Re: [Outreachy kernel] [PATCH 1/2] staging: rtl8723bs: hal: Remove set but unused variables

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Apr 29, 2021 at 11:16:24AM +0200, Fabio M. De Francesco wrote:
> On Thursday, April 29, 2021 10:25:53 AM CEST Fabio Aiuto wrote:
> > On Thu, Apr 29, 2021 at 09:44:47AM +0200, Fabio M. De Francesco wrote:
> > > On Thursday, April 29, 2021 9:26:20 AM CEST Fabio Aiuto wrote:
> > > > Hi Fabio,
> > > > 
> > > > On Wed, Apr 28, 2021 at 01:33:45PM +0200, Fabio M. De Francesco wrote:
> > > > > Removed four set but unused variables. Issue detected by gcc.
> > > > > 
> > > > > Signed-off-by: Fabio M. De Francesco <fmdefrancesco@xxxxxxxxx>
> > > > > ---
> > > > > 
> > > > >  drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c | 5 -----
> > > > >  1 file changed, 5 deletions(-)
> > > > > 
> > > > > diff --git a/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
> > > > > b/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c index
> > > 
> > > 082448557b53..96cb4426a0f4
> > > 
> > > > > 100644
> > > > > --- a/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
> > > > > +++ b/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
> > > > > @@ -3900,14 +3900,11 @@ u8 GetHalDefVar8723B(struct adapter *padapter,
> > > 
> > > enum
> > > 
> > > > > hal_def_variable variable, v>
> > > > > 
> > > > >  			u32 cmd;
> > > > >  			u32 ra_info1, ra_info2;
> > > > >  			u32 rate_mask1, rate_mask2;
> > > > > 
> > > > > -			u8 curr_tx_rate, curr_tx_sgi, hight_rate,
> > > 
> > > lowest_rate;
> > > 
> > > > >  			cmd = 0x40000100 | mac_id;
> > > > >  			rtw_write32(padapter,
> > > 
> > > REG_HMEBOX_DBG_2_8723B, cmd);
> > > 
> > > > >  			msleep(10);
> > > > >  			ra_info1 = rtw_read32(padapter, 0x2F0);
> > > > > 
> > > > > -			curr_tx_rate = ra_info1&0x7F;
> > > > > -			curr_tx_sgi = (ra_info1>>7)&0x01;
> > > > > 
> > > > >  			cmd = 0x40000400 | mac_id;
> > > > >  			rtw_write32(padapter,
> > > 
> > > REG_HMEBOX_DBG_2_8723B, cmd);
> > > 
> > > > > @@ -3916,8 +3913,6 @@ u8 GetHalDefVar8723B(struct adapter *padapter, 
> enum
> > > > > hal_def_variable variable, v>
> > > > > 
> > > > >  			ra_info2 = rtw_read32(padapter, 0x2F4);
> > > > >  			rate_mask1 = rtw_read32(padapter, 0x2F8);
> > > > >  			rate_mask2 = rtw_read32(padapter, 0x2FC);
> > > > > 
> > > > > -			hight_rate = ra_info2&0xFF;
> > > > > -			lowest_rate = (ra_info2>>8)  & 0xFF;
> > > > > 
> > > > >  		}
> > > > >  		break;
> > > > 
> > > > rate_mask{1,2} and ra_info{1,2} seems to be unused as well.
> > > > 
> > > > thank you,
> > > > 
> > > > fabio
> > > 
> > > Hello Fabio,
> > > 
> > > I'm not sure about it: rtw_read32 calls a pointer to a function. I'm don't
> > > know drivers programming, however that function looks like an 
> implementation
> > > of a read() system call. So I wouldn't be so sure to remove those calls.
> > > 
> > > Could calling a (*read) method have side effects on subsequent read()? I 
> mean:
> > > could it update some internal data structure? If not I can remove the
> > > variables you mentioned above and the calls to read32.
> > > 
> > > I'm looking forward to read your reply.
> > > 
> > > Thanks,
> > > 
> > > Fabio
> > 
> > hi Fabio,
> > 
> > rtw_read32 is a macro wrapping _rtw_read32() defined as follows (in core/
> rtw_io.c):
> >
> Hi Fabio,
> 
> Thanks a lot for your reply.
> 
> However, There is something less than clear to me... how did you find that 
> rtw_read32 is a macro wrapping _rtw_read32()? I mean: I knew that, in vim, one 
> can go to the definition of something by using ctrl-] key.
> 
> If I do that on rtw_read32 it takes me to a static definition of it in 
> drivers/net/wireless/realtek/rtw88/hci.h. This is a one line function:
> 
> static inline void rtw_write32(struct rtw_dev *rtwdev, u32 addr, u32 val)
> {       
>         rtwdev->hci.ops->write32(rtwdev, addr, val);
> }
> 
> When I use ctrl-] on write32() it takes me to struct rtw_hci_ops in drivers/
> net/wireless/realtek/rtw88/hci.h.
> 
> After that I wanted to find where the member (*read32)() is assigned but I 
> don't know where and how to grep it: I tried "grep -rn "\bwrite32\b=" drivers/
> staging/rtl8723bs/" but I found nothing...
> 
> Can you please explain what I'm doing wrong in following the path I mentioned 
> above and how you find out that macro?

$grep -r 'define\s*\brtw_read32' drivers/staging/rtl8723bs/

it's a grep I always do to check if a function is actally
a function or a macro..


> 
> Thanks for your time,
> 
> Fabio 
> > 
> > u32 _rtw_read32(struct adapter *adapter, u32 addr)
> > {
> >         u32 r_val;
> >         /* struct       io_queue        *pio_queue = (struct io_queue
> > *)adapter->pio_queue; */ struct io_priv *pio_priv = &adapter->iopriv;
> >         struct  intf_hdl                *pintfhdl = &(pio_priv->intf);
> >         u32 (*_read32)(struct intf_hdl *pintfhdl, u32 addr);
> > 
> >         _read32 = pintfhdl->io_ops._read32;
> > 
> >         r_val = _read32(pintfhdl, addr);
> >         return rtw_le32_to_cpu(r_val);
> > 
> > }
> > 
> > the actual read seems to be performed by the handler contained in
> > 
> > 	pintfhdl->io_ops._read32;
> > 
> > so:
> > 
> > $ grep -r '\b_read32' drivers/staging/rtl8723bs/
> > 
> > drivers/staging/rtl8723bs/hal/sdio_ops.c:	ops->_read32 = 
> &sdio_read32;
> > 
> > this is the place where _read32 is stored with sdio_read32 reference...
> > 
> > drivers/staging/rtl8723bs/core/rtw_io.c:	u32 (*_read32)(struct 
> intf_hdl *pintfhdl, u32
> > addr); drivers/staging/rtl8723bs/core/rtw_io.c:	_read32 = pintfhdl-
> >io_ops._read32;
> > ...
> > 
> > if you check it in hal/sdio_ops.c, nothing is written, just reads are
> > performed (and it's not odd, for a read function isn't supposed to write
> > something under the hood ;)).
> > 
> > I think those variables could be easily removed as W=1 gcc suggests.
> > 
> > thank you,
> > 
> > fabio
> 
> 
> 
> 

thanks,

fabio




[Index of Archives]     [Linux Driver Development]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux