(struct hantro_dev *vpu)
> > >   {
> > >          /* Bump ACLK to max. possible freq. to improve performance. */
> > > @@ -133,6 +189,14 @@ static int rk3288_vpu_hw_init(struct hantro_dev *vpu)
> > >          return 0;
> > >   }
> > >   
> > > +static void rk3066_vpu_dec_reset(struct hantro_ctx *ctx)
> > > +{
> > > +       struct hantro_dev *vpu = ctx->dev;
> > > +
> > > +       vdpu_write(vpu, G1_REG_INTERRUPT_DEC_IRQ_DIS, G1_REG_INTERRUPT);
> > > +       vdpu_write(vpu, G1_REG_CONFIG_DEC_CLK_GATE_E, G1_REG_CONFIG);
> > > +}
> > > +
> > >   static void rk3288_vpu_enc_reset(struct hantro_ctx *ctx)
> > >   {
> > >          struct hantro_dev *vpu = ctx->dev;
> > > @@ -145,6 +209,33 @@ static void rk3288_vpu_enc_reset(struct hantro_ctx *ctx)
> > >   /*
> > >    * Supported codec ops.
> > >    */
> > > +static const struct hantro_codec_ops rk3066_vpu_codec_ops[] = {
> > > +       [HANTRO_MODE_JPEG_ENC] = {
> > > +               .run = hantro_h1_jpeg_enc_run,
> > > +               .reset = rk3288_vpu_enc_reset,
> > > +               .init = hantro_jpeg_enc_init,
> > > +               .done = hantro_jpeg_enc_done,
> > > +               .exit = hantro_jpeg_enc_exit,
> > > +       },
> > > +       [HANTRO_MODE_H264_DEC] = {
> > > +               .run = hantro_g1_h264_dec_run,
> > > +               .reset = rk3066_vpu_dec_reset,
> > > +               .init = hantro_h264_dec_init,
> > > +               .exit = hantro_h264_dec_exit,
> > > +       },
> > > +       [HANTRO_MODE_MPEG2_DEC] = {
> > > +               .run = hantro_g1_mpeg2_dec_run,
> > > +               .reset = rk3066_vpu_dec_reset,
> > > +               .init = hantro_mpeg2_dec_init,
> > > +               .exit = hantro_mpeg2_dec_exit,
> > > +       },
> > > +       [HANTRO_MODE_VP8_DEC] = {
> > > +               .run = hantro_g1_vp8_dec_run,
> > > +               .reset = rk3066_vpu_dec_reset,
> > > +               .init = hantro_vp8_dec_init,
> > > +               .exit = hantro_vp8_dec_exit,
> > > +       },
> > > +};
> > >   
> > >   static const struct hantro_codec_ops rk3288_vpu_codec_ops[] = {
> > >          [HANTRO_MODE_JPEG_ENC] = {
> > > @@ -183,10 +274,35 @@ static const struct hantro_irq rk3288_irqs[] = {
> > >          { "vdpu", hantro_g1_irq },
> > >   };
> > >   
> > > +static const char * const rk3066_clk_names[] = {
> > > +       "aclk_vdpu", "hclk_vdpu",
> > > +       "aclk_vepu", "hclk_vepu"
> > > +};
> > > +
> > >   static const char * const rk3288_clk_names[] = {
> > >          "aclk", "hclk"
> > >   };
> > >   
> > > +const struct hantro_variant rk3066_vpu_variant = {
> > > +       .enc_offset = 0x0,
> > > +       .enc_fmts = rk3288_vpu_enc_fmts,
> > > +       .num_enc_fmts = ARRAY_SIZE(rk3288_vpu_enc_fmts),
> > > +       .dec_offset = 0x400,
> > Having decoder and encoder supported by a single devicetree
> > node was done for RK3288 to cope with some bug in the hardware
> > that was effectively linking the decoder and the encoder.
> > 
> > AFAIK, Rockchip has fixed this, so unless there's a strong
> > need, I prefer we keep them separated, with one DT node
> > for the g1 decoder and one for the h1 encoder.
> > 
> > Thanks!
> > Ezequiel
> > 
> I just checked it: despite it looks like we could use the decoder and 
> encoder separately
> 
> (separate clocks for decoder / encoder) the VPU block won't work (SoC 
> crashes),
> 
> if not all 4 clocks are enabled for neither decoding nor encoding.
> 
> I'd prefer the other way also, but it seems not possible.
> 

That's really useful, so it seems it's safer to represent this
in a single node, given there's at least some degree of sharing
going on, which the VPU Combo naming suggests anyways :)

Could you add a comment in the code about this clock requirement?

Also, does it make sense to merge rk3288_vpu_hw.c and rk3399_vpu_hw.c
as just rockchip_vpu_hw.c?

Thanks!
Ezequiel





[Index of Archives]     [Linux Driver Development]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux