Re: [PATCH v2 1/2] dt-bindings: staging: iio: cdc: ad7746: add binding documentation for AD7746

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 4/22/21 9:16 PM, Lucas Stankus wrote:
On Tue, Apr 20, 2021 at 4:37 PM Rob Herring <robh@xxxxxxxxxx> wrote:
On Sun, Apr 18, 2021 at 07:49:51PM -0300, Lucas Stankus wrote:
Add device tree binding documentation for AD7746 cdc in YAML format.

Signed-off-by: Lucas Stankus <lucas.p.stankus@xxxxxxxxx>
---

A minor note about the adi,excitation-vdd-permille property. Jonathan
suggested the name to be adi,excitation-vdd-milicent, but I was unsure of
the milicent naming. With a quick search I found out that the common way to
call a thousandth is 'per mille'[1], but I didn't find any use of it in the
kernel documentation. Any thoughts about it?
Seems okay to me.

[1] https://en.wikipedia.org/wiki/Per_mille

  .../bindings/iio/cdc/adi,ad7746.yaml          | 73 +++++++++++++++++++
  1 file changed, 73 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/iio/cdc/adi,ad7746.yaml

diff --git a/Documentation/devicetree/bindings/iio/cdc/adi,ad7746.yaml b/Documentation/devicetree/bindings/iio/cdc/adi,ad7746.yaml
new file mode 100644
index 000000000000..a2a7eee674ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/cdc/adi,ad7746.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/cdc/adi,ad7746.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AD7746 24-Bit Capacitance-to-Digital Converter with Temperature Sensor
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@xxxxxxxxxx>
+
+description: |
+  AD7746 24-Bit Capacitance-to-Digital Converter with Temperature Sensor
+
+  Specifications about the part can be found at:
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7291.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7745
+      - adi,ad7746
+      - adi,ad7747
+
+  reg:
+    maxItems: 1
+
+  adi,excitation-vdd-permille:
+    description: |
+      Set VDD per mille to be used as the excitation voltage.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [125, 250, 375, 500]
+
+  adi,exca-output-en:
+    description: Enables the EXCA pin as the excitation output.
+    type: boolean
+
+  adi,exca-output-invert:
+    description: Inverts the excitation output in the EXCA pin.
+    type: boolean
'invert' assumes I know what the non-inverted signal is. Sometimes that
makes sense, but if you can define in terms of the inverse that would be
better. For example, for a normally active low signal, name the property
'foo-active-high'.
Thanks for the feedback!
 From reading the data sheet I couldn't quite grasp what would be an inverted
excitation output, but I don't have a lot of experience with CDCs. Maybe someone
with more experience could help out with a better suggestion.
This is the only thing I could find 
https://www.analog.com/media/en/technical-documentation/application-notes/AN-1585.pdf.
The datasheet also says that only at most one of them should be 
inverted. So maybe only a single property which selects which of the two 
is inverted.





[Index of Archives]     [Linux Driver Development]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux