Re: [PATCH v2 4/5] staging: rtl8192e: rectified spelling mistake and replace memcmp with ether_oui_equal

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Apr 14, 2021 at 10:16:59AM +0200, Greg KH wrote:
> On Wed, Apr 14, 2021 at 12:26:01PM +0530, Mitali Borkar wrote:
> > Added a generic function of static inline bool in
> > include/linux/etherdevice.h to replace memcmp with
> > ether_oui_equal throughout the execution.
> > Corrected the misspelled words in this file.
> > 
> > Signed-off-by: Mitali Borkar <mitaliborkar810@xxxxxxxxx>
> > ---
> >  
> > Changes from v1:- Rectified spelling mistake and replaced memcmp with
> > ether_oui_equal.
> > 
> >  drivers/staging/rtl8192e/rtl819x_HTProc.c | 48 +++++++++++------------
> >  include/linux/etherdevice.h               |  5 +++
> >  2 files changed, 29 insertions(+), 24 deletions(-)
> > 
> > diff --git a/drivers/staging/rtl8192e/rtl819x_HTProc.c b/drivers/staging/rtl8192e/rtl819x_HTProc.c
> > index ec6b46166e84..ce58feb2af9a 100644
> > --- a/drivers/staging/rtl8192e/rtl819x_HTProc.c
> > +++ b/drivers/staging/rtl8192e/rtl819x_HTProc.c
> > @@ -43,7 +43,7 @@ u16 MCS_DATA_RATE[2][2][77] = {
> >  	 810, 720, 810, 900, 900, 990} }
> >  };
> >  
> > -static u8 UNKNOWN_BORADCOM[3] = {0x00, 0x14, 0xbf};
> > +static u8 UNKNOWN_BROADCOM[3] = {0x00, 0x14, 0xbf};
> >  
> >  static u8 LINKSYSWRT330_LINKSYSWRT300_BROADCOM[3] = {0x00, 0x1a, 0x70};
> >  
> > @@ -146,16 +146,16 @@ bool IsHTHalfNmodeAPs(struct rtllib_device *ieee)
> >  	bool			retValue = false;
> >  	struct rtllib_network *net = &ieee->current_network;
> >  
> > -	if ((memcmp(net->bssid, BELKINF5D8233V1_RALINK, 3) == 0) ||
> > -	    (memcmp(net->bssid, BELKINF5D82334V3_RALINK, 3) == 0) ||
> > -	    (memcmp(net->bssid, PCI_RALINK, 3) == 0) ||
> > -	    (memcmp(net->bssid, EDIMAX_RALINK, 3) == 0) ||
> > -	    (memcmp(net->bssid, AIRLINK_RALINK, 3) == 0) ||
> > +	if ((ether_oui_equal(net->bssid, BELKINF5D8233V1_RALINK) == 0) ||
> > +	    (ether_oui_equal(net->bssid, BELKINF5D82334V3_RALINK) == 0) ||
> > +	    (ether_oui_equal(net->bssid, PCI_RALINK) == 0) ||
> > +	    (ether_oui_equal(net->bssid, EDIMAX_RALINK) == 0) ||
> > +	    (ether_oui_equal(net->bssid, AIRLINK_RALINK) == 0) ||
> >  	    (net->ralink_cap_exist))
> >  		retValue = true;
> > -	else if (!memcmp(net->bssid, UNKNOWN_BORADCOM, 3) ||
> > -		 !memcmp(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3) ||
> > -		 !memcmp(net->bssid, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3) ||
> > +	else if (ether_oui_equal(net->bssid, UNKNOWN_BROADCOM) ||
> > +		 ether_oui_equal(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM) ||
> > +		 ether_oui_equal(net->bssid, LINKSYSWRT350_LINKSYSWRT150_BROADCOM) ||
> >  		 (net->broadcom_cap_exist))
> >  		retValue = true;
> >  	else if (net->bssht.bd_rt2rt_aggregation)
> > @@ -179,26 +179,26 @@ static void HTIOTPeerDetermine(struct rtllib_device *ieee)
> >  			pHTInfo->IOTPeer = HT_IOT_PEER_92U_SOFTAP;
> >  	} else if (net->broadcom_cap_exist) {
> >  		pHTInfo->IOTPeer = HT_IOT_PEER_BROADCOM;
> > -	} else if (!memcmp(net->bssid, UNKNOWN_BORADCOM, 3) ||
> > -		 !memcmp(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3) ||
> > -		 !memcmp(net->bssid, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3)) {
> > +	} else if (ether_oui_equal(net->bssid, UNKNOWN_BROADCOM) ||
> > +		   ether_oui_equal(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM) ||
> > +		   ether_oui_equal(net->bssid, LINKSYSWRT350_LINKSYSWRT150_BROADCOM)) {
> >  		pHTInfo->IOTPeer = HT_IOT_PEER_BROADCOM;
> > -	} else if ((memcmp(net->bssid, BELKINF5D8233V1_RALINK, 3) == 0) ||
> > -		 (memcmp(net->bssid, BELKINF5D82334V3_RALINK, 3) == 0) ||
> > -		 (memcmp(net->bssid, PCI_RALINK, 3) == 0) ||
> > -		 (memcmp(net->bssid, EDIMAX_RALINK, 3) == 0) ||
> > -		 (memcmp(net->bssid, AIRLINK_RALINK, 3) == 0) ||
> > -		  net->ralink_cap_exist) {
> > +	} else if ((ether_oui_equal(net->bssid, BELKINF5D8233V1_RALINK) == 0) ||
> > +		   (ether_oui_equal(net->bssid, BELKINF5D82334V3_RALINK) == 0) ||
> > +		   (ether_oui_equal(net->bssid, PCI_RALINK) == 0) ||
> > +		   (ether_oui_equal(net->bssid, EDIMAX_RALINK) == 0) ||
> > +		   (ether_oui_equal(net->bssid, AIRLINK_RALINK) == 0) ||
> > +		   net->ralink_cap_exist) {
> >  		pHTInfo->IOTPeer = HT_IOT_PEER_RALINK;
> >  	} else if ((net->atheros_cap_exist) ||
> > -		(memcmp(net->bssid, DLINK_ATHEROS_1, 3) == 0) ||
> > -		(memcmp(net->bssid, DLINK_ATHEROS_2, 3) == 0)) {
> > +		   (ether_oui_equal(net->bssid, DLINK_ATHEROS_1) == 0) ||
> > +		   (ether_oui_equal(net->bssid, DLINK_ATHEROS_2) == 0)) {
> >  		pHTInfo->IOTPeer = HT_IOT_PEER_ATHEROS;
> > -	} else if ((memcmp(net->bssid, CISCO_BROADCOM, 3) == 0) ||
> > -		  net->cisco_cap_exist) {
> > +	} else if ((ether_oui_equal(net->bssid, CISCO_BROADCOM) == 0) ||
> > +		   net->cisco_cap_exist) {
> >  		pHTInfo->IOTPeer = HT_IOT_PEER_CISCO;
> > -	} else if ((memcmp(net->bssid, LINKSYS_MARVELL_4400N, 3) == 0) ||
> > -		  net->marvell_cap_exist) {
> > +	} else if ((ether_oui_equal(net->bssid, LINKSYS_MARVELL_4400N) == 0) ||
> > +		   net->marvell_cap_exist) {
> >  		pHTInfo->IOTPeer = HT_IOT_PEER_MARVELL;
> >  	} else if (net->airgo_cap_exist) {
> >  		pHTInfo->IOTPeer = HT_IOT_PEER_AIRGO;
> > diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h
> > index 2e5debc0373c..6a1a63168319 100644
> > --- a/include/linux/etherdevice.h
> > +++ b/include/linux/etherdevice.h
> > @@ -87,6 +87,11 @@ static inline bool is_link_local_ether_addr(const u8 *addr)
> >  #endif
> >  }
> >  
> > +static inline bool ether_oui_equal(const u8 *addr, const u8 *oui)
> > +{
> > +return addr[0] == oui[0] && addr[1] == oui[1] && addr[2] == oui[2];
> > +}
> 
> Staging drivers are stand-alone, we can not add code outside of the
> driver directory in these patches, sorry.
> 
Okay Sir. When I tried to add static inline bool line in current file, it
showed errors which I was not able to rectify, but when I added that
line to include/linux/etherdevice.h file, and replaced memcmp with
ether_oui_equal, it worked fine.
I may be wrong in application. May I know how to resolve this?

> And as Dan said, this is wrong formatting, did you run checkpatch.pl on
> your changes?
>
Yes Sir, I ran checkpatch.pl, on both files, it showed no errors
against the changes I made.

> thanks,
> 
> greg k-h




[Index of Archives]     [Linux Driver Development]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux