[PATCH RESEND v3 4/6] staging: media: atomisp: reformat code comment blocks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Reformat code comment blocks according to the coding style guidelines.
This resolves different checkpatch script WARNINGs around block comments.

Suggested-by: Fabio Aiuto <fabioaiuto83@xxxxxxxxx>
Signed-off-by: Deepak R Varma <drv@xxxxxxxxx>
---

Changes since v2:
   - Tag Fabio Auito for the patch suggestion

Changes in v1:
   - implement following changes suggested by Fabio Aiuto
       a. Corrected commenting style
       b. Similar style implemented for other comment blocks in
          the same files.


 .../media/atomisp/i2c/atomisp-gc2235.c        | 19 ++++----
 .../atomisp/i2c/atomisp-libmsrlisthelper.c    |  6 ++-
 .../media/atomisp/i2c/atomisp-mt9m114.c       | 46 +++++++++++--------
 .../media/atomisp/i2c/atomisp-ov2680.c        | 20 +++++---
 4 files changed, 56 insertions(+), 35 deletions(-)

diff --git a/drivers/staging/media/atomisp/i2c/atomisp-gc2235.c b/drivers/staging/media/atomisp/i2c/atomisp-gc2235.c
index 548c572d3b57..6ee6e8414f0e 100644
--- a/drivers/staging/media/atomisp/i2c/atomisp-gc2235.c
+++ b/drivers/staging/media/atomisp/i2c/atomisp-gc2235.c
@@ -228,7 +228,7 @@ static int gc2235_g_focal(struct v4l2_subdev *sd, s32 *val)
 
 static int gc2235_g_fnumber(struct v4l2_subdev *sd, s32 *val)
 {
-	/*const f number for imx*/
+	/* const f number for imx */
 	*val = (GC2235_F_NUMBER_DEFAULT_NUM << 16) | GC2235_F_NUMBER_DEM;
 	return 0;
 }
@@ -427,7 +427,8 @@ static long gc2235_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
 	return 0;
 }
 
-/* This returns the exposure time being used. This should only be used
+/*
+ * This returns the exposure time being used. This should only be used
  * for filling in EXIF data, not for actual image processing.
  */
 static int gc2235_q_exposure(struct v4l2_subdev *sd, s32 *value)
@@ -746,11 +747,12 @@ static int startup(struct v4l2_subdev *sd)
 	int ret = 0;
 
 	if (is_init == 0) {
-		/* force gc2235 to do a reset in res change, otherwise it
-		* can not output normal after switching res. and it is not
-		* necessary for first time run up after power on, for the sack
-		* of performance
-		*/
+		/*
+		 * force gc2235 to do a reset in res change, otherwise it
+		 * can not output normal after switching res. and it is not
+		 * necessary for first time run up after power on, for the sack
+		 * of performance
+		 */
 		power_down(sd);
 		power_up(sd);
 		gc2235_write_reg_array(client, gc2235_init_settings);
@@ -904,7 +906,8 @@ static int gc2235_s_config(struct v4l2_subdev *sd,
 	    (struct camera_sensor_platform_data *)platform_data;
 
 	mutex_lock(&dev->input_lock);
-	/* power off the module, then power on it in future
+	/*
+	 * power off the module, then power on it in future
 	 * as first power on by board may not fulfill the
 	 * power on sequqence needed by the module
 	 */
diff --git a/drivers/staging/media/atomisp/i2c/atomisp-libmsrlisthelper.c b/drivers/staging/media/atomisp/i2c/atomisp-libmsrlisthelper.c
index b93c80471f22..7a20d918a9d5 100644
--- a/drivers/staging/media/atomisp/i2c/atomisp-libmsrlisthelper.c
+++ b/drivers/staging/media/atomisp/i2c/atomisp-libmsrlisthelper.c
@@ -50,14 +50,16 @@ struct tbd_data_record_header {
 static int set_msr_configuration(struct i2c_client *client, uint8_t *bufptr,
 				 unsigned int size)
 {
-	/* The configuration data contains any number of sequences where
+	/*
+	 * The configuration data contains any number of sequences where
 	 * the first byte (that is, uint8_t) that marks the number of bytes
 	 * in the sequence to follow, is indeed followed by the indicated
 	 * number of bytes of actual data to be written to sensor.
 	 * By convention, the first two bytes of actual data should be
 	 * understood as an address in the sensor address space (hibyte
 	 * followed by lobyte) where the remaining data in the sequence
-	 * will be written. */
+	 * will be written.
+	 */
 
 	u8 *ptr = bufptr;
 
diff --git a/drivers/staging/media/atomisp/i2c/atomisp-mt9m114.c b/drivers/staging/media/atomisp/i2c/atomisp-mt9m114.c
index 465fc4468442..f314e5fed9cb 100644
--- a/drivers/staging/media/atomisp/i2c/atomisp-mt9m114.c
+++ b/drivers/staging/media/atomisp/i2c/atomisp-mt9m114.c
@@ -475,10 +475,12 @@ static int gpio_ctrl(struct v4l2_subdev *sd, bool flag)
 	if (!dev || !dev->platform_data)
 		return -ENODEV;
 
-	/* Note: current modules wire only one GPIO signal (RESET#),
+	/*
+	 * Note: current modules wire only one GPIO signal (RESET#),
 	 * but the schematic wires up two to the connector.  BIOS
 	 * versions have been unfortunately inconsistent with which
-	 * ACPI index RESET# is on, so hit both */
+	 * ACPI index RESET# is on, so hit both
+	 */
 
 	if (flag) {
 		ret = dev->platform_data->gpio0_ctrl(sd, 0);
@@ -560,7 +562,7 @@ static int power_down(struct v4l2_subdev *sd)
 	if (ret)
 		dev_err(&client->dev, "vprog failed.\n");
 
-	/*according to DS, 20ms is needed after power down*/
+	/* according to DS, 20ms is needed after power down */
 	msleep(20);
 
 	return ret;
@@ -947,7 +949,7 @@ static int mt9m114_g_focal(struct v4l2_subdev *sd, s32 *val)
 
 static int mt9m114_g_fnumber(struct v4l2_subdev *sd, s32 *val)
 {
-	/*const f number for mt9m114*/
+	/* const f number for mt9m114 */
 	*val = (MT9M114_F_NUMBER_DEFAULT_NUM << 16) | MT9M114_F_NUMBER_DEM;
 	return 0;
 }
@@ -1014,13 +1016,13 @@ static long mt9m114_s_exposure(struct v4l2_subdev *sd,
 	AnalogGain = exposure->gain[0];
 	DigitalGain = exposure->gain[1];
 	if (!dev->streamon) {
-		/*Save the first exposure values while stream is off*/
+		/* Save the first exposure values while stream is off */
 		dev->first_exp = coarse_integration;
 		dev->first_gain = AnalogGain;
 		dev->first_diggain = DigitalGain;
 	}
-	/* DigitalGain = 0x400 * (((u16) DigitalGain) >> 8) +
-	((unsigned int)(0x400 * (((u16) DigitalGain) & 0xFF)) >>8); */
+	/* DigitalGain = 0x400 * (((u16) DigitalGain) >> 8) +		*/
+	/* ((unsigned int)(0x400 * (((u16) DigitalGain) & 0xFF)) >>8);	*/
 
 	/* set frame length */
 	if (FLines < coarse_integration + 6)
@@ -1034,8 +1036,10 @@ static long mt9m114_s_exposure(struct v4l2_subdev *sd,
 	}
 
 	/* set coarse integration */
-	/* 3A provide real exposure time.
-		should not translate to any value here. */
+	/*
+	 * 3A provide real exposure time.
+	 * should not translate to any value here.
+	 */
 	ret = mt9m114_write_reg(client, MISENSOR_16BIT,
 				REG_EXPO_COARSE, (u16)(coarse_integration));
 	if (ret) {
@@ -1044,7 +1048,7 @@ static long mt9m114_s_exposure(struct v4l2_subdev *sd,
 	}
 
 	/*
-	// set analog/digital gain
+	 * set analog/digital gain
 	switch(AnalogGain)
 	{
 	case 0:
@@ -1069,8 +1073,10 @@ static long mt9m114_s_exposure(struct v4l2_subdev *sd,
 	*/
 	if (DigitalGain >= 16 || DigitalGain <= 1)
 		DigitalGain = 1;
-	/* AnalogGainToWrite =
-		(u16)((DigitalGain << 12) | AnalogGainToWrite); */
+
+	/*
+	 * AnalogGainToWrite = (u16)((DigitalGain << 12) | AnalogGainToWrite);
+	 */
 	AnalogGainToWrite = (u16)((DigitalGain << 12) | (u16)AnalogGain);
 	ret = mt9m114_write_reg(client, MISENSOR_16BIT,
 				REG_GAIN, AnalogGainToWrite);
@@ -1095,8 +1101,10 @@ static long mt9m114_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
 	return 0;
 }
 
-/* This returns the exposure time being used. This should only be used
-   for filling in EXIF data, not for actual image processing. */
+/*
+ * This returns the exposure time being used. This should only be used
+ * for filling in EXIF data, not for actual image processing.
+ */
 static int mt9m114_g_exposure(struct v4l2_subdev *sd, s32 *value)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
@@ -1247,7 +1255,8 @@ static int mt9m114_s_ev(struct v4l2_subdev *sd, s32 val)
 	s32 luma = 0x37;
 	int err;
 
-	/* EV value only support -2 to 2
+	/*
+	 * EV value only support -2 to 2
 	 * 0: 0x37, 1:0x47, 2:0x57, -1:0x27, -2:0x17
 	 */
 	if (val < -2 || val > 2)
@@ -1295,9 +1304,10 @@ static int mt9m114_g_ev(struct v4l2_subdev *sd, s32 *val)
 	return 0;
 }
 
-/* Fake interface
+/*
+ * Fake interface
  * mt9m114 now can not support 3a_lock
-*/
+ */
 static int mt9m114_s_3a_lock(struct v4l2_subdev *sd, s32 val)
 {
 	aaalock = val;
@@ -1843,7 +1853,7 @@ static int mt9m114_probe(struct i2c_client *client)
 		return ret;
 	}
 
-	/*TODO add format code here*/
+	/* TODO add format code here */
 	dev->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
 	dev->pad.flags = MEDIA_PAD_FL_SOURCE;
 	dev->format.code = MEDIA_BUS_FMT_SGRBG10_1X10;
diff --git a/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c b/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c
index c17615149f46..4571f4328b80 100644
--- a/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c
+++ b/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c
@@ -127,7 +127,7 @@ static int ov2680_g_focal(struct v4l2_subdev *sd, s32 *val)
 
 static int ov2680_g_fnumber(struct v4l2_subdev *sd, s32 *val)
 {
-	/*const f number for ov2680*/
+	/* const f number for ov2680 */
 
 	*val = (OV2680_F_NUMBER_DEFAULT_NUM << 16) | OV2680_F_NUMBER_DEM;
 	return 0;
@@ -399,7 +399,8 @@ static long ov2680_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
 	return 0;
 }
 
-/* This returns the exposure time being used. This should only be used
+/*
+ * This returns the exposure time being used. This should only be used
  * for filling in EXIF data, not for actual image processing.
  */
 static int ov2680_q_exposure(struct v4l2_subdev *sd, s32 *value)
@@ -728,11 +729,13 @@ static int gpio_ctrl(struct v4l2_subdev *sd, bool flag)
 	if (!dev || !dev->platform_data)
 		return -ENODEV;
 
-	/* The OV2680 documents only one GPIO input (#XSHUTDN), but
+	/*
+	 * The OV2680 documents only one GPIO input (#XSHUTDN), but
 	 * existing integrations often wire two (reset/power_down)
 	 * because that is the way other sensors work.  There is no
 	 * way to tell how it is wired internally, so existing
-	 * firmwares expose both and we drive them symmetrically. */
+	 * firmwares expose both and we drive them symmetrically.
+	 */
 	if (flag) {
 		ret = dev->platform_data->gpio0_ctrl(sd, 1);
 		usleep_range(10000, 15000);
@@ -978,7 +981,8 @@ static int ov2680_set_fmt(struct v4l2_subdev *sd,
 		goto err;
 	}
 
-	/*recall flip functions to avoid flip registers
+	/*
+	 * recall flip functions to avoid flip registers
 	 * were overridden by default setting
 	 */
 	if (h_flag)
@@ -988,7 +992,8 @@ static int ov2680_set_fmt(struct v4l2_subdev *sd,
 
 	v4l2_info(client, "\n%s idx %d\n", __func__, dev->fmt_idx);
 
-	/*ret = startup(sd);
+	/*
+	 * ret = startup(sd);
 	 * if (ret)
 	 * dev_err(&client->dev, "ov2680 startup err\n");
 	 */
@@ -1097,7 +1102,8 @@ static int ov2680_s_config(struct v4l2_subdev *sd,
 	    (struct camera_sensor_platform_data *)platform_data;
 
 	mutex_lock(&dev->input_lock);
-	/* power off the module, then power on it in future
+	/*
+	 * power off the module, then power on it in future
 	 * as first power on by board may not fulfill the
 	 * power on sequqence needed by the module
 	 */
-- 
2.25.1







[Index of Archives]     [Linux Driver Development]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux